Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
NHTSA · USA18. Mai 202323V358000Modelljahre 2021–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) ruft bestimmte Fahrzeuge des Modells Bronco 2026 zurück. Die Halterung des rechtsseitigen Seitenvorhang-Airbags könnte einen Metallgrat aufweisen, der den Airbag beim Auslösen einreißen kann.
프레임(Pivot link) 제조 업체의 공정 절차 오류로 인한 볼트 풀림 방지 접착제의 접착력 저하로 인해 해당 볼트가 느슨해질 경우 시트 쿠션에서 소음이 발생하거나 유격이 느껴질 수 있으며, 볼트가 이탈되면 충돌 시 탑승자의 부상 위험이 증가할 수 있음이 확인됨에 따른 리콜
MOLIT · Südkorea2. Juli 20266293Modelljahre 2024–2025Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
운전석 및/또는 조수석 시트 높이 조절 장치 프레임(Pivot link)에 볼트 장착부 규격 문제로 일부 고정 볼트가 점차 느슨해질 수 있으며, 이런 경우 시트 쿠션에서 소음이 발생하거나 유격이 느껴질 수 있고, 볼트가 이탈되면 충돌 시 탑승자의 부상 위험이 증가할 수 있음이 확인됨에 따른 리콜
MOLIT · Südkorea2. Juni 20266251Modelljahre 2022Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) is recalling certain 2024-2026 Ranger and Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.
공급 업체의 조립 과정에서 액티브 벤트 플랩이 장착되는 부분에 손상이 발생되었을 수 있으며, 이런 경우 에어백이 전개되는 충돌 발생 시 에어백 압력이 정상적으로 조절되지 않아 탑승자의 부상 위험이 높아질 수 있음이 확인됨에 따른 리콜 (이는 FMVSS (미국안전기준) 208번 탑승자 충돌 보호를 준수하지 못할 수 있음)
인포테인먼트 화면 관련 소프트웨어 오류가 있을 수 있으며, 이런 경우 인포테인먼트 화면이 정지되거나, 갑자기 시스템이 재부팅될 수 있고 어라운드 뷰(360º 카메라) 또는 후방 카메라 시스템 작동 중 이러한 현상이 발생되는 경우 주변 및/또는 후방 시야에 영향을 미쳐 충돌 위험을 증가시킬 수 있는 가능성이 확인됨에 따른 리콜
<대상차량별 생산일자> 2023~2024년식 Ranger Raptor: 2023.02.21~2023.08.23 2023년식 Ranger Wildtrak: 2023.07.18~2023.08.11 2024년식 Mustang: 2023.10.10~2023.12.13 2023년식 Nautilus: 2023.05.15~2023.08.11 2022~2024년식 Expedition: 2021.12.08~2024.05.15 2023~2024년식 Navigator: 2023.02.22~2023.08.08 2022~2024년식 Bronco: 2022.02.17~2023.12.07
Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.
Ford Motor Company (Ford) is recalling certain 2025 Bronco vehicles. The active vent flap on the passenger side may prevent the air bag from deploying as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
NHTSA · USA13. Juni 202525V396000Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) is recalling certain 2025 Ranger and Bronco vehicles. The bolts that secure the driver's seat frame to the body may be loose or missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."
NHTSA · USA9. Mai 202525V311000Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The right or left side impact sensors may not be properly secured to the vehicle.
Ford Motor Company (Ford) is recalling certain 2021 Bronco vehicles. During passenger air bag deployment, an air bag vent could open prematurely and result in an improper deployment. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".
The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.
Transport Canada17. Dez. 19831983114Modelljahre 1984Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The manufacturer suspects that the hardware that attaches the seat tracks (the strips that the seat slides on) to the floor may become loose or may fail to hold the seat in place during a collision. This condition is due to the substitution of an incorrect washer during manufacture. The vehicles may not comply with the strength requirements of federal motor vehicle safety standard 207, "seating systems".
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).