Shoulder harness problem (US safety investigation)
NHTSA, the US road safety agency, received a defect petition (DP85001) about this problem on 21 September 1984 for 1983 models; it was closed on 2 January 1985 without a recall.
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Toyota كامري 2001 V10
يجمع هذا الملف الأعطال المعروفة لـToyota كامري 2001 V10، التي كتبها المجتمع ووثّقها بالمصادر. القراءة مجانية، والحساب المجاني يتيح المساهمة. يحصل العطل على الختم عندما يعتمده عدد كافٍ من المساهمين الموثوقين.
NHTSA, the US road safety agency, received a defect petition (DP85001) about this problem on 21 September 1984 for 1983 models; it was closed on 2 January 1985 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE87057) into this problem on 10 September 1987 for 1983–1986 models; it was closed on 30 March 1988 without a recall.
16 owners in the United States reported problems with the seat belts of this car to NHTSA (model years 1983–1986). Most often named: front:buckle assembly (88%). Reported consequences: 1 injury.
توقف حاسوب التحكم في السرعة (كروز كونترول) عن العمل قد يحدث عند إيقاف تشغيل المفتاح بعد الاستخدام المتواصل، يليه درجات حرارة محيطة منخفضة.
ينظم منظم الجهد الذي يتحكم في مقدار التدفق في النظام الكهربائي بين البطارية والمولد، وقد تكون به أخطاء تصنيع في الدائرة المتكاملة. قد يؤدي المنظم إلى شحن البطارية بشكل زائد.
Toyota Genuine Oil Seal Side Lip Grease is used when installing/removing the drive shaft to prevent: ? The intrusion of water, dust, etc. ? Improvement of sealing performance ? Reduction of sliding resistance
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle
TSB: قسم مبيعات الملحقات والتسويق في TMNA طوّر ملصقًا خاصًا بفيلم حماية الطلاء في تويوتا (PPF) (معالجًا بمادة لاصقة خفيفة مطورة خصيصًا) لمركبات تويوتا لموديل عام 2021. يتوفر الملصق بمقاسين (2.8 بوصة × 8 بوصات و4 بوصات × 8 بوصات) للأغطية الصغيرة والكبيرة، وسيُثبَّت على الجزء العلوي من فيلم PPF لجميع السلاسل في مرافق تركيب الملحقات في TLS. الملصق مصمم ليبقى ملتصقًا بالفيلم حتى التسليم النهائي/الغسيل. قبل تسليم المركبة للعميل مباشرة، اتبع إجراء الإزالة الوارد في هذه النشرة لإزالة الملصق وأي بقايا يتركها المادّة اللاصقة.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).