Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Bestimmte Fahrzeuge GV70 Electrified (JK1A EV) und G80 Electrified (RG3 EV) können beim Einschalten des Bereitschaftsmodus („Ready“) eine fehlerhafte Warnleuchte mit den Fehlercodes (Diagnostic Trouble Codes, DTC) U151A8C und/oder U151B8C anzeigen. Dieses Service-Bulletin beschreibt das Verfahren zur Aktualisierung der Software des Fahrzeugsteuergeräts (Vehicle Control Unit, VCU), um diesen Zustand zu beheben.
Certain G80 (RG3) and G90 (RS4) vehicles equipped with the 2.5TGDI Theta III or 3.5TGDI Lambda III engine may experience reduced airconditioning performance due to a refrigerant leak originating at the Thermostatic Expansion Valve (TXV). This condition may be caused by improper installation of the liquid and suction pipe Orings at the TXV connection point. Technical Service Bulletin (TSB) 26-01-049G provides instructions to replace the TXV Orings at the liquid and suction pipe connections to correct the condition.
Certain G80 (RG3) and G90 (RS4) vehicles equipped with the 2.5TGDI Theta III or 3.5TGDI Lambda III engine may experience reduced airconditioning performance due to a refrigerant leak originating at the Thermostatic Expansion Valve (TXV).This condition may be caused by improper installation of the liquid and suction pipe Orings at the TXV connection point. This bulletin provides instructions to replace the TXV Orings at the liquid and suction pipe connections to correct the condition.
Certain 2021-2023MY GV80 (JX1), 2022-2023MY GV70 (JK1), 2021-2023MY G80 (RG3) and 2023MY G80 Electrified (RG3 EV) vehicles may exhibit a warning light with DTC C162078 due to improper detection of steel structures. Advanced Driver Assistance System (ADAS) functions are not affected due to this condition. Follow the procedure in this bulletin to update the front radar unit and perform all related adjustments according to shop manual.
Certain 2017 model year Genesis G80 and 2017 model year Genesis G90 vehicles may experience various Diagnostic Trouble Codes (DTC) related to the Airbag Control Unit (ACU), which may cause the airbag warning light to illuminate. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is extending the warranty coverage for the ACU under this condition to 15 years with unlimited mileage from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
Certain 2017MY G90 (HI) and 2017MY G80 (DH) vehicles may experience various Diagnostic Trouble Codes (DTC) related to the Airbag Control Unit (ACU). The associated DTC covered by the TSB are listed on page 3 of this bulletin. The airbag warning light may illuminate; however, airbag operation is unaffected. Hyundai is extending warranty coverage for the airbag control unit (ACU) under this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
Certain 2017MY G90 (HI) and 2017MY G80 (DH) vehicles may experience various Diagnostic Trouble Codes (DTC) related to and stored in the Airbag Control Unit (ACU). Genesis is extending warranty coverage for the airbag control unit (ACU) under this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
Certain 2017MY G90 (HI) and 2017MY G80 (DH) vehicles may experience various Diagnostic Trouble Codes (DTC) related to the Airbag Control Unit (ACU). The associated DTC covered by the TSB are listed on page 4 of this bulletin. The airbag warning light may illuminate; however, airbag operation is unaffected. Genesis is extending warranty coverage for the airbag control unit (ACU) under this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
Certain 2023-2025MY GV70 Electrified (JK1A EV), 2023-25MY GV60 (JW1 EV) and 2023-25MY G80 Electrified (RG3 EV) vehicles may exhibit a condition while driving where the 12V battery voltage drops below the operational voltage and the Vehicle Control Unit (VCU) places the vehicle in Limp Home mode. The VCU software in this bulletin updates the maximum vehicle speeds for various levels of 12V battery voltage when the vehicle enters Limp Home mode.
Certain 2021MY Genesis G80 (RG3) vehicles may have coolant leakage from the radiator reservoir tank. Follow the procedure outlined in this bulletin to inspect the radiator reservoir tank, and if necessary, replace it with a new part.
This bulletin describes the procedure to install an Audio Video Navigation (AVN) software update which repairs a condition in which the radio presets may reset during AVN start up.
This bulletin describes the procedure to inspect and repair brake pulsation on dealer stock vehicles only. The procedure described should be performed just prior to retail sale.
Some vehicles may exhibit door unlock malfunctions due to front bumper wiring and fuse disconnections following a collision, stemming from inadequate wiring protection during bumper impacts. This bulletin provides instructions to remove the front bumper and install the enhanced wiring protection measures.
Certain 2023-2024MY G80 Electrified (RG3 EV), 2023-2024MY GV60 (JW1 EV), and 2023-2024MY GV70 Electrified (JK1a EV) may have a condition of the power down warning light (turtle symbol) with "Power is limited" displayed in the cluster, and possible DTC P0A2F. If you are servicing a vehicle with either of these conditions, follow this bulletin to inspect the EOP.
This Vehicle Control Unit (VCU) software package includes the following key VCU updates: Brake light logic update for regenerative braking. o Revised logic to enable brake light actuation during regenerative braking at certain deceleration speeds and during i-Pedal mode driving without the need to press the brake pedal i-Pedal mode operation logic update. Revised i-Pedal operation logic. 12V battery saver logic update allows charging from EV Battery as low as 10% battery SOC (State of Charge) when vehicle is parked.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
This Vehicle Control Unit (VCU) software package includes the following key VCU updates: Brake light logic update for regenerative braking. o Revised logic to enable brake light actuation during regenerative braking at certain deceleration speeds and during i-Pedal mode driving without the need to press the brake pedal i-Pedal mode operation logic update. Revised i-Pedal operation logic. 12V battery saver logic update allows
This updated Vehicle Control Unit (VCU) software package includes the following: Brake light logic update for regenerative braking. i-Pedal mode operation logic update. 12V battery saver logic update allows charging from EV Battery as low as 10% SOC when parked.
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles.
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).