Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

BMW X6

2007– · 3 generationen · 11 dokumentierte Mängel · 6 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
X6 III · 2019–
BulletinMittelSonstigesNA

Bulletin

Water leaks onto the carpet from the heating and air conditioning (HVAC) system after the vehicle has hadprior HVAC system repairs.

NHTSA · Herstellerbulletin11039090Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelSonstigesNA

Bulletin

Die Zylinderkopfabdeckung wurde im Montagewerk nicht korrekt eingebaut.

NHTSA · Herstellerbulletin11038936Modelljahre 2027Automatisch übersetzt · Original: EnglischDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might belower than when handed over to the workshop for the repair.

NHTSA · Herstellerbulletin11036380Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelElektrikNA

Bulletin

Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.

NHTSA · Herstellerbulletin11034449Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · Herstellerbulletin11031574Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

It was determined that your vehicle was fitted with a brake booster that potentially has a faulty hydraulic valve. This may result in a modified pedal feel and a sporadic red Check Control message. The brake booster should be replaced.

NHTSA · Herstellerbulletin11030319Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelSonstigesNA

Bulletin

Various external influences can cause premature aging of the tension strut hydro-mount elastomer; which can lead to cracks in the material, and leakage.

NHTSA · Herstellerbulletin11029047Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelGetriebeNA

Bulletin

The right rear drive shaft may not have been manufactured correctly during production and may break. In the event of a fault, you will hear significant noises in the area of the rear axle and the driving performance will be noticeably reduced. At the same time, warning lights and Check Control messages will be shown on the Central Display.

NHTSA · Herstellerbulletin11028294Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

The wheel bearing and the brake disc are not correctly aligned; are not concentric (circled). When applicable work is being performed, it is therefore difficult to remove the wheel bolts from, or fasten them into the wheel bearing hub.

NHTSA · Herstellerbulletin11025672Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

Beim Lenken im Stand oder bei der Fahrt auf unebenen Straßen können knackende, knarrende oder klopfende Geräusche zu hören sein.

NHTSA · Herstellerbulletin11021817Modelljahre 2024Automatisch übersetzt · Original: EnglischDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

The seat lumbar system Massage will not function if the module needs to be initialized. This can occur toeither the drivers and/or passenger side seat. Here is a list of possible faults: Seat pneumatics module front right SPNM _ VR 025908 - SPNMVR: Control unit is not coded 02590B - SPNMVR: Control unit is not encoded for the vehicle 806927 - SPNMVR: Installation location not taught in Seat pneumatics module front left SPNM _ VL 025308 - SPNMVL: Control unit is not coded 02530B - SPNMVL: Control unit is not encoded for the vehicle 8067A7 - SPNMVL: Installation location not taught in Seat Module Driver FAS SMFA 80301E - No seat adjustment because of engine start conditions Seat Module Passenger BFS SMBF 802C1E - No seat adjustment because of engine start conditions Seat Module Drivers Side Rear FAH SMFAH 802E1E - No seat adjustment because of engine start conditions Seat Module Passenger Side Rear BFH SMBFH 802A1E - No seat adjustment because of engine start conditions

NHTSA · Herstellerbulletin11020931Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

After programming from the I-Levels between 24-03-505 and lower than 24-03-540 to I-Level 24-11-530 or higher, the following CCM may be displayed: CCM-2525: Brake system. Drive at moderate speed

NHTSA · Herstellerbulletin11020910Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

The air line on the air suspension supply system may not be properly installed. In the event of a fault, residual pressure is maintained in the struts and corresponding check control message.

NHTSA · Herstellerbulletin11019565Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

The air line on the air suspension supply system may not be properly installed. In the event of a fault, residual pressure is maintained in the struts and corresponding check control message.

NHTSA · Herstellerbulletin11018563Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

Bremsgeräusche in Form von Knarren oder Stöhnen am Hinterachsbereich bei niedriger Geschwindigkeit, also nahe dem Stillstand, beim Anfahren und Anhalten im Stop-and-go-Verkehr sowie beim Einparken oder Rangieren.

NHTSA · Herstellerbulletin11018518Modelljahre 2024Automatisch übersetzt · Original: EnglischDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might be lower than when handed over to the workshop for the repair.

NHTSA · Herstellerbulletin11013438Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelElektrikNA

Bulletin

BMW AG has decided on a service campaign for certain vehicles from the G0x, G12 and G20 series. Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according to the vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehicles enter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, the power of the starter motor decreases. As a result, the engine does not start.

NHTSA · Herstellerbulletin11013434Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might be lower than when handed over to the workshop for the repair.

NHTSA · Herstellerbulletin11013040Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelBremsenNA

Bulletin

Improved diagnostic software for the brake system.

NHTSA · Herstellerbulletin11008992Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelElektrikNA

Bulletin

Due to an installation error, the crankshaft sensor connector may not have been properly locked. In very rare cases, the plug connection may become disconnected. If no signal is sent by the crankshaftsensor, the engine will switch to emergency operation and a Check Control message will occur.

NHTSA · Herstellerbulletin11008104Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelElektrikNA

Bulletin

There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.

NHTSA · Herstellerbulletin11006766Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelElektrikNA

Bulletin

Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according tothe vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehiclesenter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, thepower of the starter motor decreases. As a result, the engine does not start.

NHTSA · Herstellerbulletin11006719Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelElektrikNA

Bulletin

There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.

NHTSA · Herstellerbulletin11002858Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

Incorrect adjustment of the front and rear axles may result in steering wheel drift or increased tire wear onthe vehicle.

NHTSA · Herstellerbulletin11000635Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
X6 III · 2019–
BulletinMittelFahrwerkNA

Bulletin

At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned.

NHTSA · Herstellerbulletin11000563Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).