Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Bestimmte Fahrzeuge GV70 Electrified (JK1A EV) und G80 Electrified (RG3 EV) können beim Einschalten des Bereitschaftsmodus („Ready“) eine fehlerhafte Warnleuchte mit den Fehlercodes (Diagnostic Trouble Codes, DTC) U151A8C und/oder U151B8C anzeigen. Dieses Service-Bulletin beschreibt das Verfahren zur Aktualisierung der Software des Fahrzeugsteuergeräts (Vehicle Control Unit, VCU), um diesen Zustand zu beheben.
Certain 2023-2025MY GV70 Electrified (JK1A EV), 2023-25MY GV60 (JW1 EV) and 2023-25MY G80 Electrified (RG3 EV) vehicles may exhibit a condition while driving where the 12V battery voltage drops below the operational voltage and the Vehicle Control Unit (VCU) places the vehicle in Limp Home mode. The VCU software in this bulletin updates the maximum vehicle speeds for various levels of 12V battery voltage when the vehicle enters Limp Home mode.
This bulletin describes the procedure to install an Audio Video Navigation (AVN) software update which repairs a condition in which the radio presets may reset during AVN start up.
Certain 2023-2024MY G80 Electrified (RG3 EV), 2023-2024MY GV60 (JW1 EV), and 2023-2024MY GV70 Electrified (JK1a EV) may have a condition of the power down warning light (turtle symbol) with "Power is limited" displayed in the cluster, and possible DTC P0A2F. If you are servicing a vehicle with either of these conditions, follow this bulletin to inspect the EOP.
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
Some Genesis G80/G90 will arrive from Ports with a Solar Panel 12V Battery Maintainer box located on the passenger floor. The solar panel is to be installed at PDI for use while vehicles are stored on dealer lots. Refer to TSB 17-EE-001 for installation instructions.
This bulletin provides information for new software to update the navigation and display audio system to include the apple carplay and android auto feature. This bulletin describes how to transfer the update software to a storage drive (usb or sd card) and perform the software installation into the audio system.
Bestimmte Fahrzeuge der Modelljahre 2023 bis 2025 des Genesis GV60, der Modelljahre 2023 bis 2025 des Genesis GV70 Electrified und der Modelljahre 2023 bis 2025 des Genesis G80 Electrified benötigen möglicherweise den Austausch der integrierten Ladesteuereinheit (ICCU) und der ICCU-Sicherung. Bei Genesis verpflichten wir uns, Fahrzeuge von herausragender Qualität und hohem Wert anzubieten. Um dieser Verpflichtung gerecht zu werden, verlängert Genesis die Garantieabdeckung für den Austausch der ICCU und der ICCU-Sicherung unter dieser Bedingung auf 15 Jahre oder 180.000 Meilen ab dem Datum der ursprünglichen Auslieferung an den Endkunden bzw. dem Datum der ersten Nutzung. Diese Regelung gilt für den Erstbesitzer sowie für nachfolgende Besitzer.
Your vehicle may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is conducting a campaign to update the Central Control Panel (CCP) Software at NO CHARGE to you.
Certain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode.
Certain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode. This bulletin provides instructions to perform a software update for the CCP.
This bulletin provides a diagnostic and inspection procedure for addressing parking camera error conditions for G80 (RG3), GV70 (JK1/JK1A), and GV80 (JX1) vehicles. Follow the information in this TSB on the symptoms, causes, and associated diagnostic steps for camera issues based on the screen color and DTCs.
Certain GV70 Electrified (JK1A EV), GV60 (JW1 EV), and G80 Electrified (RG3 EV) vehicles may exhibit a condition while charging with a 240V AC (Level 2) charger where the vehicle experiences an interrupted charging session or a lower charging speed. This occurs to prevent potential damage to the charging cable connection. Follow the procedure in this TSB to update the software logic for the Vehicle Charging Management System (VCMS), which initiates a self-restart that allows the vehicle charging to return to full capacity once stabilized.
Certain 2022MY Genesis G80 (RG3) vehicles may exhibit a condition where the interior mood/ambient lamp color cannot be changed. This bulletin provides the service procedure to update the MLM (Mood Lamp Master) system software to resolve the condition stated above.
This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
This bulletin provides information related to the ECM(Engine Control Module) software update for G80/G90 with 5.0L GDI engine equipped vehicles. This updates the software logic dealing with OBD communication test.
This bulletin provides information related to an ECM (Engine Control Module) software update for OBD (On Board Diagnostics) logic improvement. The Fuel System Readiness settings logic has been updated.
If you are servicing a vehicle with a missing or damaged insulation cap from the EV Charging Port follow the information in this TSB to replace any missing/damaged insulation cap(s) on certain 2023-24MY GV60 (JW1 EV), G80 Electrified (RG3 EV) and GV70 Electrified (JK1a EV) vehicles. The charging insulation caps are important to ensure proper charger connector orientation and fit to the vehicle charge port.
This bulletin is issued to provide the extended battery diagnosis procedure using GDS. This battery diagnosis function displays the various battery-related faults such as: Internal short circuit Battery deterioration Malfunction of electronic parts Insufficient battery charge Normal battery Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.
This bulletin provides the procedure for updating the software of the Vehicle Charge Management System (VCMS) to improve charging. It may address an intermittent stops charging condition or the following EV Light On DTC condition: DTC P1ABD00 Battery Charger Coupler Temperature Too High
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).