Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings
Vehicle description: Pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Dodge Dakota (alle generationen) erhalten
Vehicle description: Pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
Two fuel tank support strap attaching studs were not adequately tightened, which could cause one or both of the strap(s) to separate, mislocating the fuel tanks or allow complete separation of the fuel tank from the vehicle.
An improperly routed transmission wiring harness may come in contact with the fuel hoses and cause fuel hose abrasion. This could result in fuel leakage with the potential for a vehicle fire. Correction: A tie strap will be installed to secure the transmission wiring away from the fuel hoses.
Steel braided fuel hose routing may allow contact between the hose and transmission wiring harness.
Die Ventildeckeldichtung kann sich verschieben und einen Motorölaustritt an der Dichtung verursachen.
Bei Fahrzeugen mit 2,2-Liter- oder 2,5-Liter-EFI-Motor (ohne Turbolader) kann die Ventildeckeldichtung undicht werden und Öl austreten lassen, wodurch die Gefahr eines Motorraumbrandes entsteht. Korrektur: Die Ventildeckeldichtung wird durch einen überarbeiteten Ventildeckel ersetzt, und anstelle der Dichtung wird RTV-Dichtmasse aufgetragen.
The fuel tank support strap attaching studs may not be adequately tightened. This could result in disengagement of the support strap joint which could in turn cause the fuel tank to drop down. Correction: Fuel tank support strap attaching studs will be tightened to specified torque.
Bestimmte Fahrzeuge entsprechen nicht der CMVSS 1105 – Verdunstungsemissionen. Defekter Aktivkohlebehälter (Kraftstoffdampfbehälter).
Speed control system cables may partially disengage and bind at the carburetor throttle lever attachment.
차동장치의 뒤쪽 피니언 너트가 피니언 너트 나사산에 접착 패치가 없는 상태로 제작되었을 수 있습니다. 이 접착 패치가 없을 경우 뒤쪽 액슬 피니언 너트가 느슨해지거나 뒤쪽 구동 샤프트가 차동장치에서 떨어져 나갈 수 있습니다. 피니언 너트가 느슨할 경우 차동장치로부터 떨어져 나간 구동 샤프트로 인해 엔진의 힘이 바퀴로 젂달되지 않을 수 있습니다. 어느 경우이든 경고 표시 없이 충돌을 유발할 수 있습니다
Note: Vehicles with 3.9 litre engine and automatic transmission. These vehicles do not comply with c.M.V.S.S. 1101 - emission device. Vehicles were built with an incorrect underhood emission information (veci) label. The labels incorrectly identify the vehicle as certified to california standards. Correction: Owners will be supplied with correct labels and installation instructions.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).