Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Some 2025 Bronco vehicles may exhibit diagnostic trouble code (DTC) U0137 stored in the instrument panel cluster (IPC) after installation of the dealer installed option (DIO) trailer tow package. To correct this condition, download and run the latest version of the towbar configuration application using the latest version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 15A416 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2025 Bronco vehicles may exhibit a "procedure unsuccessful" message after running the towbar configuration application using Ford Diagnosis and Repair System (FDRS) scan tool. This may be due to the incorrect trailer tow kit being installed. Trailer modules (TRM) are model year specific. A 2024 Bronco requires the installation of trailer tow kit VP2DZ-15A416-B and a 2025 Bronco requires the installation of trailer tow kit VS2DZ-15A416-C.
Some 2024 Bronco vehicles equipped with a dealer installed trailer tow kit may exhibit a "No Key Detected" message displayed in the IPC. This may be due to the remote keyless entry (RKE) antenna connection being left loose or disconnected during trailer tow kit installation. Verify that the vehicle is equipped with the trailer tow kit by checking the window sticker for the trailer tow kit option. If the vehicle was equipped with this dealer installed option, before performing normal diagnostics, inspect the RKE antenna connections located behind the left/rear interior quarter panel. If they are loose or unplugged, re-secure the connector(s) and retest operation. If no loose or unplugged connections are found, refer to Workshop Manual (WSM), Section 419-01 for normal diagnostics. If this vehicle does not have the dealer installed option, refer to the WSM, Section 419-01 for normal diagnostics.
Quality improvements include: -Addresses SYNC reboot issue may occurs after 2 hours of continuous use. -Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. -Vehicle Enhancement: Software Updates currently has the title Recurring Update Schedule in Setting, Tittle will change to Reccuring Schedule
2024 Bronco (non-Raptor) vehicles will not come from the factory with a pre-installed trailer tow package that includes a 2 in. (50.8 mm) trailer hitch, a 4+7 pin electrical connector and supporting software updates. The trailer tow package for the 2024 Bronco (non-Raptor) will only be available as a Ford Accessory Dealer Installed Option (DIO) (service part number VP2DZ-15A416-B). When ordered, the DIO trailer tow package will ship to the dealership that will receive the vehicle so that installation can occur prior to customer delivery. Labor is included with the cost of the Ford Accessory DIO trailer tow package and must not be charged to Ford through warranty.
Software Update SU6 P2 for PU1103-NAT-VCE for 2023 MY Bronco vehicles is now available. Quality improvements include: - Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. -Addresses SYNC reboot issue may occur after 2 hours of continuous use.
Some 2022 Bronco vehicles that have added the Ford accessory JBL soundbar may experience difficulty in programming after installation. This may be due to the Ford Diagnosis and Repair System (FDRS) function not successfully programming this accessory to the vehicle's factory sound system. FDRS software has been updated to support a successful installation of the Ford accessory JBL soundbar. Perform the FDRS programming function again using the installation instructions provided with the speaker on vehicles that meet this criteria.
Some 2018-2021 EcoSport, Expedition, Navigator; 2019-2021 Ranger; 2020-2021 Escape, Corsair, Explorer, Transit; 2021 Bronco, Bronco Sport, Edge, Nautilus, F-150, Mustang; 2019-2022 Transit Connect; 2020-2022 Aviator, F-Super Duty; and 2022 Maverick vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0496, P0456, P0455, P04F0, and/or P0451. Ford has tested returned EVAP canister purge valves and found them to be fully functional. Prior to replacing the canister purge valve or other EVAP components, perform the following tests using the Ford Diagnosis and Repair System (FDRS) Scan Tool: Full System EVAP Leak Test - FDRS Location: TOOLBOX > PCM > PCM - Evap Emissions System Test and the EVAP Purge Valve Leak Test - FDRS Location: TOOLBOX > PCM > Evap Emission System Toolbox > CPV Check.
Some 2021 Bronco vehicles may experience multiple warning indicators / messages displayed in the instrument panel cluster (IPC) and/or multiple communication fault diagnostic trouble codes (DTC) setting in and/or related to the HS2-CAN modules. This may be due to a loose and/or improperly seated connector C210. If the vehicle exhibits the above conditions, access and inspect connector C210 for proper attachment and/or damage and repair as necessary. To access the connector, remove the right side lower cowl side panel (follow Workshop Manual, (WSM) Section 415-00 > Removal and Installation > A-Pillar Speaker, Steps 9-10) and the glove compartment (follow WSM Section 501-12 > Removal and Installation > Glove Compartment). If this fault persists, refer to WSM Section 418-00A and continue with normal diagnostics.
Some 2025 Bronco vehicles equipped with a 7-speaker audio system (minor feature code IDBAL) may exhibit an intermittent no audio condition. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). To correct this condition, reprogram the audio front control module (ACM) using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming use causal part 18806 and labor operations 12651D and 12651D4.
Some 2025 Bronco vehicles may exhibit a condition where the 24-hour clock reverts back to the 12-hour format after each key cycle. This may be due to the software in the accessory protocol interface module (APIM).
Some 2025 Bronco vehicles equipped with a 7 speaker audio system (minor feature code IDBAL) may exhibit diagnostic trouble codes (DTCs) B128A:01, B128A:11, B128A:12, B128A:13, B1288:11, B1288:12 and/or B1238:17 stored in the audio front control module (ACM). To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). Clear the DTCs and if the DTCs return with no customer facing symptoms, this condition may be due to the ACM software. Replacement of the ACM and/or speakers will not resolve this condition. Inform the customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. Continue to monitor PTS for additional information and schedule service appointments for customers once the repair becomes available.
Some 2025 Bronco vehicles equipped with a 7-speaker audio system (minor feature code IDBAL) may exhibit an intermittent no audio condition. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). To correct this condition, disconnect the negative battery cable and wait two minutes before reconnecting to temporarily restore audio. Inform the customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. Continue to monitor PTS for additional information and schedule service appointments for customers once the repair becomes available.
Some 2025 Bronco vehicles equipped with a 7 speaker audio system (minor feature code IDBAL) may exhibit an intermittent no audio condition and/or speaker fault with diagnostic trouble codes (DTCs) B128A:01, B128A:11, B128A:12, B128A:13, B1288:11, B1288:12 and/or B1238:17 stored in the audio control module (ACM). To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). To correct this condition, disconnect the negative battery cable and wait two minutes before reconnecting. If the no audio condition is not resolved, refer to the Workshop Manual (WSM), Section 415-00 for normal diagnostics outside of this article. If the no audio condition is resolved and the DTCs remain, this concern may be due to the ACM software. Replacement of the ACM and/or speakers will not resolve this condition. Inform the customers that they can continue to drive the vehicle and engineering
Certain 2025 Model Year Bronco, Explorer, Mustang, and Ranger Vehicles Engine Coolant Temperature Sensor Replacement On all affected vehicles, the Engine Coolant Temperature sensor (ECT) may have a poor solder joint internally, causing a Diagnostic Trouble Code (DTC) to set against the sensor for an open circuit and the check engine light to illuminate
Some 2023-2024 F-150 and 2024 Bronco/Transit vehicles may exhibit Apple Carplay Bluetooth connectivity concerns. This may be due to the accessory protocol interface module (APIM) software. To correct this concern, perform a soft reset by pressing the Power and Seek Foward buttons for 5 seconds, or use the SYNC Module Reset function of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G670 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2023 Bronco vehicles may exhibit diagnostic trouble code (DTC) U2101 stored in accessory protocol interface module (APIM) and/or telematics control unit (TCU) after TCU module programming with no additional symptoms present. This may be due to the TCU configuration. To correct the concern, download and run the TCU-Telematics Control Unit (TCU) Module Configuration application using Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14F546 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Software Update 23- PU0605-STBR-DSC for 2022 MY BRONCO vehicles is now available. Quality Improvements include: - Address incorrectly setting the Sta-Bar Disconnect DTC issue.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).