Kraftfahrzeuge – Karosserie (Schutzausrüstung für Insassen)
Der Airbag-Gasgenerator des Fahrers kann aufgrund des Alterns möglicherweise unkontrolliert explodieren, wenn er durch eine Kollision ausgelöst wird.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu BMW F26 (alle generationen) erhalten
Der Airbag-Gasgenerator des Fahrers kann aufgrund des Alterns möglicherweise unkontrolliert explodieren, wenn er durch eine Kollision ausgelöst wird.
Der Gasgenerator im Fahrerairbag kann bersten.
Betroffene Fahrzeuge sind in den Märkten, in denen sie zuvor zugelassen waren, bereits in Sicherheitsrückrufen erfasst. Die Fahrzeuge können mit einem Fahrer- und/oder Beifahrerairbag ausgestattet sein, der bei Auslösung mit übermäßiger Kraft auslösen kann, wodurch scharfkantige Metallsplitter freigesetzt werden. Dies kann zu schweren Verletzungen führen, die für Personen in der Umgebung tödlich sein können.
Möglicherweise wurde später ein anderes Lenkrad mit Airbag montiert, bei dem das Gas im Gasgenerator altern kann.
Eine Naht am Gehäuse des Gasgenerators des Fahrerairbags wurde möglicherweise nicht ordnungsgemäß verschweißt. Bei einem Unfall kann der Gasgenerator beim Auslösen des Airbags bersten und dabei Metallteile freisetzen, die Verletzungen verursachen können.
De buitenste hoofdsteunen op de achterbank zijn mogelijk niet correct vervaardigd.
Affected vehicles may have had a retrofit or conversion of the airbag using a previously recalled airbag variant which if deployed may do so with excessive force causing sharp metal fragments to be released this may cause serious injury possibly fatal to people in the vicinity. The original factory fitment airbag for the vehicle is not affected.
Le propergol dans l'airbag du conducteur peut se détériorer avec le temps. si les airbags se déploient, cela pourrait entraîner des fragments du gonfleur blessant les occupants du véhicule.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries.
Er is mogelijk naderhand een ander stuurwiel gemonteerd met een airbag waarvan het gas in de gasgenerator kan verouderen.
L’airbag peut se détériorer au fil du temps et, s’il est déployé, une pression interne excessive peut provoquer l’éclatement du corps du gonfleur et des fragments de métal pourraient traverser le matériau du coussin causant des blessures aux occupants.
BMW of North America, LLC (BMW) is recalling certain 2014 X3 xDrive28i, X3 xDrive35i, X5 sDrive35i, X5 xDrive35i, and 2015 X4 xDrive35i vehicles. The driver's air bag inflator may explode during deployment, due to a manufacturing defect.
De gasgenerator van de bestuurdersairbag kan bij activering door een aanrijding mogelijk ongecontroleerd tot ontploffing komen als gevolg van veroudering.
A possible degradation of airbag propellant tablets could lead to an over-aggressive combustion in the event the airbag is activated which may cause the inflator body to rupture.
La connexion à vis de l’airbag du passager au tableau de bord n’a peut-être pas été fabriquée selon les spécifications. par conséquent, si l’airbag est activé, le couvercle du panneau peut se casser en morceaux, ce qui sera propulsé contre le passager augmentant le risque de blessure.
Issue: On certain vehicles, the seat trim may not be properly attached to the front passenger seat. Over time, this could cause the occupant classification system (OCS) not to work properly. If this happens, the airbag system can turn off the passenger-front airbag even when an adult is sitting in the seat. Safety Risk: In a crash where an airbag is required, an airbag that does not inflate could increase the risk of injury for an adult passenger. Corrective Action: BMW will notify owners by mail and instruct you to make an appointment with a dealer to replace the front passenger seat cushion (including the occupant classification system).
The cable connecting the hall sensor with the seat buckle might be too short.Consequently, the sensor might detach from the buckle, causing a faulty seatbelt lock recognition, impairing the functioning of the restraint system and the deployment of the airbag, increasing the risk of injury in the event of an accident.
The screw connection from the passenger's airbag to the instrument panel may not have been manufactured according to specifications.As a result, if the airbag is activated, the panel cover may break into pieces, which will be propelled against the passenger increasing the risk of injury.
Issue: On certain vehicles, there may be a problem with the front seat belt buckle sensors. This could cause the seat belt warnings to turn on, even if the front seat belts are buckled. If the driver ignores these warnings, the seat belt pretensioner and airbag systems may not function properly. Safety Risk: A seat belt pretensioner or airbag system that does not work properly in a crash could increase the risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to check the front seat belt buckles and replace them, if necessary.
BMW of North America, LLC (BMW) is recalling certain 2019-2020 X4 xDrive30i and X4 M40i, and 2018-2020 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X3M vehicles. The instrument panel casing may not have been tightened properly to the passenger air bag.
The airbag cover on the instrument panel may not have been manufactured according to specifications. As a result, in the event of an accident, the airbag may not deploy as designed, increasing the risk of an injury.
Issue: On certain vehicles, the instrument trim panel could cause the passenger-front airbag not to deploy properly in a crash. Safety Risk: A passenger-front airbag that does not work properly could cause increased injuries in a crash. Corrective Actions: BMW dealers will replace the instrument trim panel prior to vehicle sale.
BMW of North America, LLC (BMW) is recalling certain 2019 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X4 M40i vehicles. The instrument panel assembly may have been improperly manufactured, possibly affecting the deployment of the passenger's frontal air bag.
運転席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の吸湿防止が不適切であった場合、高い湿度の環境下で大きな温度変化を繰り返すと、ガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレータ容器が破損するおそれがある。
運転席用または助手席用のエアバッグのインフレータ(膨張装置)において、ガス発生剤の吸湿防止が不適切であった場合、高い湿度の環境下で大きな温度変化を繰り返すと、ガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレータ容器が破損するおそれがある。
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).