Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Electrical switch replacement guidelines. Customer statement/workshop findings: Electrical switch suspected as defective This TPI is not applicable to suspected faulty control units or any component related to the passive restraint system in particular the airbag system Technical background: Prior to replacing an electrical switch refer to the Measure section of this TPI
Front seatbelt - Diagnostic Trouble Codes - B130474 and/or B130574. Customer statement / workshop findings Diagnostic Trouble Codes (DTCs) evident in Address: 0015 System name: 15 - Airbag Control Module B130474: Left front seat belt tensioner control module Actuator deviated B130574: Right front seat belt tensioner control module Actuator deviated The DTCs can be evident if the occupant uses a dummy seat belt buckle, the occupant may use the dummy seat belt buckle to prevent a warning light or audible warnings Technical background Dummy seat belt buckles of any description MUST NOT be used under any circumstances, Figure 1 shows an example of a dummy seat belt buckle
Electrical switch replacement guidelines Customer statement / workshop findings: Electrical switch suspected as defective This TPI is not applicable to suspected faulty control units or any component related to the passive restraint system in particular the airbag system Technical background: Prior to replacing an electrical switch refer to the Measure section of this TPI
New Cont GT & GTC V8 - Start-Stop System Inhibit - Driver's Seat Belt Start/Stop system inhibit - Drivers seatbelt unfastened. Customer statement / workshop findings: The Start/Stop system functions with the drivers seat belt not fastened although the Owners handbook states that the drivers seat belt must be fastened for the Start/Stop system to function. Technical background On all 202 0model year vehicles specified with a V8 engine, the Start/Stop system will function with the drivers seat belt not fastened although the Owners handbook states the drivers seat belt must be fastened for the Start/Stop system to work, the system in this scenario is functioning correctly. Due to a change to one of the system inhibits, the 2021 model year Owners handbooks will be updated to confirm the Start/Stop system will work with the seat belt unfastened.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).