🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Lexus آر إكس (كل الأجيال)
كل ما يخص Lexus آر إكس بجميع أجياله: الأعطال وحملات الاستدعاء والنشرات الفنية والنقاشات. اختر جيلًا لتضييق النتائج.
64 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 1998–2002), typically at around 103,000 miles. Reported consequences: 30 crashes, 1 fire, 19 injuries.
38 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2002), typically at around 110,000 miles. Most often named: frontal (26%). Reported consequences: 31 crashes, 32 injuries.
30 owners in the United States reported problems with the brakes of this car to NHTSA (model years 1999–2002), typically at around 114,000 miles. Most often named: antilock/traction control/electronic limited slip (17%). Reported consequences: 3 crashes, 1 fire.
25 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2002), typically at around 75,000 miles. Most often named: wiring:front underhood (20%). Reported consequences: 7 fires.
20 owners in the United States reported problems with the seat belts of this car to NHTSA (model years 1999–2002), typically at around 62,000 miles. Most often named: front:retractor (25%), front:anchorage (15%). Reported consequences: 4 crashes, 5 injuries.
Issue: On certain vehicles, the front steering knuckle(s) may not have been manufactured properly. As a result, the knuckle(s) could break and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Lexus will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the steering knuckle(s).
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 Lexus TX350, RX350 Hybrid, RX350, RX500 Hybrid, TX500 Hybrid, Toyota Grand Highlander, and Grand Highlander Hybrid vehicles. Due to a manufacturing error, the front steering knuckles may crack and break, which can result in a loss of vehicle steering control.
En raison d'un problème logiciel, l'unité de commande d'assistance au stationnement qui fonctionne avec le moniteur de vue panoramique (pvm) pour afficher l'image de la caméra de recul peut geler brièvement lors de la sauvegarde si la marche arrière est sélectionnée peu de temps après le démarrage du véhicule. en outre, la caméra de recul peut ne pas apparaître la prochaine fois que le véhicule est démarré si le véhicule est allumé et éteint à nouveau dans un court laps de temps. cela peut augmenter le risque d'accident avec une personne ou un autre véhicule lors d'un événement de soutien.
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Lexus Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2027 model year RX 350, RX 350h, RX 450h+, and RX 500h vehicles
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required to ensure proper operation and optimal battery life.
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
تُصنَّف الأعطال والنقاشات حسب الجيل: اختر جيلًا أعلاه لإضافة مشاركتك.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0).