Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Door Glass Run Channel Weather Stripping Split Or Torn This bulletin involves inspecting and possibly replacing the door glass channel weatherstripping. The customer may describe one or more of the following:One or more door glass channel weatherstripping has split or torn, at the front door glass and/or rear door glass. Increased wind noise and possible water leaks at the door glass.
Door Glass Run Channel Weather Stripping Split Or Torn This bulletin involves inspecting and possibly replacing the door glass channel weatherstripping. The customer may describe one or more of the following:One or more door glass channel weatherstripping has split or torn, at the front door glass and/or rear door glass. Increased wind noise and possible water leaks at the door glass.
Door Glass Run Channel Weather Stripping Split Or Torn This bulletin involves inspecting and possibly replacing the door glass channel weatherstripping. The customer may describe one or more of the following:One or more door glass channel weatherstripping has split or torn, at the front door glass and/or rear door glass. Increased wind noise and possible water leaks at the door glass.
Kundenzufriedenheitsmitteilung T12 VECI-Etikett
Das Fahrzeugemissions-Kontrollinformations-Etikett (VECI-Etikett) bei etwa 120.000 der oben genannten Fahrzeuge enthält möglicherweise keine Emissionskontrollinformationen. Das VECI-Etikett wird häufig bei der Prüfung und Wartung im Betrieb (Inspection and Maintenance, I/M) verwendet, um die ordnungsgemäße Funktion emissionsrelevanter Bauteile zu überprüfen. Falsche Angaben auf dem VECI-Etikett könnten im Bundesstaat Kalifornien zur Verweigerung der Fahrzeugzulassung führen. Ein neues VECI-Etikett muss installiert werden.
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaftis replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft,it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft-PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
Flash: Powertrain Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM: ? U0140 - Lost Communication With Body Control Module (BCM) (RT Vehicles Only). ? P0456 - Evap System Small Leak. Transmission Enhancements are also included with this software release. These changes include the following: ? Garage shift engagements into D may be harsh at times after shutdowns of 10-30 minute duration. ? 5/6 Upshift timing adjusted to improve top speed performance (markets where speeds in excess of 161 kph (100 mph) are permitted). NOTE: The Transmission Enhancements only apply to vehicles equipped with the 3.6L engine (sales code ERB).
Flash: 2.4L, 3.6L Powertrain System Improvements/Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release: Vehicles equipped with a 2.4L engine (sales code ED3 or ED7). ? U0140 - Lost Communication With Body Control Module. Attempting to clear the DTC may be unsuccessful. ? P0456 - Evap purge system small leak. ? 2-1 downshift improvement. ? Charging system duty cycle enhancement to improve starting performance in low ambient temperatures. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? Enhanced Automatic Oil Change Indicator (EAOCI) system enhancements that force the use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicle duty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message. ? Mode 6 data accuracy enhancement for generic scan tools. Vehicles equipped with a 3.6L engine (sales code ERB). ? U0140 - Lost Communication With Body Control Module. Attempting to clear the DTC may be unsuccessful. ? Enhanced Automatic Oil Change Indicator (EAOCI) system enhancements that force the use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicle duty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message. ? Mode 6 data accuracy enhancement for generic scan tools.
Flash: 3.6L Or 2.4L Diagnostic and System Improvements This bulletin involves updating the Powertrain Control Module (PCM) software. The customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. 2.4L Engine ? P0441 - EVAP Purge System Performance. ? P0443 - EVAP Purge Solenoid Circuit. ? P0456 - EVAP System Small Leak. ? P0116 - Engine Coolant Temperature Sensor Performance. ? P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. ? U0140 - Lost Communication With Body Control Module. ? Improve alternator control at Idle. 3.6L Engine ? Improved shift quality. ? U0140 - Lost Communication With Body Control Module. ? P0300 - Multiple Cylinder Misfire. ? P000A - Bank 1 Camshaft 1 Position Slow Response. ? P000B - Bank 1 Camshaft 2 Position Slow Response.
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: 2.4L Engines (Sales Code ED3 or ED7) P0335 - Crankshaft Position Sensor Circuit. P030X - Cylinder X Misfire Improvements when P0335 (Crankshaft Position Sensor Circuit) is present. P0456 - EVAP System Small Leak. P1607 - PCM Internal Shutdown Timer Slow Rationality. P2610 - PCM Internal Engine Off Timer Performance. 3.6L Engine (Sales Code ERB) P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.
Flash: RE2 RE3 RE4 RE6 RE7 RB4 RB5 RB6 RB4 Radio Enhancements This bulletin involves updating the radio?s software and Navigation if required. A customer may experience, one or more of the following conditions: Radio display screen shows ?Test Mode?. Navigation screen locks up or display will be blank. Navigation feature lockout disable (International Only). Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. Some functionality for Japanese and Korean - keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. Viod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the
Flash: RB4 Radio Enhancements This bulletin involves updating the radio and navigation software, if required. A customer may experience, one or more of the following conditions: Radio display screen shows ?Test Mode?. Navigation screen locks up or display will be blank. Navigation feature lockout disable (International Only). Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. The symbol of the car on the map will move erratic, Jerks, Jumps or Backwards. The indication of the highlighted path may be missing at times. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. Blackberry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more than one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrives.
Flash: Powertrain Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM: **JC Vehicles 3.6L: P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. U0140 - Lost Communication With Body Control Module (BCM). P0456 - Evap System Small Leak.** JC Vehicles 2.4L: P0456 - Evap System Small Leak. JS Vehicles: P0456 - Evap System Small Leak. RT Vehicles: U0140 - Lost Communication With Body Control Module (BCM). P0456 - Evap System Small Leak. The following transmission enhancements are also included in this software update: Garage shift engagements into D may be harsh at times after shutdowns of 10-30 minute duration. 5/6 Upshift timing adjusted to improve top speed performance (markets where speeds in excess of 161 kph (100 mph) are permitted).
Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2.4L Engine **P0335 - Crankshaft Position Sensor Circuit. P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P1607 - PCM Internal Shutdown Timer Rationality - (Powertrain Control Module). P2610 - PCM Internal Engine Off Timer Performance - (Powertrain Control Module). P0456 - EVAP System Small Leak.** P0441 - EVAP Purge System Performance. P0443 - EVAP Purge Solenoid Circuit. P0116 - Engine Coolant Temperature Sensor Performance. P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. U0140 - Lost Communication With Body Control Module (BCM). In addition, the following software enhancement is available: Improved alternator control at idle. 3.6L Engine **P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. P0456 - EVAP System Small Leak.** P0300 - Multiple Cylinder Misfire. P000A - Bank 1 Camshaft 1 Position Slow Response. P000B - Bank 1 Camshaft 2 Position Slow Response. In addition, the following software enhancement is available: Improved shift quality.
RB5 RE2 RB6 RE3 RE6 RE4 RE7 RE9 Radio Enhancements This bulletin involves updating the radio?s software and Navigation if required. A customer may experience, one or more of the following conditions: Add China phone book search. Some functionality for China, Japanese and Korean - keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the map. Does not accept Iraq when commanding ?Set Target Country?. Some pop up message characters is displayed with ?!#?. Traffic programming slow to start.
RB4 Radio Enhancements This bulletin involves updating the radio and navigation software, if required. A customer may experience, one or more of the following conditions: The symbol of the car on the map will move erratic, Jerks, Jumps or Backwards. The indication of the highlighted path may be missing at times. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more than one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the map. Does not accept Iraq when commanding ?Set Target Country?. Some pop up message characters is displayed with ?!#?. Traffic programming slow to start.
Vehicle Emission Certification Information Label ersetzen
Dieses Bulletin betrifft den Austausch des Fahrzeug-Emissionszertifizierungs-Informationsschildes (VECI-Label).
Der Halter wird unter Umständen bei einer Prüfstelle für Inspektion und Wartung (IM-Prüfstelle) abgewiesen oder fällt bei der IM-Prüfung durch, da Emissionsbauteile auf dem VECI-Label fehlen. Der Kunde bemerkt möglicherweise, dass einige Angaben auf seinen VECI-Labels fehlen. Wenn in diesem Bereich Informationen angezeigt werden, ersetzen Sie das Label nicht.
Alle Fahrzeuge wurden mit den korrekt verbauten Emissionsbauteilen gefertigt, und es gibt keine Auswirkungen auf die Emissionsleistung oder das Fahrverhalten.
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:2.4L Engines (Sales Code ED3 or ED7)P0335 - Crankshaft Position Sensor Circuit. P030X - Cylinder X Misfire Improvements when P0335 (Crankshaft Position Sensor Circuit) is present. P0456 - EVAP System Small Leak. P1607 - PCM Internal Shutdown Timer Slow Rationality. P2610 - PCM Internal Engine Off Timer Performance. Customers may also notice one or more of the following symptoms:When coming to a stop or making a turn, their vehicle would suddenly shutoff. Mostly noted in high ambient conditions greater than 40 C (105 F)(ED3 Engine only). A hesitation/surge feel that some customers might note it feels like misfire at 65-110 kph (40-70 mph) in 4th gear lock up(ED3 Engine only). In addition, the following software enhancements are available:Start Improvements for cold or high altitude starts when using E15 fuel(ED3 Engine only). 3.6L Engine (Sales Code ERB)P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.This bulletin applies to vehicles within the following markets/countries: NAFTA, LATAM, EMEA and APAC. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory:2.4L EngineP0335 - Crankshaft Position Sensor Circuit. P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P1607 - PCM Internal Shutdown Timer Rationality - (Powertrain Control Module). P2610 - PCM Internal Engine Off Timer Performance - (Powertrain Control Module). P0456 - EVAP System Small Leak. P0441 - EVAP Purge System Performance. P0443 - EVAP Purge Solenoid Circuit. P0116 - Engine Coolant Temperature Sensor Performance. P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. U0140 - Lost Communication With Body Control Module (BCM). Customers may also notice one or more of the following symptoms:When coming to a stop or making a turn, their vehicle would suddenly shutoff. Mostly noted in high ambient conditions greater than 40 C (105 F)(ED3 Engine only). A hesitation/surge feel that some customers might note it feels like misfire at 65-110 kph (40-70 mph) in 4th gear lock up(ED3 Engine only). In addition, the following software enhancements are available:Start Improvements for cold or high altitude starts when using E15 fuel(ED3 Engine only). 3.6L EngineP0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. P0456 - EVAP System Small Leak. P0300 - Multiple Cylinder Misfire. P000A - Bank 1 Camshaft 1 Position Slow Response. P000B - Bank 1 Camshaft 2 Position Slow Response. In addition, the following software enhancement is available:Improved shift quality.
Flash: Powertrain Diagnostic and System ImprovementsThis bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience the following symptom or conditions or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following (DTCs):JC Vehicles equipped with a 2.4L engine (Sales Code ED3 or ED7): **P0335 - Crankshaft Position Sensor Circuit. P050B - Cold Start Ignition Timing Performance. P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible.** U0140 - Lost Communication With Body Control Module. Attempting to clear the DTC may be unsuccessful. P0456 - Evap purge system small leak. 2-1 downshift improvement. Charging system duty cycle enhancement to improve starting performance in low ambient temperatures. P219A - Bank 1 Air-Fuel Ratio Imbalance. Enhanced Automatic Oil Change Indicator (EAOCI) system enhancements that forcethe use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicleduty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message. Mode 6 data accuracy enhancement for generic scan tools. JC Vehicles equipped with a 3.6L engine (Sales Code ERB): **P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance.** U0140 - Lost Communication With Body Control Module. Attempting to clear theDTC may be unsuccessful. Enhanced Automatic Oil Change Indicator (EAOCI) system enhancements that forcethe use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicleduty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controll
"pentastar oil filter adapter before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated service bulletin number 09-008-15. ~ first: Nick morand cell (248) 410-5078 - nick.Morand@fcagroup.Com second: Bob jackson cell (248) 944-0466 - bob.Jackson@fcagroup.Com third: Joe lovell cell (734 309-6467 - joe.Lovell@fcagroup.Com if a response is not received within 15 mins, then proceed with the necessary repair."
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).