Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Citroën C1

2005–2022 · 2 generationen · 13 dokumentierte Mängel · 2 Märkte
Generationen
Modelljahr
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014
RückrufKritischMotorUK

Possibility of fuel leak

It has been identified that during the fuel tank production process the joint between the tank and the fuel supply pipe assembly may not have been produced to the correct standard. Should this indeed be the case leakage from the supply pipe area of the fuel tank might occur.

DVSA · Vereinigtes Königreich7. Nov. 2007R/2007/165Modelljahre 2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 II (AB40) · 2014–2022
RückrufMittelInnenraumEU

La couture des boucles arrière de la ceinture de sécurité pourrait être défectueuse

La couture des boucles arrière de la ceinture de sécurité pourrait être défectueuse. cela affectera la fonction de protection de la ceinture de sécurité, ce qui augmentera le risque de blessure en cas d’accident.

Safety Gate · EU · RappelConso · Frankreich19. Aug. 2021a12/00103/21Modelljahre 2020Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RückrufMittelFahrwerkJP

かじ取ギヤボックス

ステアリングコラムシャフトとステアリングギアボックスを接続するボルトの取付けが不適切なため、当該取付部の結合力が不足しているものがある。そのため、かじ取り操作等により当該取付部が分離して、最悪の場合、かじ取り操作ができなくなるおそれがある。

MLIT · Japan11. Jan. 20191227720Modelljahre 2018Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RückrufMittelFahrwerkUK

Steering column may fail unexpectedly

A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.

DVSA · Vereinigtes Königreich27. Juni 2016R/2016/136Modelljahre 2014Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
RückrufMittelKarosserieUK

Bumper may not perform as designed in a collision

Affected vehicles may have a small defect in the front bumper frame. This may affect its impact absorption in the even of a collision.

DVSA · Vereinigtes Königreich30. Jan. 2015R/2015/024Modelljahre 2014Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
RückrufMittelBremsenUK

Loss of control

The front shock absorber rod may have an internal fault which could cause it to brake. This could have an adverse affect on the front suspension and the driver's ability to control the vehicle.

DVSA · Vereinigtes Königreich19. Dez. 2014R/2014/173Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
RückrufMittelFahrwerkUK

Rear cross-member may fail and cause driver to lose control

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

DVSA · Vereinigtes Königreich25. Feb. 2014R/2014/028Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
RückrufMittelMotorUK

Engine may fail

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

DVSA · Vereinigtes Königreich14. Nov. 2012R/2012/129Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
RückrufMittelFahrwerkUK

Suspension may fail

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

DVSA · Vereinigtes Königreich20. Juni 2011R/2011/070Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
RückrufMittelMotorUK

Engine may fail

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

DVSA · Vereinigtes Königreich5. Nov. 2010R/2010/192Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 II (AB40) · 2014–2022
RückrufMittelSonstigesUK

Accelerator pedal may fail to return to idle

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

DVSA · Vereinigtes Königreich19. Feb. 2010R/2010/012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
C1 I (PM/PN) · 2005–2014
RückrufMittelFahrwerkUK

Wheel studs may become loose

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

DVSA · Vereinigtes Königreich28. Juli 2009R/2009/075Modelljahre 2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).