Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

GenesisGenesis G80

2016– · 2 generationen · 8 dokumentierte Mängel · 4 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
G80 II · 2020–
BulletinMittelMotorNA

Bulletin

Certain G80 (RG3) and G90 (RS4) vehicles equipped with the 2.5TGDI Theta III or 3.5TGDI Lambda III engine may experience reduced airconditioning performance due to a refrigerant leak originating at the Thermostatic Expansion Valve (TXV). This condition may be caused by improper installation of the liquid and suction pipe Orings at the TXV connection point. Technical Service Bulletin (TSB) 26-01-049G provides instructions to replace the TXV Orings at the liquid and suction pipe connections to correct the condition.

NHTSA · Herstellerbulletin11033843Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 II · 2020–
BulletinMittelMotorNA

Bulletin

Certain G80 (RG3) and G90 (RS4) vehicles equipped with the 2.5TGDI Theta III or 3.5TGDI Lambda III engine may experience reduced airconditioning performance due to a refrigerant leak originating at the Thermostatic Expansion Valve (TXV).This condition may be caused by improper installation of the liquid and suction pipe Orings at the TXV connection point. This bulletin provides instructions to replace the TXV Orings at the liquid and suction pipe connections to correct the condition.

NHTSA · Herstellerbulletin11033842Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 II · 2020–
BulletinMittelMotorNA

Bulletin

Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.

NHTSA · Herstellerbulletin10244964Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 II · 2020–
BulletinMittelMotorNA

Bulletin

Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.

NHTSA · Herstellerbulletin10230913Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 II · 2020–
BulletinMittelMotorNA

Bulletin

Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.

NHTSA · Herstellerbulletin10222084Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 I · 2016–2020
BulletinMittelMotorNA

Bulletin

On certain 2018MY G80 (DH) and G90 (HI) vehicles equipped with Lambda engines, the factory installed engine oil filler cap may have the incorrect text for engine oil viscosity printed on top.

NHTSA · Herstellerbulletin10165452Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 II · 2020–
BulletinGeringMotorNA

Bulletin

Bestimmte Fahrzeuge des Modelljahres 2026 G70 (IK) und des Modelljahres 2027 G80 (RG3) können beim Motorstart ein fließendes oder gluckerndes Geräusch aus den mittleren Frontlüftungsdüsen aufweisen. Diese Erscheinung kann durch im Motorkühlsystem eingeschlossene Luft verursacht werden. Führen Sie das folgende Verfahren aus, um das Kühlsystem ordnungsgemäß zu entlüften und die eingeschlossene Luft zu entfernen.

NHTSA · Herstellerbulletin11036094Modelljahre 2027Automatisch übersetzt · Original: EnglischDetails ansehen →
G80 II · 2020–
BulletinGeringMotorNA

Bulletin

Certain 2026MY G70 (IK) and 2027MY G80 (RG3) vehicles may exhibit a water-flowing or gurgling noise from the front center air vents during engine start-up. This condition may becaused by trapped air within the engine cooling system. Technical Service Bulletin (TSB) 26-01-064G provides instructions to properly bleed the cooling system and remove any trapped air.

NHTSA · Herstellerbulletin11036092Modelljahre 2027Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
G80 I · 2016–2020
BulletinGeringMotorNA

Bulletin

Genesis Motor America is conducting an Emissions Service Campaign to inspect, and if necessary, replace the oil cap on certain 2018MY G80 (DH) and G90 (HI) vehicles equipped with Lambda engines.

NHTSA · Herstellerbulletin10165454Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).