En raison d’une erreur dans le processus de pliage du coussin gonflable du conducteur, le bouclier thermique peut ne pas se déplacer complètement autour du gonfleur lorsque l’airbag est activé. par conséquent, le gaz chaud peut directement entrer en contact avec le panneau avant de l’airbag, causant des dommages de brûlure au matériau du sac. en conséquence, l’airbag peut se déchirer pendant l’inflation réduisant sa fonction protectrice.
Safety Gate · الاتحاد الأوروبي · RappelConso · فرنسا26 مارس 2021a12/00391/21سنوات الطراز 2019معروض باللغة الأصلية (الفرنسية) · الترجمة قيد الانتظارعرض التفاصيل →
In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. The holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. The high temperature gas/airbag material may contact the drivers skin. The deployment performance of the driver airbag is not affected.
DVSA · المملكة المتحدة25 فبراير 2013R/2013/019سنوات الطراز 2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on the surface of the airbag. The holes are caused by high temperature gas from the airbag inflator exhausting directly onto the surface of the airbag material. Contact of the high temperature gas / airbag material with the driver’s skin can cause burns.
Safety Gate · الاتحاد الأوروبي20 فبراير 2013A12/0243/13سنوات الطراز 2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.
Safety Gate · الاتحاد الأوروبي12 أكتوبر 2021A12/01430/21سنوات الطراز 2019–2020معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly. As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant. Correction: Dealers will replace the rear seat latch strikers with updated versions.
وزارة النقل الكندية12 يوليو 20122012211سنوات الطراز 2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Nissan is recalling certain model year 2012 juke vehicles manufactured from february 3, 2012, through may 26, 2012. Due to an incomplete weld penetration, the rear seat back striker may partially separate in a crash.
NHTSA · الولايات المتحدة12 يوليو 201212V328000سنوات الطراز 2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).