Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).
NHTSA · نشرة المصنع10149497معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
BMW Parts Bulletin TEC7W Rear Silencer with Exhaust Flap Return BMW AG has requested an inspection of the following part numbers: 18 30 8 604 208, 18 30 8 604 209 Stock should not be sold or installed on any vehicle. All Rear Silencer with a manufacturing date before 22.04.14 (DD.MM.YY) need to be returned. Parts with manufacturing date from 22.04.14 are ok to use. (Illustration below) Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7W must appear in the text of your TEC claim. TEC7W is valid from September 26, 2014, through October 10, 2014. The deadline for filing a claim under TEC7W is October 10, 2014. All parts must be returned to your facing RDC no later than October 24, 2014. Please re-order the same part numbers as needed.
NHTSA · نشرة المصنع10148048معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Subject regarding vehicles produced on 7/27/99 and 7/28/99 with an incorrect coolant hose installed. The hose connects the coolant explansion tank to the coolant pipe on the left side of the engine and is approximately 2cm (3/4 in.) too short. *tt
NHTSA · نشرة المصنع611086معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
"إرشادات فحص CPO (MINI NEXT): المحركات التي تتطلب حالة TSE PuMA. قد تحتاج المركبات التي لديها سجل صيانة مشكوك فيه في "خدمة زيت المحرك" إلى مراجعة إضافية ومراجعة TSE قبل الاستمرار في عملية فحص CPO."
The customer complains of loss of performance and turbocharger noise. CAUSE The turbocharger oil supply may be restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly.
NHTSA · نشرة المصنع10149578معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Delivery Stop: 2013 3 Series Emissions Label Update. Vehicle Emissions Control Information (VECI) labels are now available for vehicles affected by the Delivery Stop. Refer to Service Information bulletin B71 01 13 for complete details.
NHTSA · نشرة المصنع10149496معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
"MMINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replacem
NHTSA · نشرة المصنع10147964معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
"MINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replaceme
NHTSA · نشرة المصنع10147988معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
?SI B11 01 15December 2015 EngineTechnical Service This Service Information bulletin supersedes SI B11 01 15 dated October 2015. designates changes to this revision SUBJECT BMW Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.
NHTSA · نشرة المصنع10147859معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Update 2: Availability of Fuel Pump 16 14 7 708 047. Due to limited availability, Fuel Pump Assembly 16 14 7 708 047 has been placed on hold pending arrival of additional inventory. At this time, inventory will only be released to dealers with motorcycles down in the workshop for repair. Until further notice, If you have a motorcycle in urgent need of this part please send an e-mail request to motorradaftersales@bmwna.com with the following information: Email Subject: 7708047 Request Dealer XXXXX
NHTSA · نشرة المصنع10147893معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Due to previous programming errors, affected vehicles had the CBS oil service conversion performed as part of the N63 CCP campaign (SI B11 16 14), but the desired interval change to 12 months/15,000 km/10,000 miles was not completed correctly.
NHTSA · نشرة المصنع10147865معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
MINI Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.
NHTSA · نشرة المصنع10147905معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
BMW Motorrad is issuing this notification to the effect that the telescopic fork oil used to date, which has an SAE viscosity class of 7.5, has been changed to an oil with SAE viscosity class 11.5.
NHTSA · نشرة المصنع10147846معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Engine Replacement: Filling Engine with Engine Oil Before First Start. If the new or remanufactured replacement engine is started to determine electronically if the engine is filled with the appropriate amount of engine oil, damage to the replacement engine can occur immediately. The engine may have some residual engine oil from assembly, but this is not enough engine oil to properly lubricate the engine to measure the engine oil level electronically when it is started for the first time. Further, the electronic engine oil measurement is only operational when the engine is running at its full operating temperature. Checking the engine oil without the engine running at operating temperature will lead to an incorrect or incomplete measurement.
NHTSA · نشرة المصنع10147126معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The customer complains that after refueling the fuel gauge stays on empty, or the operation of the fuel gauge is erratic on vehicles produced before december 15, 2000. *tt
NHTSA · نشرة المصنع616689معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Customers may complain that the coolant temperature gauge goes in and out of the red zone or that the heater output is too low on vehicles with m52tu engines produced from 9/98. *tt
NHTSA · نشرة المصنع613550معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Customer complaints of engine running rough during first few minutes of engine operation and or engine hesitates / poor throttle response during first few minutes of engine operation following initial cold start on various models produced from 3/96 to present. *tt
NHTSA · نشرة المصنع611091معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).