نشرة
Some vehicles may exhibit a rubbing type noise when turning the steering wheel. Follow the procedure in this TSB to inspect the source of the noise and, if necessary, replace the Steering Shaft Dust Cover.
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Genesis جينيسيس جي في80 (كل الأجيال)
النشرات الفنية (TSB) تعليمات إصلاح يرسلها المصنعون إلى وكلائهم بشأن مشكلات معروفة. ليست استدعاءات سلامة، لكنها كثيرًا ما تؤكد وجود عطل.
Some vehicles may exhibit a rubbing type noise when turning the steering wheel. Follow the procedure in this TSB to inspect the source of the noise and, if necessary, replace the Steering Shaft Dust Cover.
Some GV80 (JX1) vehicles may exhibit a rubbing/dragging noise when rotating the steering wheel due to a misaligned clock spring. Airbag operation is not affected. Follow the procedure in this TSB to inspect and, if necessary, replace the multifunction switch.
The California Air Resources Board has determined that certain 2025 model year Genesis GV80 and 2025 model year Genesis GV80 Coupe vehicles may be releasing air pollutants which exceed Federal and California standards. Genesis has become aware that some vehicles may NOT experience a warning lamp illumination related to the fuel level sensor circuit. Your Genesis retailer is conducting a service campaign to update the Engine Control Module (ECM) to improve the Fuel Level Sensor Logic.
Certain 2025MY GV80 and GV80 Coupe (JX1) vehicles equipped with the 3.5T-GDI Lambda III engine may NOT experience a warning lamp illumination of DTC P0461/P2066 when the calculated fuel consumption and the fuel consumption calculated from the fuel level sensor signal is over its threshold value. Follow the service procedure outlined in this bulletin to update the engine control module to revise the fuel level sensor warning light logic.
Certain 2025MY GV80 and GV80 Coupe (JX1) vehicles equipped with the 3.5T-GDI Lambda III engine may NOT experience a warning lamp illumination of DTC P0461/P2066 when the calculated fuel consumption and the fuel consumption calculated from the fuel level sensor signal is over its threshold value.
Certain GV80 (JX1) vehicles may have a condition where the vehicle may display warning lights due to a temporary voltage drop causing the Steering Wheel Remote Control (SWRC) to be inoperable. Follow the instructions in this TSB to update the software.
Certain 2025MY GV80 (JX1) vehicles may exhibit the front radar warning light coming on at initial start-up, and non-operation of the Smart Cruise Control/Forward Collision Avoidance (SCC/FCA) systems, which are part of the Advanced Driver Assistance System (ADAS). Additionally, DTC C160404 (ECU Hardware Error) may set. Normal operation of these systems returns after restarting the vehicle. Follow the procedure in this bulletin to update the software for the Front Radar (SCC) system to resolve these symptoms.
Certain GV80 (JX1) vehicles may have a condition where the vehicle may display warning lights due to a temporary voltage drop causing the Steering Wheel Remote Control (SWRC) to be inoperable. Follow the instructions in this TSB to update the software.
Certain 2024MY GV80 (JX1) vehicles may have had the incorrect AWD ECU installed. These vehicles may have the following conditions: Minor shift tuning logic Auto 4WD is always active Activation light does not illuminate on when 4WD is activated Follow the procedures listed below to inspect, and if necessary, replace the AWD ECU with the correct part.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Your vehicle may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is conducting a campaign to update the Central Control Panel (CCP) Software at NO CHARGE to you.
Some GV80 (JX1) vehicles may have an inoperable horn due to exposure to moisture from the horizontal mounting position. This bulletin provides instructions to replace and vertically mount the horns.
Certain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode.
Certain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode. This bulletin provides instructions to perform a software update for the CCP.
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
This bulletin provides a diagnostic and inspection procedure for addressing parking camera error conditions for G80 (RG3), GV70 (JK1/JK1A), and GV80 (JX1) vehicles. Follow the information in this TSB on the symptoms, causes, and associated diagnostic steps for camera issues based on the screen color and DTCs.
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizons communication network.
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
Genesis Motor America has noted that several vehicles were impacted by a telecommunications outage that occurred on Sunday, February 9th , resulting in the potential loss of connectivity or interruptions when attempting to use Connected Car Services functions. Voice Recognition, Sports Media, and Weather will not be available. Retailer stock and retailed vehicles are both affected. If a guest calls in and vehicle is experiencing issues related to Connected Car Services, please have them come into the retailer to assist with resetting the Connected Car Services Data Communication Unit (DCU) and utilize TSB 25-BE-003G posted on Genesis Tech Info.
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Service (CCS) functions. This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.
Certain GV80 (JX1) vehicles may have a Genesis Connected Services malfunction or be unable to have Genesis Connected Services setup. This bulletin provides instructions to reset the network in Engineering Mode to prevent the Data Concentrator Unit (DCU) modem from experiencing a Genesis Connected Services Not Open error.
Some 2025MY GV80 (JX1) vehicles may exhibit battery performance degradation due to 12 V battery discharge, affecting customer satisfaction. If battery discharge occurs, follow the procedures outlined in TSB 24-EE-005G, GDS Battery Diagnosis Function, then submit a claim using the appropriate Op Code specified in this TSB.
Genesis has become aware that some vehicles may experience battery drain while the ignition is OFF.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).