En raison d’une erreur dans le processus de pliage du coussin gonflable du conducteur, le bouclier thermique peut ne pas se déplacer complètement autour du gonfleur lorsque l’airbag est activé. par conséquent, le gaz chaud peut directement entrer en contact avec le panneau avant de l’airbag, causant des dommages de brûlure au matériau du sac. en conséquence, l’airbag peut se déchirer pendant l’inflation réduisant sa fonction protectrice.
Safety Gate · الاتحاد الأوروبي · RappelConso · فرنسا26 مارس 2021a12/00391/21سنوات الطراز 2019معروض باللغة الأصلية (الفرنسية) · الترجمة قيد الانتظارعرض التفاصيل →
An internal ignition switch may be defective. As a consequence, the engine could unexpectedly stall while driving and under certain conditions the vehicle's airbag system may not function.
Safety Gate · الاتحاد الأوروبي29 أغسطس 2018A12/1281/18سنوات الطراز 2017معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
On certain vehicles, the fuel pressure sensor may not have been tightened properly when the corrective measure of recall 2012-074 was performed. As a result, the fuel pressure sensor may loosen over time, which could cause a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will inspect and retighten the fuel pressure sensor as necessary.
وزارة النقل الكندية8 مارس 20182018121سنوات الطراز 2011–2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Nissan North America, Inc. (Nissan) is recalling certain 2011-2012 Nissan Juke vehicles previously remedied under recall 12V-069. During that recall remedy, the fuel pressure sensor may not have been properly tightened, potentially causing the sensor to loosen and leak fuel.
NHTSA · الولايات المتحدة7 مارس 201818V156000سنوات الطراز 2011–2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
On certain vehicles, due to a manufacturing defect the start/stop button could stick inside of its housing. If this occurs, vibration could cause the electrical components inside the button to contact repeatedly in quick succession and initiate the emergency engine shut off procedure while the vehicle is in motion. This could result in increased steering and braking effort, a loss of motive power and would disable the supplemental restraint systems (SRS), increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and repair defective start/stop switch as necessary.
وزارة النقل الكندية25 يونيو 20152015282سنوات الطراز 2013–2014معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
null The fuel rail pressure sensor of some vehicles may be tightened insufficiently to the fuel rail of the engine and it may loosen gradually due to heat and vibration of the engine. If left undetected and the vehicle continues to be driven in this condition, in an extreme case, fuel leakage may occur between the fuel rail pressure sensor and the fuel rail.
Safety Gate · الاتحاد الأوروبي5 ديسمبر 2014A12/1975/14سنوات الطراز 2012–2014معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and the rail. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect the pressure sensor and tighten to specification. Note: This is an expansion of recall 2012-074. Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.
وزارة النقل الكندية28 نوفمبر 20142014539سنوات الطراز 2011–2014معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak.
NHTSA · الولايات المتحدة28 نوفمبر 201414V683000سنوات الطراز 2012–2014معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. The holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. The high temperature gas/airbag material may contact the drivers skin. The deployment performance of the driver airbag is not affected.
DVSA · المملكة المتحدة25 فبراير 2013R/2013/019سنوات الطراز 2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on the surface of the airbag. The holes are caused by high temperature gas from the airbag inflator exhausting directly onto the surface of the airbag material. Contact of the high temperature gas / airbag material with the driver’s skin can cause burns.
Safety Gate · الاتحاد الأوروبي20 فبراير 2013A12/0243/13سنوات الطراز 2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Nissan has identified that the fuel rail pressure sensor of some vehicles may have not been correctly tightened to the fuel rail of the engine and may loosen gradually due to heat and vibration of the engine. If left undetected and the vehicle continues to be driven in this condition in extreme cases fuel leakage may occur.
DVSA · المملكة المتحدة3 أبريل 2012R/2012/024سنوات الطراز 2010–2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Nissan is recalling certain model year 2011-2012 juke, infiniti qx and infiniti m vehicles. The fuel pressure sensors may not have been tightened to the correct specification. As a result, the fuel pressure sensor may loosen due to heat and vibration causing fuel to leak.
NHTSA · الولايات المتحدة24 فبراير 201212V069000سنوات الطراز 2011–2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and rail. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect for fuel leakage from the pressure sensor and the fuel rail. If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications. If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery rail will be replaced, and the sensor will be tightened.
وزارة النقل الكندية23 فبراير 20122012074سنوات الطراز 2011–2012معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
في المركبات المتأثرة، قد لا يتطابق رقم الهيكل (VIN) المخزن في نظام المركبة مع رقم الهيكل الفعلي للمركبة. قد يؤدي ذلك إلى موقف يتمكن فيه مستخدم المركبة من رؤية معلومات تتعلق بمركبة أخرى، مما ينتج عنه خرق لأمن البيانات.
DVSA · المملكة المتحدة17 يونيو 2024R/2024/234سنوات الطراز 2019–2023ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
ب بسبب تغيير في التصميم أدى إلى إدخال شطبة داخلية في زر القفل الخلفي للمقعد الخلفي، قد تعلق ساق تشغيل القفل بهذه الشطبة، فتمنع حركتها إلى الأعلى. ونتيجة لذلك، قد لا يكون ظهر المقعد الخلفي مقفلاً بإحكام عند إعادته إلى وضعه العمودي بعد طيه، وقد لا يكون الراكب في المقعد الخلفي وجميع الأمتعة المخزنة في حجرة الأمتعة مثبتة بشكل صحيح في حال وقوع حادث، مما يزيد من خطر الإصابة.
Safety Gate · الاتحاد الأوروبي · RappelConso · فرنسا8 أغسطس 2023a12/01430/21سنوات الطراز 2019–2020ترجمة آلية · اللغة الأصلية: الفرنسيةعرض التفاصيل →
A potential concern affecting the HEVC (Hybrid Electric Vehicle Control) module software has been identified which may cause a module reset of affected vehicles. Simultaneous pressing of brake and accelerator could cause engine stumble or stall.
DVSA · المملكة المتحدة19 أبريل 2023R/2023/096سنوات الطراز 2022معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Si l’accélérateur et les pédales de frein sont pressés simultanément, cela provoque une réinitialisation de la commande de véhicule électrique hybride (hevc). cela peut conduire à ce que le moteur trébuche ou décroche dans des conditions de conduite spécifiques (lorsque le moteur est froid, immédiatement après le démarrage), ce qui crée un risque d’accident.
Safety Gate · الاتحاد الأوروبي · RappelConso · فرنسا14 أبريل 2023a12/00724/23سنوات الطراز 2022معروض باللغة الأصلية (الفرنسية) · الترجمة قيد الانتظارعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).