على بعض طرازات شاحنات البيك أب والمركبات الركابية وسيارات الدفع الرباعي (SUV) وهياكل المركبات المنزلية المتنقلة (Motor Homes)، قد يتسرب مفتاح إلغاء تفعيل نظام التحكم في السرعة (Cruise Control) داخليًا تحت ظروف معينة، ثم قد يسخن أو يدخن أو يحترق.
NHTSA · الولايات المتحدة3 أغسطس 200707V336000سنوات الطراز 1994ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
يمكن أن ينفصل الخرطوم المطاطي لسائل ناقل الحركة، الذي يربط ناقل الحركة بمبرد زيت ناقل الحركة الموجود في المشع، عن ناقل الحركة، مما يؤدي إلى تسرب سائل ناقل الحركة.
NHTSA · الولايات المتحدة5 نوفمبر 199393V180000سنوات الطراز 1993ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
هيّ التعرض المطوّل لأشعة الشمس قد يتسبب في تدهور الغلاف البلاستيكي لتجميعة لسان حزام الأمان الأمامي الذي يثبّت قضيب القفل، وانزياحه من موضعه. وقد يؤدي ذلك إلى انفصال اللسان عن شريط حزام الأمان، مما يجعل حزام الأمان عديم الفائدة لشاغل المركبة.
تصحيح: سيتم إبلاغ المالكين بأن شركة فورد ستقوم بإصلاح أحزمة الأمان التي تعاني من هذه الحالة.
وزارة النقل الكندية28 سبتمبر 19921992117سنوات الطراز 1984–1985ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
The plastic sleeve in the front safety belt tongue assembly which retains the lock bar can deteriorate from prolonged exposure to sunlight and become displaced, causing the tongue to detach from the safety belt webbing.
NHTSA · الولايات المتحدة29 أبريل 199292V063000سنوات الطراز 1984–1985معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
على المركبات المزودة بنظام efi أو cfi، قد ينفصل وصلة خط الوقود ذات القفل الزنبركي المستخدمة لتوصيل خطي إمداد الوقود والعودة بأنابيب توزيع الوقود في efi أو بجسمات الخانق في cfi، وكذلك وصلات خطوط الوقود الأخرى القريبة من لوحات لوحة القيادة في بعض المركبات، أثناء استخدام المركبة. وإذا حدث ذلك، فسيؤدي إلى تسرب الوقود، مما يشكل خطر نشوب حريق في المركبة.
التصحيح: سيتم تركيب مشابك حابسة للوصلات في المركبات المتأثرة.
ملاحظة: مركبات Escort مزودة بنظامي efi وcfi. مركبات Lynx مزودة بنظام cfi فقط.
efi - حقن الوقود الإلكتروني
cfi - حقن الوقود المركزي
وزارة النقل الكندية9 سبتمبر 19871987098سنوات الطراز 1986–1987ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
The tandem power brake booster rear shells may have been produced with reduced wall thicknesses. Repeated brake applications could cau se such a shell to crack and the booster assembly to come apart.This could result in a total loss of braking capabilty without prior warn ing and present the possibility for loss of control and vehicle cras h.
وزارة النقل الكندية31 مايو 19851985070سنوات الطراز 1985معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The forward screw which provides part of the attachment between the driver`s seat back assembly and the seat cushion frame could fracture and permit the driver's seat back to pivot rearward. Such a condition could adversely affect the driver's ability to control the vehicle and could result in a vehicle crash. Correction: New driver's seat cushion attachment screws will be installed on affected vehicles.
وزارة النقل الكندية17 مايو 19881988066سنوات الطراز 1981–1983معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Brake booster rear shells may have reduced wall thicknesses which could cause the shell to break. Consequence of defect: Repeated brake use could cause the shell to crack and the booster assembly to come apart. Service brakes capability would be totally lost without warning and could result in an accident.
NHTSA · الولايات المتحدة21 مايو 198585V068000سنوات الطراز 1985معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Carburetor throttle shafts may be susceptible to dirt contamination and wear of the bearing coatings. This could cause the secondary throttle plates to remain partially open after the driver has released the accelerator pedal. This this were to occur, engine speed would not return to idle potentially affecting vehicle control and stopping distances.
وزارة النقل الكندية28 سبتمبر 19841984117سنوات الطراز 1984معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".
NHTSA · الولايات المتحدة20 ديسمبر 198383V134000سنوات الطراز 1984معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.
وزارة النقل الكندية17 ديسمبر 19831983114سنوات الطراز 1984معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Some of the vehciles affected by the recall may have been produced with incorrect hoods - the incorrect hoods were intended for use with conventional (non-turbo) engines and maynot provide a sufficient clearnace between the throttle linkage and the hood undersides. As a result, under certain conditions, the throttle linkage may come in contact with the hood potentially causing damage to the linkage and preventing the throttle from returning to its idle position.
وزارة النقل الكندية21 أكتوبر 19831983088سنوات الطراز 1983معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Inadequate clearance between the underside of the hood and the throttle linkage could damage the linkage and prevent the throttle from returning to idle position. This condition is due to installation of the incorrect hood style during vehicle assembly.
NHTSA · الولايات المتحدة21 أكتوبر 198383V110000سنوات الطراز 1983معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The housing plates on the driver seat back latch recliner assemblies were manufactured with substandard material products. This tainted steel was used to produce seatback latches for both the right and left side seat assemblies. Under certain conditions, the defective housing plates may distort, allowing the locking teeth to disengage and tear off. This permits the seatback to pivot backwards.
NHTSA · الولايات المتحدة8 سبتمبر 198181V102000سنوات الطراز 1981معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Vehicles produced at dearborn assembly plant. Vehicles may have been equipped with driver seat back latch recliner assemblies that contain housing plates manufactured from suspect steel material. Under certain types of driver induced seat loading the recliner mechanism housing plates might distort allowing the locking teeth to disengage. This would allow the seat back to rotate rearward into a reclined position.
وزارة النقل الكندية4 سبتمبر 19811981092سنوات الطراز 1981معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Vehicles equipped with turbocharged 2.3l engines and manual transmissions. Vehicles may have been built without a particular electric curcuit in the idle tracking system wiring harness. This condition may cause exhaust emissions of hydrocarbon (hc) and carbon monoxide (co) gases to exceed the limits specified by canada motor vehicle safety standard 1103 - exhaust emissions.
وزارة النقل الكندية7 مايو 19801980073سنوات الطراز 1980معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
During the railcar chain-down operation or during in-transit railcar movement, the chain could interfere with and break the evaporative emission carbon canister. These vehicles would then not comply with canada motor vehicle safety standard 1105 - evaporative emissions.
وزارة النقل الكندية6 نوفمبر 19791979182سنوات الطراز 1980معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
ملاحظة: تنطبق على المركبات المزودة بمحركات سعة 3.8 لتر. قد لا تتوافق هذه المركبات مع المعيار C.M.V.S.S. 1103 الخاص بانبعاثات العادم. قد تهتز المادة الأساسية في المحولات الحفازة وتتفتت أثناء الاستخدام العادي، مما يتسبب في تجاوز انبعاثات العادم للحد المسموح به. التصحيح: سيتم فحص المركبات، وسيتم استبدال المحول الحفاز عند الضرورة.
وزارة النقل الكندية21 أغسطس 19921992098سنوات الطراز 1986ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
بعض سيارات Mustang 2.3 لتر موديل 1987-89، وسيارات Mustang وCapri 5.0 لتر HO موديل 1986، وسيارات Mustang وMark VII 5.0 لتر HO موديل 1987-89. قد لا تتوافق هذه المركبات مع المعيار C.M.V.S.S. 1103 - انبعاثات العادم. قد تُصدر الركيزة الموجودة في المحول الحفاز صوت طقطقة وتتفتت أثناء الاستخدام العادي، مما يتسبب في تجاوز انبعاثات العادم للحد المسموح به. التصحيح: سيتم استبدال المحول الحفاز عند الضرورة.
وزارة النقل الكندية20 أغسطس 19921992097سنوات الطراز 1986ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).