Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

DodgeDodge Nitro

2006–2011 · 1 generationen · 14 dokumentierte Mängel · 3 Märkte
Generationen
Alle GenerationenNitro2006–2011142055

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
BulletinMittelSonstigesNA

Bulletin

wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP-System kleines Leck

NHTSA · Herstellerbulletin10236933Modelljahre 2012Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelMotorNA

Bulletin

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

NHTSA · Herstellerbulletin10230180Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

NHTSA · Herstellerbulletin10221594Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.

NHTSA · Herstellerbulletin10229181Modelljahre 2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

NHTSA · Herstellerbulletin10223854Modelljahre 2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelBremsenNA

Bulletin

Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure

NHTSA · Herstellerbulletin10139956Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

Ram/dodge\jeep service campaign: See document search button for owner letter. The engine water pump on certain vehicles may leak coolant. Engine operation with a low coolant level could cause engine damage or low cabin heater output. Csc letter was rec'd. *pe

NHTSA · Herstellerbulletin10034071Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

Chrysler\dodge service campaign: See document search button for owner letter. An incorrect positive crankcase ventilation (pcv) valve may have been installed. An incorrect pcv valve can cause excessive exhaust emissions. Csc letter was received. *pe

NHTSA · Herstellerbulletin10028832Modelljahre 2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Emissions recall g45--veci label - an incorrect vehicle emission control information (veci) label was installed on about ten thousand vehicles. The originally installed veci label does not display the correct spark plug information. *nj

NHTSA · Herstellerbulletin10023661Modelljahre 2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Slight play in steering/stiff/choppy/bumpy ride. *nj

NHTSA · Herstellerbulletin10023393Modelljahre 2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Steering angle sensor - not initialized/internal. *kb

NHTSA · Herstellerbulletin10021984Modelljahre 2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

LIFTER, hydraulischer Rollen-Deaktivierungsstößel Bitte tauschen Sie MDS-Stößel nicht aus, nur weil der Trennstift nicht ausgerichtet ist. Das ist normal und kein Defekt.

NHTSA · Herstellerbulletin10248517Modelljahre 2012Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

LIFTER, Hydraulischer Rollenstößel mit Deaktivierung Bitte tauschen Sie die MDS-Stößel nicht aus, wenn der Trennstift nicht fluchtet. Dies ist normal und kein Defekt.

NHTSA · Herstellerbulletin10244356Modelljahre 2012Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

SCHLÜSSEL, Master Wenn Sie den Schlüssel/FOBIK an einem WJ, KJ, TJ oder PT Cruiser ersetzen, verwenden Sie die Teilenummer auf "AC"-NIC-Level. Die "AB"-NIC-Ebene wird nicht auf diese Plattformen programmiert. Für alle anderen Plattformen: Wenn die "AB"-NIC-Ebene nicht auf das Fahrzeug programmiert wird, verwenden Sie das "AC"-NIC-Level und reichen Sie eine Teilegarantie ein.

NHTSA · Herstellerbulletin10229256Modelljahre 2005Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringGetriebeNA

Bulletin

Customer Satisfaction Notification V51 Reprogram Powertrain Control Module

NHTSA · Herstellerbulletin10228020Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Warranty Bulletin D-20-17 (X85) Active Head Restraint - Select 2012-2013 Jeep Liberty (KK) and 2012 Dodge Nitro (KA) (Rev. A)

NHTSA · Herstellerbulletin10224064Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

SCHLÜSSEL, Master Wenn Sie den Schlüssel/FOBIK an einem WJ, KJ, TJ oder PT Cruiser ersetzen, verwenden Sie die Teilenummer auf "AC"-NIC-Level. Die "AB"-NIC-Ebene wird nicht auf diese Plattformen programmiert. Für alle anderen Plattformen: Wenn die "AB"-NIC-Ebene nicht auf das Fahrzeug programmiert wird, verwenden Sie das "AC"-NIC-Level und reichen Sie eine Teilegarantie ein.

NHTSA · Herstellerbulletin10221686Modelljahre 2005Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringGetriebeNA

Bulletin

Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders

NHTSA · Herstellerbulletin10221150Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringGetriebeNA

Bulletin

Getriebekit mit Drehmomentwandler 1. Alle Fahrzeuge mit Promaster (VF) 3,6L/62TE. Wenn die Getriebehalterung der Getriebegehäusebefestigungen während der Wartung entfernt wird, sind die Befestigungen (Teilenummer 0651385A$) einmaliger Gebrauch. Fahrzeuge, die vor dem 23.10.2015 gebaut wurden, benötigen Service Kit PN 68461214AA; enthält Getriebeisolator PN 68264483AA, Anpassungshalter 68264479AA und Befestigungsservicekit PN 68329056AA. Fahrzeuge, die nach oder nach dem 23.10.2015 gebaut wurden, benötigen nur das Befestigungsservicekit PN 68329056AA. 2. Alle Fahrzeuge mit 3,6L/62TE. Wenn das zu reparierende Fahrzeug einen Riss in der Flexplatte oder eine defekte Pumpenbuchse hat, überprüfen Sie und prüfen Sie, ob beide (2) Dübelstifte im Motorblock vorhanden sind, die die Getriebemittelleitung mit der Kurbelwellenmittellinie ausrichten, und überprüfen Sie die Dübelausrichtungslöcher im Getriebegehäuse. Beschädigt oder verlängert ist, sollte das Getriebe ersetzt werden, um weitere Beschädigungen am Getriebe/Flexplatte oder Pumpenbuchse zu vermeiden, da der Motor während der Reparatur nicht richtig auf das Getriebe ausgerichtet ist. 3. Alle 62TE-Fahrzeuge. Wenn die Pumpenbuchse eingeritzt oder beschädigt sind und die Ausrichtungslöcher der Dübel in Ordnung sind, ersetzen Sie die Pumpenbaugruppe statt des kompletten Getriebes. 4. Alle 62TE-Fahrzeuge. Wenn das Fahrzeug mit MIL-Codes P0740 oder P2764 ruckt/rutscht, überprüfen Sie den Betrieb des TCC-Magnetventils. Wenn das TCC-Solenoid in Ordnung ist, deuten die Codes auf einen Ausfall des Drehmomentwandlers hin. Ersetzen Sie den Drehmomentwandler.

NHTSA · Herstellerbulletin10220840Modelljahre 2005Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Warranty Bulletin D-20-21 (X91) Active Head Restraint - Select 2010 Dodge Journey (JC), Dodge Avenger/Chrysler Sebring (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan (RT)

NHTSA · Herstellerbulletin10187658Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Warranty Bulletin D-20-22 (X92) Active Head Restraint - Select 2011 Dodge Journey (JC), Dodge Avenger/Chrysler 200 (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan (RT), Dodge Durango (WD), Jeep Grand Cherokee (WK)

NHTSA · Herstellerbulletin10187659Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Warranty Bulletin D-20-17 (X85) Active Head Restraint - Select 2012-2013 Jeep Liberty (KK) and 2012 Dodge Nitro (KA) (Rev. B)

NHTSA · Herstellerbulletin10187663Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Warranty Bulletin D-20-21 (X91) Active Head Restraint - Select 2010 Dodge Journey (JC), Dodge Avenger/Chrysler Sebring (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan/Chrysler Town & Country (RT) (Rev. A)

NHTSA · Herstellerbulletin10187667Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Active Head Restraint (AHR) Inadvertent Deployment - X92 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.

NHTSA · Herstellerbulletin10187680Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringInnenraumNA

Bulletin

Active Head Restraint (AHR) Inadvertent Deployment - X91 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacinga front seat AHR that has inadvertently deployed. Customers may comment on the following: The AHR is deployed on one or both front seats and will not reset.

NHTSA · Herstellerbulletin10187684Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).