يجمع هذا الملف الأعطال المعروفة لـMercedes-Benz الفئة إي W212، التي كتبها المجتمع ووثّقها بالمصادر. القراءة مجانية، والحساب المجاني يتيح المساهمة. يحصل العطل على الختم عندما يعتمده عدد كافٍ من المساهمين الموثوقين.
115 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2010–2015), typically at around 49,000 miles. Reported consequences: 7 crashes, 11 fires, 5 injuries.
✓ تحليل Mecafile لبيانات رسمية2010–2015معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
96 owners in the United States reported problems with the body and structure of this car to NHTSA (model years 2010–2015), typically at around 70,000 miles. Most often named: body (75%). Reported consequences: 11 crashes, 11 injuries.
✓ تحليل Mecafile لبيانات رسمية2010–2015معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
96 owners in the United States reported problems with the engine of this car to NHTSA (model years 2010–2015), typically at around 50,000 miles. Reported consequences: 6 crashes, 6 fires, 5 injuries.
✓ تحليل Mecafile لبيانات رسمية2010–2015معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
الشكوى: صوت طقطقة معدني صادر من منطقة مكبرات الصوت الموجودة في الأبواب.
السبب: قيد التحليل.
الإجراء العلاجي: لتضييق نطاق السبب، قم أولاً بإزالة تغطية الباب الداخلية. إذا استمر الصوت حتى بعد إزالة تغطية الباب، فتابع التشخيص باتجاه مكبر الصوت، وإذا لزم الأمر، أنشئ حالة TIPS مع فيديو توضيحي كمرفق. ملاحظة: يرجى الرجوع إلى هذه الوثيقة في مطالبة الضمان، وبعد اكتمال التشخيص، اختر رمز العطل بحسب الجزء المكوّن الذي يسبب المشكلة. إذا توقف الصوت عند إزالة تغطية الباب، فيرجى المتابعة وفقاً لـ LI72.10P067691.
معلومات: في هذه الحالة، لا تستخدم رمز عطل لمكبرات الصوت في مطالبة الضمان!
**الشكوى**
زيارة متكررة للورشة بسبب اهتزاز المركبة أثناء الفرملة من سرعة 60 MPH.
**ملاحظة:** على الرغم من أن الأعراض تشبه اهتزاز الإطار أو العجلة، فغالباً ما يكون من الواضح أنه مختلف إذا كان يحدث في جميع الأوقات أو فقط أثناء الفرملة.
**السبب**
رغم أن سبب الاهتزاز هو على الأرجح الارتجاج الجانبي المفرط للقرص أو لمحور/محمل العجلة، فإن النظام ككل يحتاج إلى فحص بحثاً عن عوامل محتملة أخرى:
1. تلف ناتج عن حادث تصادم سابق.
2. فترات توقف طويلة للمركبة دون تدوير المكونات الدوارة.
3. ارتجاج جانبي في محمل العجلة/المحور.
4. تم شد واجهة تركيب العجلة بشكل زائد (لم يتم اتباع إجراءات عزم الشد في WIS).
5. تم تعديل واجهات التركيب بشكل مفرط (طلاء، خدش، ثني، إلخ...).
**الإجراء العلاجي**
اقرأ ورقة العمل المرفقة بالكامل قبل التنفيذ. بعد التنفيذ، يرجى مراجعة الصفحة الأخيرة وتنفيذ الأعمال وفقاً لها.
**ملاحظة:** هذه الوثيقة ليست موافقة مسبقة ولا تتناول الضمان. الغرض منها هو التشخيص فقط. إذا كانت هناك أي أسئلة حول كيفية المتابعة، أو إذا تم تنفيذ ورقة العمل وعادت المركبة بنفس الشكوى، يرجى إجراء القياسات الموضحة في ورقة العمل مرة أخرى، وفتح حالة TIPS لفريق الهيكل (Body) والشاسيه (Chassis) والترفيه (Entertainment).
Complaint Only vehicles with a variable transfer case are affected. This can be identified through control unit N45 or N15/7 in the quick test. When accelerating with light load, vibrations or jolting sensation may come from the drivetrain. It may be mistaken for a harsh shift. Cause Modified oil quality of the transfer case over time Remedy 1. Check initial quick test for faults in the following control units. N45 or N15/7 Allwheel drive (ARS) N127 'Drivetrain' (PTCU) control unit Y3/8 Transmission control for 9gear transmission (VGS) N3/10 Engine electronics for combustion engine If faults are present: Process them as per the guided test in Xentry. If no faults are present: 2. Check the transmission oil level If the oil level is correct: 3. Unplug the connector for the transfer cases control unit and reassess the vehicle on a subsequent test drive If the complaint no longer occurs with the control unit disconnected: 4. Perform an oil change of the transfer case according to WIS specifications Collect an oil sample of the original fluid 5. Complete all transfer case Techin processes located under VG Control Unit > Adaptations Resetting the oil service data Calibration of N15/7 5. Perform road test of vehicle to bring transmission to operating temperature (>60C ) 6. Operate vehicle in full circle with steering at full lock 5x to the left 5x to the right Return the vehicle to the client and request they drive the vehicle for at least 200 miles and return if the concern is not resolved. The extended drive will ensure the clutches are properly conditioned with the new oil and should resolve the concern. If this LI has already been applied to the vehicle, please submit a TIPS case to the Powertrain inbox with the following information: Initial quick test with fault freeze frame data Initial transmission EEPROM data VGS and Transfer Case Control Unit Log (N45 or N15/7) Special Acquisition Data .txt file (Transfer Case Control Unit > Special Procedures > Procedures for support queries to market support > Special Data Acquisition) Photo of the original oil condition What color was the fluid drained from the transfer case before the oil change? Was an oil sample collected, and can you provide a photo of the original fluid? What color and part number fluid was used during the oil change? How far was the vehicle driven after?
NHTSA · نشرة المصنع11037987سنوات الطراز 2015معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).