نشرة
Service Update for Inventory and Customer Erroneous Electric Park Brake Message and Light, DTC C027D Expires with Base Warranty
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Chevrolet Volt
النشرات الفنية (TSB) تعليمات إصلاح يرسلها المصنعون إلى وكلائهم بشأن مشكلات معروفة. ليست استدعاءات سلامة، لكنها كثيرًا ما تؤكد وجود عطل.
Service Update for Inventory and Customer Erroneous Electric Park Brake Message and Light, DTC C027D Expires with Base Warranty
FMVSS NONCOMPLIANCE RECALL - Front Brakes Lock During ABS, Stability Control, or Traction Control Activation
No Crank/No Start, Dead Battery Due to Parasitic Drain/Discharge.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
12266 - Service Update. During vehicle startup, the Electric Park Brake telltale and the Service Electric Parking Brake telltale may illuminate in error. Dealers are to reprogram the Electronic Parking Bracke Control Module.
This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.
This preliminary bulletin provides a procedure to reprogram the power steering module to correct the customers concern of the MIL on and a drop in power steering assist.
This preliminary informational bulletin provides a procedure to reprogram the electronic power steering control module for comments regarding a indicator lamp illuminated and DTC C0544 and U0415 set.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.
This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.
12241 - customer satisfaction program. Vehicles can be affected by incorrect calendar date information sent through the telematics systems. If a significantly incorrect date is received (for example, 00/00/0000), and the vehicle is in the "delayed rate and departure time" charging mode, the hybrid powertrain control module (hpcm2) may reset and open the propulsion power relays. As a result, the electric motor has temporarily stopped working due to this software anomaly when their vehicle is in the delayed time and rate charge mode.
15642 - special coverage. On some 2011 model year chevrolet volt vehicles, the airbag indicator may illuminate. This may be caused by the sensing and diagnostic module (sdm) monitoring an increase in the resistance of the driver or passenger side-impact airbag deployment loop circuits. This increased resistance may be caused by loose terminal crimps in either the driver or passenger seat mounted side-impact airbag wiring harness connectors. Dealers are to inspect for the presence of specific diagnostic trouble codes (dtcs) and, if necessary, bypass the harness connectors and repair wiring in the driver and/or passenger front side-impact airbag deployment loop circuits. The repairs will be made at no charge to the customer.
15642 - special coverage. On some 2011 model year chevrolet volt vehicles, the airbag indicator may illuminate. This may be caused by the sensing and diagnostic module (sdm) monitoring an increase in the resistance of the driver or passenger side-impact airbag deployment loop circuits. This increased resistance may be caused by loose terminal crimps in either the driver or passenger seat mounted side-impact airbag wiring harness connectors. Dealers are to inspect for the presence of specific diagnostic trouble codes (dtcs) and, if necessary, bypass the harness connectors and repair wiring in the driver and/or passenger front side-impact airbag deployment loop circuits. The repairs will be made at no charge to the customer.
Special Coverage Adjustment - Side Impact Airbag Connectors
Passenger Presence System (PPS) May Command Seat Belt Reminder Chime Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
Buick/chevrolet/gmc/opel: Power steering assistance malfunctions while either turning left or right. Models 2012 opel ampera, volt, 2013 lacrosse, regal, equinox, malibu, terrain, opel insignia. *pe updated 08/1/2013 *js updated 11/25/2013 *js updated 1/13/15. *pe
Gm: See document search button for owner letter. Driver airbag inspection. *kb updated 5/23/12. *pe
Gm: See document search button for owner letter. Carpeted floor mats missing. Dealers are to install carpeted floor mats when mats become available. *js
General motors: Reservoir for power steering fluid is heat damaged and leaking. May caused problems with power steering pump. *pe
Buick/chevrolet: It is hard to remove driver's side air bag due to revised spring design, which causes higher retaining force between driver's side air bag and steering wheel. *pe
Chevrolet: On certain vehicles, after updated calibrations were installed, may exhibit a possible and an estimated electric range drop. *pe updated 12/7/11. *pe
Gm: The steering wheel adjustment is binding or sticking. This is caused by the steering wheel lever adjustment nut tightening. *rm
Gm: There is an engine oil leak at the front engine cover. 2011 volt. *rm updated 6/27/11. *pe
Gm: There are seat belt problems: Difficulty latching and unlatching buckle. Buckle release button is sticking. Seat belt warning light illuminated. Likely caused by sticky beverages that are spilled into the buckle assembly. *rm updated 4/3/12. *pe
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).