Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

DodgeDodge Ram II

1993–2001 · 26 dokumentierte Mängel · 2 Märkte
Modelljahr
MarktAlleNA
RückrufKritischInnenraumNA

Air bags

Vehicle description: Pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: The ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th vin position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th vin position) from may 23, 2000 through october 23, 2000. Important: Vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.

NHTSA · USA8. Mai 200101V153000Modelljahre 1997–2000Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischInnenraumNA

Seat belts:Front:Retractor

Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.

NHTSA · USA11. Apr. 200101V119000Modelljahre 1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Air bags:Frontal

Vehicle description: Van and wagon model passenger vehicles. If water/road salt gets on the interior floor of the vehicle in the proximity of the air bag electronic control module (aecm), the aecm can corrode. The resulting corrosion can cause the driver side air bag to deploy inadvertently.

NHTSA · USA5. Feb. 199999V023000Modelljahre 1995–1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Air bags

Vehicle description: Vans and vans used for conversion. If a heavy object impacts the metal casing of the air bag electronic control module (aecm), located under the driver seat, the module could inadvertently deploy the air bags.

NHTSA · USA7. Jan. 199999V002000Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Seats And Restraints

On certain Club Cab and Quad Cab vehicles, the front outer seat belt buckles may not have been properly riveted to the support strap. This could result in a seat belt assembly with reduced strength. Correction: Front outer seat belt buckles will be replaced with buckles that have been properly riveted.

Transport Canada3. Juni 19981998113Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Seat belts:Front:Buckle assembly

Vehicle description: Passenger vehicles. The front seat belt buckles were not properly riveted to the support strap.

NHTSA · USA14. Mai 199898V105000Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Seats And Restraints

Certain vehicles do not comply with CMVSS 208 - Seatbelt installations. Under severe collision conditions, the passenger side seat belt may may release as the result of shattering and displacement of the latch plate cinch bar. Correction: Passenger side seat belt cinch bar will be replaced with a cinch bar made from nylon material which crushes and remains in position during loading.

Transport Canada31. Jan. 19951995009Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Seat belts:Front:Buckle assembly

The cinch bar component within the passenger side safety belt buckle assembly shatters causing the belt to release.

NHTSA · USA18. Jan. 199595V005000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Seats And Restraints

These vehicles do not comply with c.M.V.S.S. 207 - anchorage of seats. Seat back latch lever could bind due to distortion of the rivet for the latch lever pivot. Correction: Seat back latch assembly will be replaced with a revised assembly.

Transport Canada17. Jan. 19941994009Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumNA

Seats:Front assembly:Recliner

The seat back latch lever pivot rivets are susceptible to distortion. The distorted assemblies allow the seat back release latch lever to remain in the released position which is in non-compliance with fmvss no. 207, "seating systems."

NHTSA · USA14. Dez. 199393V213000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).