Certain 2019 Model Year Police Interceptor Utility Vehicles Equipped with a 3.7L Engine Catalytic Converter Extended Coverage In the affected vehicles, it may be possible that aggressive law enforcement driving maneuvers can result in an overheated catalytic converter, catalyst degradation, and an illuminated malfunction indicator light (MIL) with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM)
NHTSA · نشرة المصنع10231023سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level using the Integrated Diagnostic System (IDS). Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10216541سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2016 Explorer vehicles equipped with factory remote start (on the key fob) may exhibit erratic operation of the climate control seats and/or heated steering wheel during a remote start event. Examples of this may include: cooled seats when the last setting commanded heated seats, inoperative/deactivated heated steering wheel, etc. This may be due to a software concern within the HVAC control module. To correct this condition, update the HVAC control module to the latest software level using the latest version of the IDS service scan tool. For claiming use causal part number 19980 and refer to applicable labor times found in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10207116سنوات الطراز 2016معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2016-2017 Ford and Lincoln vehicles with a new body control module (BCM) installed may exhibit a programming error when using IDS versions 122.03 through 123.01 stating 'Data Corrupt' or 'Configuration Failed, would you like to retry?'. IDS scan tool version 123.02 contains a fix for this programming error. Install IDS version 123.02 or later from PTS > Rotunda tab > Diagnostic Tool Support > Download Software. Once installed, perform the BCM programmable module installation (PMI). Refer to Workshop Manual (WSM), Section 419-10 > Removal and Installation.
NHTSA · نشرة المصنع10201582سنوات الطراز 2016معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2016-2017 Ford and Lincoln vehicles with a new Body Control Module (BCM) installed may exhibit a programming error using IDS v122.03 and newer stating "Data Corrupt" or Configuration Failed, would you like to retry?. A temporary work around has been released to complete the BCM programming process. Uninstall IDS from the computer. Run the IDS clean up utility tool located on PTS > Rotunda Tab > Diagnostic Tool Support > IDS Support > IDS troubleshooting guide. Install IDS v122.01 (122_FULL) by copying the following link into an internet address bar https://www.fordservicecontent.com/Ford_Content/IDS/SoftwareUpdates/IDS-122.01_full.exe. Retry the BCM Programmable Module Installation (PMI) using IDS level 122.01. Monitor OASIS for updates.
NHTSA · نشرة المصنع10201024سنوات الطراز 2016معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
In some of the affected vehicles, Hill Start Assist (HSA), a driver convenience feature, is not enabled due to a software issue in the Anti-lock Brake System (ABS) module. The HSA feature makes it easier to pull away from a stop when a vehicle is on a slope. HSA should be enabled when the driver removes their foot from the brake pedal after holding brake pressure for 2-3 seconds on a slope.
NHTSA · نشرة المصنع10178057سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2019 Explorer/Police Interceptor Utility vehicles built on 10-Sep-2018 and through 07-Feb-2019 may exhibit a lack of hill start assist when the vehicle is stopped on an incline greater than 1.5 degrees. If no diagnostic trouble codes (DTCs) are stored in the anti-lock brake system (ABS) module, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 2C219 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10156481سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10149757سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Certain 2018 Model Year Explorer And Police Interceptor Utility Vehicles Key Off Load Battery Drain Certain 2018 Model Year MKZ Hybrid Vehicles Equipped with the Magnetic Appearance Package - Accelerator Pedal and Brake Pedal Cover Replacement
NHTSA · نشرة المصنع10148743سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT/Fiesta vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part BRAKE and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10144938سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10144946سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT/Expedition/Navigator vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part 2552 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10144948سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part BRAKE and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10144933سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 Explorers equipped with Platinum trim level built on 25-Oct-2017 and through 01-May-2018 may intermittently display a "Hill Descent Control Fault" message in the IPC briefly at start up without any diagnostic trouble codes (DTCs) stored in the anti-lock brake system (ABS) module. Reprogram the IPC using the appropriate Ford scan tool or equivalent release 110.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA · نشرة المصنع10144208سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 Explorers equipped with Platinum trim level built on 25-Oct-2017 and through 01-May-2018 may intermittently display a "Hill Descent Control Fault" message in the IPC briefly at start up without any diagnostic trouble codes (DTCs) stored in the anti-lock brake system (ABS) module. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
NHTSA · نشرة المصنع10143081سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2018 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition, remove the TCU fuse for 5 minutes then reinstall. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
NHTSA · نشرة المصنع10137130سنوات الطراز 2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2017 Explorer, Taurus, Police Interceptor vehicles built on 19-May-2017 and through 30-May-2017 equipped with a fixed brake pedal assembly may exhibit a brake drag concern or residual pressure in the brake system with the brake pedal fully released. This may be due to an interference condition between the brake pedal arm stop lamp switch bracket and the booster push rod clevis pin bracket. Inspect for a touch condition between the brake pedal arm stop lamp switch bracket and the brake booster push rod clevis pin bracket. If a touch condition exists, replace the brake pedal assembly. For claiming, use causal part 2C434 and applicable labor operations in section 2 of the service labor time standards (SLTS) manual.
NHTSA · نشرة المصنع10125073سنوات الطراز 2017معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
2017 vehicles equipped with a 2.0L GTDI, 2.3L GTDI, or 2.5L PFI engine will either be equipped with a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a crankshaft timing sprocket with laser etched faces and no diamond washers (late build). If equipped, diamond washers should be cleaned, inspected and reused, if undamaged. Diamond washers should never be installed along with a laser etched crankshaft timing sprocket. Related WSM procedure information is in the process of being updated.
NHTSA · نشرة المصنع10119671سنوات الطراز 2017معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some 2016-2017 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
NHTSA · نشرة المصنع10119678سنوات الطراز 2017معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).