Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Bestimmte Fahrzeuge GV70 Electrified (JK1A EV) und G80 Electrified (RG3 EV) können beim Einschalten des Bereitschaftsmodus („Ready“) eine fehlerhafte Warnleuchte mit den Fehlercodes (Diagnostic Trouble Codes, DTC) U151A8C und/oder U151B8C anzeigen. Dieses Service-Bulletin beschreibt das Verfahren zur Aktualisierung der Software des Fahrzeugsteuergeräts (Vehicle Control Unit, VCU), um diesen Zustand zu beheben.
Certain GV70 (JK1, JK1A), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. Technical Service Bulletin (TSB) 26-01-003G-1 provides instructions to remove the old garnish and install new parts.
Certain GV70 (JK1, JK1A), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
Certain GV70 (JK1), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. Technical Service Bulletin (TSB) 26-01-003G provides instructions to remove the old garnish and install new parts.
Certain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
Certain GV70 (JK1, JK1A) vehicles may exhibit squeal noise during certain braking conditions. Follow the procedures in this bulletin to replace the front brake pads and radial springs to resolve the condition.
Certain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
Certain GV70 (JK1A) and GV70 Electrified (JK1A EV) vehicles may have an inoperative Wireless Phone Charger (WPC) due to an improper (non-NFC) part installation. This bulletin provides instructions to replace the Wireless Phone Charger with the Near Field Communication (NFC) feature.
Certain 2023-2024MY GV70 Electrified (JK1A EV) and 2024MY GV70 (JK1A) vehicles may experience a call button getting stuck/no return condition. Follow the information in this bulletin for replacing the phone call button on the steering wheel.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
This updated Vehicle Control Unit (VCU) software package includes the following: Brake light logic update for regenerative braking. i-Pedal mode operation logic update. 12V battery saver logic update allows charging from EV Battery as low as 10% SOC when parked.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Some GV70 (JK1/JK1A) and GV70 Electrified (JK1 EV) vehicles may exhibit an inoperative power tailgate latch where the cinching function does not activate or the latch does not engage, due to interference between internal latch components. This bulletin provides instructions to replace the power tailgate latch with an improved part to address these conditions.
Certain GV70 (JK1) vehicles may experience an intermittent A/C inoperative condition when the engine is started after the air conditioner has been operated with the ignition switch in the ON position. During engine cranking, a temporary low-voltage condition may cause the blower motor protection logic to activate, resulting in the A/C system turning OFF and remaining inoperative until the vehicle is restarted.
Certain GV70 (JK1) vehicles may experience an intermittent A/C inoperative condition when the engine is started after the air conditioner has been operated with the ignition switch in the ON position. During engine cranking, a temporary low-voltage condition may cause the blower motor protection logic to activate, resulting in the A/C system turning OFF and remaining inoperative until the vehicle is restarted. This bulletin provides the procedure to update the ATCU (Air Temperature Control Unit) software to revise blower motor protection logic and prevent this condition from occurring.
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain GV70 (JK1A) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain 2026MY GV70 (JK1A) and 2026MY GV70 Electrified (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletins (TSBs) 26-01-017G-1 26-01-018G-1 provide instructions to perform a software update for the DCU module. Over-the-Air (OTA): This update can also be conducted via OTA. Guests cancomplete on their own if they have an active subscription to Genesis Connected Services. A visit to retailers is not required if the update is conducted via OTA.
Bestimmte Fahrzeuge des Modelljahres 2026 G70 (IK) und des Modelljahres 2027 G80 (RG3) können beim Motorstart ein fließendes oder gluckerndes Geräusch aus den mittleren Frontlüftungsdüsen aufweisen. Diese Erscheinung kann durch im Motorkühlsystem eingeschlossene Luft verursacht werden. Führen Sie das folgende Verfahren aus, um das Kühlsystem ordnungsgemäß zu entlüften und die eingeschlossene Luft zu entfernen.
Certain 2026MY G70 (IK) and 2027MY G80 (RG3) vehicles may exhibit a water-flowing or gurgling noise from the front center air vents during engine start-up. This condition may becaused by trapped air within the engine cooling system. Technical Service Bulletin (TSB) 26-01-064G provides instructions to properly bleed the cooling system and remove any trapped air.
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizon's communication network. Technical Service Bulletin (TSB) 26-01-035G provides instructions to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletin (TSB) 26-01-018G provides instructions to perform the software update for the DCU module.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).