Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Ford Fusion Hybrid

2008–2020 · 3 generationen · 21 dokumentierte Mängel · 3 Märkte
Generationen

Alles zum Ford Fusion Hybrid, alle Generationen zusammen: Mängel, Rückrufe, Servicemitteilungen und Diskussionen. Wählen Sie eine Generation, um einzugrenzen.

Schwerwiegendste Mängel

Alle ansehen (21) →

Neueste Rückrufe

Alle ansehen (4) →
Fusion Hybrid I (2010) · 2008–2012
Fusion Hybrid Fusion Energi · 2013–2020
RückrufKritischElektrikNA

Equipment:Electrical

Ford Motor Company (Ford) is recalling certain 120V Convenience charge cords that were supplied with and sold for use with 2013-2015 Ford C-Max Energi and Fusion Energi vehicles and 2012-2015 Ford Focus Electric vehicles. Cords with part numbers FM58-10B706-AA, FM58-10B706-AB, FM58-10B706-AC, FM58-10B706-AD, FM58-10B706-AE and FM58-10B706-AF were manufactured without thermistors, and during vehicle charging, increased resistance in the house's outlet or wiring can cause the cord to overheat and melt.

NHTSA · USA10. Sept. 201818V592000Modelljahre 2013–2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fusion Hybrid Fusion Energi · 2013–2020
RückrufMittelGetriebeNA

Power train:Automatic transmission:Control module (tcm/pcm/tecm)

Ford Motor Company (Ford) is recalling certain model year 2014-2015 Ford Fusion vehicles manufactured July 27, 2013, to October 31, 2014, 2015 Ford Fusion Hybrid vehicles manufactured February 24, 2014, to October 31, 2014, and 2015 Ford Fusion Energi vehicles manufactured July 14, 2014, to October 31, 2014. In the affected vehicles, the key may be able to be removed even while the transmission is not in Park. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 114, "Theft Protection and Rollaway Prevention."

NHTSA · USA18. Nov. 201414V736000Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste technische Bulletins

Alle ansehen (40) →
Fusion Hybrid Fusion Energi · 2013–2020
BulletinGeringKarosserieNA

Bulletin

Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10250852Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fusion Hybrid Fusion Energi · 2013–2020
BulletinMittelMotorNA

Bulletin

This article supersedes TSB 22-2181 to update the Service Procedure and Part List. Some 2015-2017 Edge, 2016-2017 MKX, 2017 Fusion/MKZ/Continental vehicles equipped with a 2.7L EcoBoost or 3.0L EcoBoost engine may exhibit an oil leak from the engine oil pan RTV seal. This may be due to a lack of RTV adhesion. To correct the condition, follow the Service Procedure to replace the valve covers and replace the factory oil pan with a press in place gasket style oil pan.

NHTSA · Herstellerbulletin10244801Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fusion Hybrid Fusion Energi · 2013–2020
BulletinGeringKarosserieNA

Bulletin

Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10237977Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Forenthemen

Noch keine Diskussion.

Mängel und Diskussionen werden pro Generation geführt: Wählen Sie oben eine aus, um Ihren Beitrag hinzuzufügen.

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).