免费阅读 · 免费账户即可贡献Anticars(2000)的继任者

Ram ProMaster

1981– · 3 各代车型 · 已记录8项缺陷 · 3个市场
各代车型

技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。

严重程度全部中等轻微
车型年份
市场全部NA
ProMaster III · 2006–
通报中等发动机NA

通报

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

NHTSA · 制造商通报10230180车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

NHTSA · 制造商通报10221594车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Valve Cover Gasket It is advised to replace the full valve cover assembly if you are experiencing a valve cover leak Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI (right side) or 04893799AH (left side)includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content to facilitate fast track shipment of failed part.

NHTSA · 制造商通报10221366车型年份 2022以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Valve Cover Gasket If you are experiencing a right valve cover leak and plan on replacing only the gasket, the customer may later return for an oil leak. Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content if further questions or help is needed with parts retention returns on valve cover assemblies

NHTSA · 制造商通报10214518车型年份 2022以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Customer complaint may include engine oil leak/consumption.

NHTSA · 制造商通报10190667车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

RADIATOR, Engine Cooling For radiator leak concerns, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please email VIN, dealer code, mileage and picture of the leak to: FCA Redacted Content; FCA Redacted Content

NHTSA · 制造商通报10175430车型年份 2019以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

RADIATOR, Engine Cooling For radiator leak concerns, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please email VIN, dealer code, mileage and picture of the leak to: FCA Redacted Content; FCA Redacted Content

NHTSA · 制造商通报10175018车型年份 2019以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

RADIATOR, Engine Cooling For radiator leak concerns, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please email VIN, dealer code, mileage and picture of the leak to: FCA Redacted Content; FCA Redacted Content

NHTSA · 制造商通报10174098车型年份 2019以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Customer Satisfaction Notification T12 VECI Label The Vehicle Emission Control Information (VECI) label on about 120,000 of the above vehicles may be missing emission control information. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. Incorrect VECI label information could result in denial of vehicle registration for the vehicle in the state of California. A new VECI label must be installed.

NHTSA · 制造商通报10224875车型年份 2015以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

NHTSA · 制造商通报10223854车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

NHTSA · 制造商通报10223853车型年份 2015以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

NHTSA · 制造商通报10218248车型年份 2015以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

RADIATOR, Engine Cooling For radiator leak concerns, please email a picture of the leak area to: javier.calderon@fcagroup.com

NHTSA · 制造商通报10166543车型年份 2019以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

ADAPTER, Engine Oil Filter (Pentastar V6) Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison (248-292-9510) ron.dallison@fcagroup.com Joe Lovell (734) 309-6467 - joe.lovell@fcagroup.com If no response in 15 minutes, proceed with repair. All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor.

NHTSA · 制造商通报10162477车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

NHTSA · 制造商通报10139934车型年份 2015以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Pentastar Oil Filter Adapter All vehicles equipped with a 3.2L or 3.6L engine; If replacing the Oil Filter Adapter (OFA) due to a leak detected between OFA and block, an O-ring kit (68191356AA) is now available to repair OFA/Block Interface leaks. Using dye will assist in determining source of leak. Ensure OFA Cap Oring is seated in the proper groove in the cap and not damaged or cut. Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison Cell (248-292-9510) ron.dallison@fcagroup.com Joe Lovell Cell (734) 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.

NHTSA · 制造商通报10138863车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

NHTSA · 制造商通报10121890车型年份 2015以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报中等发动机NA

通报

"pentastar oil filter adapter before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated service bulletin number 09-008-15. ~ first: Nick morand cell (248) 410-5078 - nick.Morand@fcagroup.Com second: Bob jackson cell (248) 944-0466 - bob.Jackson@fcagroup.Com third: Joe lovell cell (734 309-6467 - joe.Lovell@fcagroup.Com if a response is not received within 15 mins, then proceed with the necessary repair."

NHTSA · 制造商通报10080203车型年份 2015以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

PSU Oil Pump Assy

NHTSA · 制造商通报10248966车型年份 2023以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

Water Quality When Mixed With Engine Coolant

NHTSA · 制造商通报10239957车型年份 2023以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

Emission Recall U90 Catalyst Efficiency

NHTSA · 制造商通报10229778车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

如果无法获得 Mopar 机油滤清器,请使用符合或超过 USCAR36 规范、并且兼容半合成和全合成机油的滤清器。

NHTSA · 制造商通报10227983车型年份 2015–2016自动翻译 · 原文:英语查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

Emission Recall U90 Catalyst Efficiency

NHTSA · 制造商通报10227727车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

Emissions Recall U90 Catalyst Efficiency

NHTSA · 制造商通报10226018车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
ProMaster III · 2006–
通报轻微发动机NA

通报

Engine Mount Bracket If replacing engine mounts and vehicle is equipped with pivot bracket 68157407AA or torque strut 68157408AA you must REPLACE WITH A NEW ISOLATOR 68157408AB OR NEWER AND BOLT 06511657AA. ALSO REPLACE THE TORQUE STRUT BRACKET WITH 68157407AB OR NEWER & 3 NEW BOLTS 06504013. Please note that the AA and AB levels are NOT interchangeable

NHTSA · 制造商通报10222881车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
更早 →

来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。