動力用電源装置(バッテリ
高電圧バッテリー内のセルモジュールにおいて、電極シートの製造工程が不適切なため、電極シートが破損している可能性がある。そのため、回路が短絡し、警告灯や警告メッセージが表示され、稀にではあるが、高電圧バッテリーが放電し、最悪の場合、火災につながるおそれがある。
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن BMW آي 3 (كل الأجيال)
高電圧バッテリー内のセルモジュールにおいて、電極シートの製造工程が不適切なため、電極シートが破損している可能性がある。そのため、回路が短絡し、警告灯や警告メッセージが表示され、稀にではあるが、高電圧バッテリーが放電し、最悪の場合、火災につながるおそれがある。
BMW of North America, LLC (BMW) is recalling certain 2018 BMW 330e iPerformance, i3 Rex, i3 Sport Rex, X5 xDrive40e, i3 BEV, i3 Sport BEV and 2019 i8 and i8 Roadster vehicles and 2018-2019 530e iPerformance, 530e xDrive iPerformance and 740Le xDrive iPerformance vehicles. Capacitors within the TurboCord Portable Chargers may fail, possibly resulting in a shock hazard or a fire.
De tankontluchtingsslang kan vanwege een ongunstige plaatsing beschadigen. Bij doorschuren kan er brandstofdamp in het motorcompartiment komen.
モータ駆動用電力を発電する原動機(レンジエクステンダー)において、蒸発ガスを燃料蒸発ガス発散抑止装置(キャニスター)から原動機に送るホース(パージエアホース)の配索が不適切なため、当該ホースが電源ケーブルと干渉することがある。そのため、走行時の振動等によりホースが損傷して損傷箇所から蒸発ガスが漏れ、漏れた蒸発ガスが触媒等の高温部位にかかると、最悪の場合、火災に至るおそれがある。
null Inappropriate routing might cause a leakage on the fuel tank ventilation line over time. As a result, fuel vapours may get into the engine compartment resulting in the risk of a fire.
On certain i3 REX models, a section of the fuel tank vent line could chafe against an adjacent ribbed wire protector. Over time, this chaffing could lead to the fuel tank vent line wearing through and leaking. Due to enclosed engine compartment of this vehicle and elevated underhood temperatures, this could increase the risk of a fire causing injury and/or property damage. Correction: Dealers will install a clip between the fuel tank vent line and the adjacent ribbed wire protector to prevent contact, and the fuel tank vent line will be inspected and replaced as necessary.
BMW of North America, LLC (BMW) is recalling certain 2014-2017 i3 REx hybrid electric vehicles. The fuel tank vent line may rub against the ribbed wire protection sleeve of the battery positive (B+) cable, creating a hole in the vent line and causing a fuel vapor leak.
BMW of North America, LLC (BMW) is recalling certain model year 2017 BMW 640i, 640i xDrive, 650i, 650i xDrive, M6, 535i, 535i xDrive, 430i, 430i xDrive, 440i, 440i xDrive, M4, X1 sDrive28i, X1 xDrive28i, i3, i8, Rolls-Royce Dawn, Mini Clubman Cooper, Clubman Cooper S, Cooper All4, Cooper S All4, Mini 4-Door Cooper, Cooper S, Mini 2-Door Cooper, Cooper S, John Cooper Works and 2016 BMW 528i, 528i xDrive, 535i, 535i xDrive, 550i, 550i xDrive, M5 and 535d vehicles. The affected vehicles have seat- mounted side air bag inflator initiators that may fail to ignite during a crash.
Certain vehicles may have been equipped with airbag inflators that do not meet specifications. This could cause affected airbags to fail to deploy properly in the event of a crash, which could increase the risk of injury to the occupants. Correction: Dealers will replace affected airbag modules. Note: Depending on the vehicle in question, the front passenger, knee, side or curtain airbag modules may be affected.
BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. The internal components of the passenger frontal airbag inflator may not have been assembled properly during manufacturing. The passenger frontal airbag’s first stage (only) deployment could be affected, delaying the deployment timing of the second stage. This could result in the right front occupant not receiving the intended protection from the frontal airbag in a low speed or out-of-position crash, increasing the risk of injury to the occupant where airbag deployment is warranted. Correction: Dealers will replace the passenger frontal airbag module.
Certain vehicles, which were parked at the port of entry in Halifax during the ice storms in February 2015, may have been exposed to excessive standing water and salt for an extended period due to this isolated environmental incident. Certain MINI models could have corrosion at the starter motor power supply cable connectors, which could lead to the inability to restart the engine following an engine shutdown by the start-stop (MSA) system, increasing the risk of crash causing injury in a traffic situation. On certain BMW models, the lubrication of some internal components within the steering rack may have been exposed to excessive water or salt which could result in higher than normal steering effort or steering binding, increasing the risk of a crash causing injury and/or damage to property. In addition, electrical wires and/or connectors in all affected vehicles may have been exposed to water or salt, which could lead to increased electrical system resistance, and increase the risk of fire causing injury and/or damage to property. Correction: Owners should contact their selling Retailer regarding this recall. Affected vehicles will be inspected. Some vehicles will be taken out of service immediately and owners will be provided with temporary transportation until a new replacement vehicle is available. All other vehicles are cleared of this safety concern and may continue to be driven until a new replacement vehicle is available. Due to potential concerns about long term vehicle quality, all affected vehicles will ultimately be removed from service.
BMW of North America, LLC (BMW) is recalling a certain model year BMW i3 vehicle manufactured March 31, 2014, and certain 2014 MINI Cooper Hardtop vehicles manufactured February 2, 2014 to May 30, 2014. The affected vehicles may have been manufactured with an air bag inflator that was not assembled correctly. This could cause the air bag to not deploy properly in the event of an accident.
During supplier�s production process of the battery cells a manufacturing defect occurred with the winding of cell-internal films for the high-voltage battery.
The micro gas generator within the front seatbelt�s retractor may have been damaged and may not act according to the specification in the event of an accident.
The material quality of seat and seatbelt screws may not be according to specification.
The control ring of the recliner of the backrest in the second seat row may break due to insufficient material performance.
The air bag control unit may have been equipped with a defective sensor for the rollover detection.
The Electric Motor Electronics (EME) printed circuit board was not manufactured according to specifications
BMW of North America, LLC (BMW) is recalling certain 2019 i3 BEV, i3 REx, and i8 vehicles. A circuit board problem within the Electric Motor Electronics (EME) module may shutdown the supply of high-voltage electrical power.
대상 차량은 *양산 전 차량으로 생산하여 모터쇼 및 신차 출시 전 이벤트용 등으로 활용한 뒤 독일 본사로 반송이 에정되어 있었으나 내부 이력 관리 오류로 인하여 해당 차량이 일반 고객에게 판매된 것이 확인됨. 해당 차량에 대한 내부 기록 관리 미흡으로 인하여 어떤 부분이 실제 양산과 다른지 상세 내용 확인이 불가하여 정확한 결함원인을 파악하기 어려울 수 있는 가능성에 따른 리콜 (*양산: 규격화된 동일한 차량을 대량으로 생산하는 체제) BMW 320d ED: 2010.12.10 BMW 435d xDrive Gran Coupe: 2014.03.13 BMW 520d Touring: 2012.03.29 BMW 520d xDrive: 2013.05.07 BMW 525d: 2013.05.08 BMW 525d xDrive: 2011.11.22 BMW 525d xDrive Touring: 2011.11.23 BMW 528i xDrive: 2013.05.07 BMW 640i Convertible: 2011.07.14 BMW 730d xDrive: 2012.11.14 BMW 740d: 2012.11.19 BMW 740d xDrive: 2012.03.21 BMW 750Ld xDrive: 2014.01.23 BMW 750Li xDrive: 2010.11.25 BMW GT 30d xDrive: 2012.03.22 BMW i3: 2013.10.28~2013.10.29 MINI Cooper D Clubman: 2015.08.20 MINI Cooper S Clubman: 2015.08.20 MINI John Cooper Works: 2012.12.05 MINI John Cooper Works Coupe: 2012.12.05
대상차량은 양산 전 생산 모델로 모터쇼 출품 및 신차 판매 전 이벤트 행사 등 제한된 용도로 생산된 차량입니다. 이에 따라 실제 양산 차량과 어떠한 부분이 다른지 상세 내용 확인이 불가하여 결함이 있는 구조장치를 정확히 찾기 어렵습니다. 재구매한 차량은 점검 후 폐차합니다.
Door een defect in een printplaat kan de elektrische motor uitvallen.
駆動用モーターの制御ユニットに使用される配線基板において、メッキの工程管理が不適切なため、メッキが正しく行われていないものがある。そのため、駆動系統の警告メッセージが表示し、制御ユニットの機能が一時的に停止して、動力の伝達ができず、最悪の場合、走行できなくなるおそれがある。
Issue: A problem with the electric motor electronics (EME) module could cause a sudden loss of power to the drive motor. Note: The 12-volt electrical system would still function, so power steering and braking would not be affected. Safety Risk: A sudden loss of motor power could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct them to take the vehicle to a dealer to replace the electric motor electronics module.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).