Diese Akte sammelt die bekannten Mängel des Ford F-Series twelfth generation, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.
Halter melden bei diesem Auto häufig Probleme mit transmission and drivetrain (3110 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit engine (1917 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
1,039 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2009–2013), typically at around 66,000 miles. Reported consequences: 14 crashes, 64 fires, 14 injuries.
842 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2009–2013), typically at around 57,000 miles. Reported consequences: 73 crashes, 5 fires, 31 injuries, 4 deaths.
NHTSA, the US road safety agency, opened an engineering analysis (EA15006) into this problem on 16 October 2015 for 2011–2012 models; it was closed on 28 April 2016 without a recall.
Problem: Dieser Rückruf betrifft nachträglich Ersatz für das von Vitro Automotriz hergestellte Heckscheibenglas. Bestimmte Heckscheibenscheiben wurden möglicherweise nicht richtig gehärtet. Wenn das Fenster zerbricht, kann sich das Glas in große statt sehr kleine Stücke trennen. Hinweis: Dies ist ein freiwilliger Rückruf, der nicht gemäß den Anforderungen des Motor Vehicle Safety Act durchgeführt wird. Sicherheitsrisiko: Glas, das in große Stücke zerbricht, kann ein Verletzungsrisiko darstellen. Korrekturmaßnahmen: Das Unternehmen benachrichtigt die Verbraucher per Post und weist sie an, den auf der Heckscheibenscheibe markierten Bezeichnungscode zu überprüfen. Von diesem Rückruf betroffene Produkte tragen die Bezeichnung "DOT 287" sowie die Beschriftung "VMR" (Replacement Market) und einen Datumscode aus der Zeit vor Juli 2019. Diese Information ist in der unteren Ecke des Glases aufgedruckt. Verbraucher sollten den Kundenservice von Vitro unter 1-412-995-6457 oder argbacklites@vitro.com kontaktieren, um einen Austausch des Glases zu vereinbaren.
Transport Canada21. Aug. 20192019420Modelljahre 2009–2013Automatisch übersetzt · Original: EnglischDetails ansehen →
Ford Motor Company (Ford) is recalling certain 2013 F-150 vehicles equipped with 5.0L or 6.2L gasoline engines, that previously had the powertrain control module (PCM) software reprogrammed under recall 19V-075. The software used to reprogram the PCM did not have the necessary updates to prevent the transmission from unexpectedly downshifting into first gear, regardless of vehicle speed.
NHTSA · USA10. Juni 201919V433000Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) is recalling certain 2011-2013 F-150 vehicles equipped with a 6-speed automatic transmission. The transmission may unexpectedly downshift into first gear, regardless of vehicle speed.
This SKU is a DEF Injector. The customer communication requested return of unsold inventory to inspect the sealing. The injector sealing may have an issue which will cause a slow leak. A slow leak of the DEF Injector can lead to crystal formation which can cause aftertreatment related fault codes and ECU driven engine derating.
Some 2019 F-150 Raptor vehicles built on or before 15-Nov-2018 may exhibit a harsh or bumpy ride during all driving conditions. To resolve this concern, reprogram the vehicle dynamics control module (VDM) using the latest software version of the appropriate Ford diagnostic scan tool. For claiming, use causal part 18B008 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).