نشرة
This bulletin is informational and contains information on the various warning lamps that may appear.
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Audi آودي آر8 (كل الأجيال)
النشرات الفنية (TSB) تعليمات إصلاح يرسلها المصنعون إلى وكلائهم بشأن مشكلات معروفة. ليست استدعاءات سلامة، لكنها كثيرًا ما تؤكد وجود عطل.
This bulletin is informational and contains information on the various warning lamps that may appear.
This bulletin contains instructions to reinstall the navigation database in the presence of DTC B126CF1 stored in the 005F.
Software Installation Instructions.
Software Installation Instructions.
Supersedes Technical Service Bulletin Group 40 number 14-41 dated July 2, 2014. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber As a result of a leak because the shock absorber is damaged. Oil may appear on a shock absorber As a result of residue from when the shock was filled during production, or as a result of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
The engine warning light is on after engine replacement. The engine is not running roughly. However, fault codes are stored in the engine control module (ECM). The fault codes occur at light load, between 8% and 14% accelerator pedal position. The programmed values for the misfire adaption are not automatically reset when the memory is deleted. The adaption must be reset after the engine is installed.
DTC 02261 (Data medium - Faulty) is sporadically set in the navigation control module, J401 (address word 37). The vehicle has the MY2014 navigation database installed. The DVD label should read "Version 2013/2014". If the DTC is static, or if there are functional issues with the navigation system, this bulletin does not apply. A change in the MY2014 navigation software is causing the RNS-E unit to trigger this DTC.
Requirements for California dealers added. California-specific customer letter added. To ensure that all Audi R8 services and repairs are performed properly under this action, repair work must be performed at an authorized Audi dealer with the designation Audi R8 Certified Point or Audi R8 Service Point. Under certain driving conditions the MIL may come on even though the vehicle is operating correctly. If the MIL is on because of this issue, your vehicle may not pass an IM (emissions) inspection. As applicable, installation of an engine wiring harness overlay and updated ECM programming.
We would like to inform you that Customer Satisfaction Campaign 24U8 has been revised to include information relevant to dealers and vehicles in the State of California. Under certain driving conditions the MIL may come on even though the vehicle is operating correctly. As applicable, installation of an engine wiring harness overlay and/or updated ECM programming.
To ensure that all Audi R8 services and repairs are performed properly under this action, repair work must be performed at an authorized Audi dealer with the designation Audi R8 Certified Point or Audi R8 Service Point. Under certain driving conditions the MIL may come on even though the vehicle is operating correctly. If the MIL is on because of this issue, your vehicle may not pass an IM (emissions) inspection. As applicable, installation of an engine wiring harness overlay and updated ECM programming.
Supersedes Technical Service Bulletin Group 91 number 11-25 dated November 29, 2011. The navigation DVD or other CD/DVD cannot be ejected. There are no DTCs stored in the corresponding module. The eject button is not stuck. When the eject button is pushed, the drive does not sound as if it is trying to eject the CD/DVD. Vehicles with DVD-based navigation systems now have the navigation DVD installed during production. To prevent theft of the DVD during transportation, the eject button of the navigation drive is disabled. The navigation system itself (e.g., route guidance) functions as specified. The eject buttons of vehicles without DVD-based navigation systems are not disabled during production, but could behave as described in the Condition section of this bulletin. The eject button can be enabled through Guided Fault Finding.
Supersedes Technical Service Bulletin Group 40 number 10-04 dated April 1, 2010. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber. As a result of a leak because the shock absorber is damaged. As a result of residue from when the shock was filled during production, or of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
Audi: High engine speed misfire; no drivability or stalling concern. Dtc p0300 and/or p3001-p0310 (cylinder misfire) is stored in the engine control module (ecm) data memory. The cause is the software of the ecm. Improved ecm software. *pe
توفر هذه النشرة معلومات عند تفريغ بطارية البدء أو تعطلها.
This bulletin provides infomraiton when the exterior lights have moisture accumulation.
This bulletin provides information when the rear parking sensor sometimes does not work, rear parking sensor loose, rear parking sensor fault message.
This bulletin provides information when the horn sound quality is poor.
This bulletin provides informaitn when there is a warning messsage; "Instrument cluster: fault. Limited warning messages. Please contact workshop"; DTC B200096.
This bulletin provides information when there is an issue with wireless charging/wireless charging is not working.
This bulletin provides informatoinw hent here are scratches or a coating on the cover of the instrument cluster, or particles inside of the housing.
This bulletin provides informaitn when there is a warning messsage; "Instrument cluster: fault. Limited warning messages. Please contact workshop"; DTC B200096.
This bulletin provides informaoitn when the rear parking sensor sometimes does not work, is loose, or there is a rear parking sensor fault message.
This bulletin provides information when there are noises from the area around the instrument cluster.
This bulletin provides informaiotn when the starter battery is discharged or defective.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).