Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Some 2026 Bronco Raptor vehicles built on 17-Mar-2026 and through 27-Aug-2026 may exhibit no image when turning on the digital display interior rear view mirror. This may be due to a compatibility issue with the digital display interior rear view mirror camera and the digital display interior rear view mirror. Verify the part number level of the digital display interior rear view mirror camera. Refer to Workshop Manual (WSM), Section 501-09A. If service part number S2DZ-19G490-A/engineering part number S2DV-13A976-AA is installed on the vehicle, replace the digital display interior rear view mirror camera with service part S2DZ-19G490-B. Refer to WSM, Section 501-09A. For claiming, use causal part 19G490 and labor operation 19490A. If the vehicle is equipped with service part number S2DZ-19G490-B/engineering part number S2DV-13A976-AB, refer to WSM, Section 413-13B > Diagnosis and Testing for normal diagnostics and repair as necessary outside of this article.
Some 2025 Bronco Raptor vehicles may exhibit a concern where certain selectable drive modes (G.O.A.T. modes) are unavailable after the ABS module receives a software update. Customers may also report that the "Offroad" mode is not visible and/or after switching to the "Baja" or "Rock Crawl" drive modes, the vehicle returns back to "Normal" mode. To correct this condition, download and run the "ABS - Anti-Lock Brake System (ABS) Module Software Update" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming use causal part 2005 and labor operations 2219D and 2219D44.
Some 2025 Bronco non-Raptor vehicles may exhibit a concern where certain selectable drive modes (G.O.A.T. modes) are unavailable after the ABS module received a software update. Customers may report that the vehicle is missing the "Mud/Ruts" and/or "Sand" drive mode(s). To correct this condition, download and run the "ABS - Anti-Lock Brake System (ABS) Module Software Update" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming use causal part 2005 and labor operations 2219D and 2219D44.
Some 2024-2025 F-150, Expedition/Navigator, Escape/Corsair, Bronco, Explorer, Mustang, Maverick vehicles equipped with a 1.5/2.0/2.3/3.5L EcoBoost engine and built on 01-Oct-2024 and through 31-May-2025 may exhibit an extended crank condition, strong fuel smell in the engine oil, high engine oil level and/or may have various drivability diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) with an illuminated malfunction indicator lamp (MIL). This may be due to an internal fuel leak of the high-pressure fuel pump causing fuel to enter the crankcase and reduce fuel pressure in the direct injection fuel rail. Diagnose this condition using Pinpoint Test HP located in Workshop Manual (WSM), Section 303-04. If no DTCs are stored in the PCM, proceed from Step HP1 to Step HP5 and continue testing. Repair as necessary outside of this article. For claiming, if high-pressure fuel pump replacement is required, use causal part number 9D376 and labor operation code 9543A. If the root cause is identified as anything other than the fuel injection pump, claim the repair outside of this article.
Some 2025 Bronco/Ranger vehicles equipped with a 2.7L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM) with no other relevant DTCs present. Refer to Workshop Manual (WSM), Section 303-08B Engine Emission Control > Diagnosis and Testing > Crankcase Ventilation > Pinpoint Test > steps HG1-3 to check for leaks in the positive crankcase ventilation (PCV) and repair as needed. If no leaks are found in the PCV system, this condition may be due to the software in the PCM. This condition does not affect vehicle durability and no additional diagnosis is required for this condition at this time. The replacement of components or reprogramming of modules will not resolve this condition. Clear the DTC and return the vehicle to the customer. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. If a vehicle comes in for this condition, submit a Global Concern Report (GCR) and monitor Professional Tech
Some 2024-2025 F-150, Expedition/Navigator, Escape/Corsair, Bronco, Explorer, Mustang, Maverick vehicles equipped with a 1.5/2.0/2.3/3.5L EcoBoost engine and built on 01-Oct-2024 and through 31-May-2025 may exhibit an extended crank condition, strong fuel smell in the engine oil, high engine oil level and may have various drivability diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) with an illuminated malfunction indicator lamp (MIL). This may be due to an internal fuel leak of the fuel injection pump causing fuel to enter the crankcase and reduce fuel pressure in the high pressure fuel rail. Diagnose this condition using Pinpoint Test HP located in the Workshop Manual, Section 303-04A. If no DTCs are stored in the PCM, proceed from Step HP1 to Step HP5 and continue testing. For claiming, if fuel injection pump replacement is required, use causal part number 9D376 and labor operation code 9543A. If the root cause is identified as anything other than the fuel injection pump, claim the repair outside of this article. Note: Components damaged as a result of this failure mode
Some 2025 Bronco vehicles equipped with a 2.3/2.7L EcoBoost engine built on or before 12-June-2025 and 2025 Bronco Raptor vehicles equipped with a 3.0L EcoBoost engine built on or before 18-June-2025 may exhibit various illuminated brake system warning lamps/fault messages at start up with diagnostic trouble codes (DTCs) C003A:4A, C003A:64, C0037:4A, C0037:64, C2005:1D, C2005:78, C2006:1D, and/or C2006:78 stored in the anti-lock brake system (ABS) module. To correct this condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 2005 and labor operations 2219D and 2219D44 in Section 02 of the Service Labor Time Standards (SLTS) Manual.
Some 2025 Bronco vehicles equipped with a 2.3/2.7L EcoBoost engine built on or before 12-June-2025 and 2025 Bronco Raptor vehicles equipped with a 3.0L EcoBoost engine built on or before 18-June-2025 may exhibit an illuminated anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) U3012:68 stored in the ABS module. The vehicle may also exhibit any of the following symptoms: a soft brake pedal following vehicle start-up, various brake system illuminated warning lamps and/or brake-related messages displayed in the instrument panel cluster (IPC). This may be due to a controller area network (CAN) communication concern within the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 2005 and labor operations 2219D and 2219D44 in Section 02 of the Service Labor Time Standards (SLTS) Manual.
Some 2025 Bronco and Ranger vehicles may exhibit various illuminated brake system warning lamps/fault messages at start up with diagnostic trouble codes (DTCs) C003A:4A, C003A:64, C0037:4A, C0037:64, C2005:1D, C2005:78, C2006:1D, and/or C2006:78 stored in the antilock brake system (ABS) module. To correct this condition, clear the DTCs, turn the ignition off and then back on, engage and disengage the park brake and then run a self-test. If any DTCs return, refer to the Workshop Manual (WSM) for normal diagnosis. If the DTCs clear, this concern may be due to the ABS software and replacement of the ABS module or wheel speed sensors will not resolve this condition. Inform the customers they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q3 of 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
Some 2025 Bronco vehicles may exhibit an illuminated anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) U3012:68 stored in the ABS module. The vehicle may also exhibit any of the following symptoms: a soft brake pedal following vehicle start-up, various brake system illuminated warning lamps and/or brake-related messages displayed in the instrument panel cluster (IPC).
Some 2025 F-150/Expedition/Navigator/Bronco/Ranger vehicles may exhibit diagnostic trouble code (DTC) U3012:68 stored in the anti-lock brake system (ABS) module with a soft brake pedal following vehicle start-up with various brake system illuminated warning lamps and/or brake-related messages displayed in the instrument panel cluster (IPC). This may be due to a controller area network (CAN) communication concern within the ABS module. Replacement of the ABS module will not resolve this condition. To resolve this condition, place the vehicle in park. Disengage the park brake. Turn the vehicle off. Close all doors and liftgate/tailgate. Allow the vehicle to sit for 5 minutes to allow all vehicle modules to power down. Restart the vehicle. Verify brake functionality and clear any DTCs. Pressing unlock/lock button on the key fob, opening the doors/liftgate/tailgate or keeping the key fob within 30 ft (8 meters) of the vehicle can prevent the modules from powering down completely. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition
Some 2025 Bronco vehicles may exhibit diagnostic trouble code (DTC) U0137 stored in the instrument panel cluster (IPC) after installation of the dealer installed option (DIO) trailer tow package. To correct this condition, download and run the latest version of the towbar configuration application using the latest version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 15A416 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2025 Bronco vehicles may exhibit a "procedure unsuccessful" message after running the towbar configuration application using Ford Diagnosis and Repair System (FDRS) scan tool. This may be due to the incorrect trailer tow kit being installed. Trailer modules (TRM) are model year specific. A 2024 Bronco requires the installation of trailer tow kit VP2DZ-15A416-B and a 2025 Bronco requires the installation of trailer tow kit VS2DZ-15A416-C.
Some 2024 Bronco vehicles may be unable to program the trailer brake module (TRM) during installation of the dealer installed option/accessory "Trailer Tow Kit".
Some 2024 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) modul
Some 2024 Bronco vehicles built on and before 23-Jun-2024 may exhibit a no crank/no start, discharged battery due to a parasitic battery drain condition. This may be due to the body control module C (BCMC). Perform battery drain test, refer to Workshop Manual (WSM) Section 414-01 Battery, Mounting and Cables - General Procedures - Battery Drain Check. If a battery drain of more than 1 Amp is identified, inspect fuse 8 in the BCMC for available voltage with the vehicle off and resting. If voltage is found, verify the draw is eliminated by removing fuse 8. If removing the fuse eliminates the draw, replace the BCMC.
Some 2024 Bronco vehicles equipped with a dealer installed trailer tow kit may exhibit a "No Key Detected" message displayed in the IPC. This may be due to the remote keyless entry (RKE) antenna connection being left loose or disconnected during trailer tow kit installation. Verify that the vehicle is equipped with the trailer tow kit by checking the window sticker for the trailer tow kit option. If the vehicle was equipped with this dealer installed option, before performing normal diagnostics, inspect the RKE antenna connections located behind the left/rear interior quarter panel. If they are loose or unplugged, re-secure the connector(s) and retest operation. If no loose or unplugged connections are found, refer to Workshop Manual (WSM), Section 419-01 for normal diagnostics. If this vehicle does not have the dealer installed option, refer to the WSM, Section 419-01 for normal diagnostics.
Quality improvements include: -Addresses SYNC reboot issue may occurs after 2 hours of continuous use. -Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. -Vehicle Enhancement: Software Updates currently has the title Recurring Update Schedule in Setting, Tittle will change to Reccuring Schedule
2024 Bronco (non-Raptor) vehicles will not come from the factory with a pre-installed trailer tow package that includes a 2 in. (50.8 mm) trailer hitch, a 4+7 pin electrical connector and supporting software updates. The trailer tow package for the 2024 Bronco (non-Raptor) will only be available as a Ford Accessory Dealer Installed Option (DIO) (service part number VP2DZ-15A416-B). When ordered, the DIO trailer tow package will ship to the dealership that will receive the vehicle so that installation can occur prior to customer delivery. Labor is included with the cost of the Ford Accessory DIO trailer tow package and must not be charged to Ford through warranty.
Software Update SU6 P2 for PU1103-NAT-VCE for 2023 MY Bronco vehicles is now available. Quality improvements include: - Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. -Addresses SYNC reboot issue may occur after 2 hours of continuous use.
Some 2021 Bronco vehicles built on or before 01-Sep-2021 equipped with a factory soft top roof may not have the hard top roof prep kit. The prep kit includes the controls, wiring, hoses and module configurations required to have a functional rear wiper, washer and defroster. Without the prep kit installed from the factory, the rear wiper, washer and defroster, will not function. The prep kit can be identified on the window sticker as Soft-Top, Cloth W/Prep Kit under the optional equipment/other heading. This is a normal condition and no repairs/upfitting should be performed. Do not submit a claim for this condition.
Software Update SU6 P1 for 2023 BRONCO vehicles is now available. Quality improvements include: - Prevent unintended fuel level MIL after future OTA updates - Enhanced electronic brake booster to improve the braking experience when vehicle is flat towed.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).