Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Dieser Servicebulletin enthält Informationen für Techniker zur Verwendung eines Customer Concern Verification-Formulars, um die vom Kunden zu beantwortenden Fragen zu Problemen mit der automatischen Notbremsfunktion (Automatic Emergency Braking, AEB) strukturiert zu erfassen.
Special Coverage. Certain 2019 model year Buick Enclave and Chevrolet Traverse vehicles equipped with a 3.6L engine (RPO LFY), and certain 2020 model year Buick Encore and Chevrolet Sonic / Trax vehicles equipped with a 1.4L engine (RPO LUV), may have a condition that could cause the evaporative emissions purge valve to not fully close. If this condition occurs, the engine could run rough, hesitate, or stall at idle speeds. Additionally, the Malfunction Indicator Light (Check Engine Light) would illuminate, and a diagnostic trouble code would be set. Dealers are to replace the evaporative emissions purge valve as necessary. The repairs will be made at no charge to the customer.
Normal Characteristic Push to Talk Button on Steering Wheel Control is Inoperative Condition Some customers may comment on one of the following conditions: 1. The push to talk button on the steering wheel control is inoperative when there is no phone device is paired with the vehicle. Note: The push to talk button, however, still answer OnStar hands-free calls (if equipped). 2. Cannot delete USB names from the radio display. The Radio displays the names of USB drives that were previously installed and have been removed. Cause This condition may be due to one of the following: Condition 1, no action is required. It is normal operation if you do not have a phone device paired with the vehicle via Bluetooth. Condition 2, the radio displays the last 3 sources used for the radio like AM, FM, XM, Bluetooth device streaming music or USB drive. The sources are highlighted/actively listed even after the source is removed from the system. To delete the name of the USB from the radio display, push the more button on the display and select another radio sources like AM, FM or XM. Note: The radio will show the last 3 audio sources after removed, as shown in the illustration above Correction DO NOT replace the radio assembly as this is a normal design characteristic for the infotainment system.
Service Update. Certain vehicles may have a torque converter housing hole drilled too deep. Dealer to insert an adhesive coated bolt to prevent external leaks.
This technical bulletin provides repair information to correct a customer concern of finding a water leak in the trunk, rear compartment floor panel trim wet.
The informational bulletin explains how items on the passenger seat may cause the PPS to chime or the passenger airbag light turns on if electronic devices or conductive objects are placed on the seat.
The informational bulletin explains how items on the passenger seat may cause the PPS to chime or the passenger airbag light turns on if electronic devices or conductive objects are placed on the seat.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat, DTCs 5045 or B0074 0F May Set in PPS Module
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
12273 - Service Update. An incorrect calibration may cause the setting of DTC P16F3 and limit engine power to approximately 5 mph (8 km/h) after an engine stall. Upon the next ignition, the code will clear and engine power will be restored to normal. Dealers are to reprogram the engine control module (ECM)
This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
The informational bulletin explains how items on the passenger seat may cause the PPS to chime or the passenger airbag light turns on if electronic devices or conductive objects are placed on the seat.
This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
This informational bulletin provides information for the customer to pair their phone in order for the push to talk button on the steering wheel control to work.
This preliminary bulletin provides information on if the BCM has been reprogrammed, the trunk button needs to be pressed for 1 sec unless a two shot relay was installed, then the button must be pressed twice at 1 sec intervals.
This informational bulletin provides information for the customer to pair their phone in order for the push to talk button on the steering wheel control to work.
This preliminary informational bulletin provides repair information to correct a customer concern of hesitation and/or stall at high ambient temperatures.
17139 - Service Update. Certain vehicles may have delamination on the electronic control module (ECM) printed circuit board (PCB) causing open circuits. This condition may result in possible no start or stall. Dealers are to replace and reprogram the ECM.
This preliminary informational bulletin provides a procedure to replace both the front brake caliper brackets for a condition of a rattle or clunk noise from the front end of the vehicle.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).