Bulletin
Service Update for Inventory and Customer Vehicles Transfer Fluid Leak Expires with Base Warranty
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Cadillac SRX (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Service Update for Inventory and Customer Vehicles Transfer Fluid Leak Expires with Base Warranty
Service Update for Inventory and Customer Vehicles Transmission Fuid Leak Expired with Base Warranty. Equipped with 6-Speed Automatic Transmission (6T70)
Steering Wheel Radio Controls Erratic Operation Condition/Concern Some customers may comment that when changing radio presets up on the steering wheel controls, then adjusting the volume down/up, then proceeding to change the radio presets up, the next preset actually goes down. This only occurs when making a volume change in between changing radio presets. This may be caused by a software anomaly. Recommendation/Instructions An updated software calibration has been released to address the above conditions.
Kein Durchdrehen/kein Start, leere Batterie aufgrund von Ruhestromverbrauch/Entladung.
18029 - Special Coverage. Certain vehicles listed above, may have an inoperative purge solenoid that could lead to excessive fuel vapors entering the combustion chamber from the fuel tank. This condition could result in no start, idle stall, and possible drivability issues such as hesitation. The driver may see a check engine light, and may notice a ticking noise, and variation in idle speed. The driver may experience this condition most immediately after filling up the vehicle with gas or while coming to a stop. This special coverage covers the condition described above for a period of 10 years or 120,000 miles (193,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. Dealers are to inspect for a leak in the solenoid assembly and replace if necessary. The repairs will be made at no charge to the customer.
This technical bulletin provides a procedure to replace the crankshaft bearings and rear oil seal to correct the customers concer of an oil leak.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
This preliminary informational bulletin provides information on removing the heated seat fuse and reinstalling it to fix a condition causing the heated seats to become inoperative
This preliminary bulletin provies a procedure to reprogram the instrument cluster to correct the customers concern of the steering wheel radios controls erractic operation.
This technical bulletin provides repair information for replacing the steering wheel airbag to correct a customer concern that the steering wheel airbag is not flush to the steering wheel and/or it is difficult to depress airbag to engage the horn.
This technical bulletin provides repair information to correct a customer concern of a spongy brake pedal and/or excessive brake pedal travel.
This Preliminary Information communication provides information to the technician about vehicles that when streaming MP3 song files through a Bluetooth paired phone the song advances to next selection when the seek up button on right hand steering wheel control is pressed but when the seek button is held down for fast forward and then released, the music will continue to fast forward. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
This preliminary informational bulletin provides information on Inoperative Heated Steering Wheel Operation after Replacing Steering Wheel due to the illumnation dimming circuit that is required with steering wheel replacement.
This preliminary informational bulletin provieds a procedure for installing multiple coax cables to correct the condition of a poor AM radio reception or static noise heard.
This Preliminary Information communication provides information to the technician about vehicles that have a no start or multiple messages on the Driver Information Center during cold weather. Technician will need to check the Vehicle Communication Interface Module label for Assembled in China. If the date is between 7/18/2014 and 8/3/2014, record the Station Identifier from the label and call General Motors Technical Assistance Center referencing this Preliminary Information for further assistance.
This Preliminary Information communication provides information to the technician about vehicles that when streaming MP3 song files through a Bluetooth paired phone, that when the seek up button on right hand steering wheel control is pressed the song advances to next selection, but when the seek button is held down for fast forward and then released, the music will continue to fast forward. Technician will need to Service Programming System the Instrument Panel Cluster.
13369 - Service Update. Install new software into the rear seat entertainment system, if necessary. The software in some of these vehicles may not enable the operator to resume playback of the DVD/CD system after the vehicle is turned off. With this condition, the DVD/CD system will only be able to start at the beginning of the disc. In addition, a black screen may appear on the rear DVD screens for up to 7 minutes after a short ignition cycle.
13120B - Service Update (population added; expiration date extended). Reprogram the transmission control module (TCM). The torque converter clutch solenoid in the TECHM can stick due to debris in the transmission. When the vehicle is at the end of a coast-down, as the vehicle is coming to a stop, a stuck solenoid will fail to release the torque converter clutch. This keeps the engine directly connected to the driven wheels. As the vehicle stops, the engine speed will be pulled down below normal idle speed and the engine may stall. The vehicle can be immediately restarted and driven. The reprogramming will install a revised calibration to correct this condition.
13147 - Service Update - Rotate the tires. These vehicles may experience loosening of the wheel nuts. If this occurs, a creaking, rattling or grinding noise may originate from the wheel area. A steering vibration may also be present. If unnoticed or ignored, one or more of the wheel lug nuts could detach, or fatigue. The wheel attachment studs may fracture the studs.
13077A - Service Update (revised warranty information). The torque converter housing may have a casting defect on the sealing flange that could prevent the molded rubber carrier gasket from fully seating on the flange. If the gasket is not fully seated, over time, a transmission fluid leak could develop. Dealers are to inspect the date and mold code on the transmission housing. If specific date and mold codes are found, the transmissions will require replacement.
13120 - Service Update. The torque converter clutch solenoid in the TECHM can stick due to debris in the transmission. When the vehicle is at the end of a coast-down, as the vehicle is coming to a stop, a stuck solenoid will fail to release the torque converter clutch. This keeps the engine directly connected to the driven wheels. As the vehicle stops, the engine speed will be pulled down below normal idle speed and the engine may stall. The vehicle can be immediately restarted and driven. Dealers are to reprogram the transmission control module with a revised calibration to correct this condition.
13120A - Service Update (revised population). The torque converter clutch solenoid in the TECHM can stick due to debris in the transmission. When the vehicle is at the end of a coast-down, as the vehicle is coming to a stop, a stuck solenoid will fail to release the torque converter clutch. This keeps the engine directly connected to the driven wheels. As the vehicle stops, the engine speed will be pulled down below normal idle speed and the engine may stall. The vehicle can be immediately restarted and driven. Dealers are to reprogram the transmission control module with a revised calibration to correct this condition.
13077 - Service Update. The torque converter housing may have a casting defect on the sealing flange that could prevent the molded rubber carrier gasket from fully seating on the flange. If the gasket is not fully seated, over time, a transmission fluid leak could develop. Dealers are to inspect the date and mold code on the transmission housing, and if specific date and mold codes are found, the transmissions will be replaced.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
This preliminary informational bulletin provides information on removing the heated seat fuse and reinstalling it to fix a condition causing the heated seats to become inoperative
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).