Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Infiniti EX I

2007–2013 · 4 dokumentierte Mängel · 4 Märkte

Diese Akte sammelt die bekannten Mängel des Infiniti EX I, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.

Halter melden bei diesem Auto häufig Probleme mit airbags (21 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit steering (16 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen

Schwerwiegendste Mängel

Alle ansehen (4) →
m
KritischInnenraumNA

Airbags: problems reported by owners

21 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2008–2012), typically at around 82,000 miles. Reported consequences: 3 crashes, 3 injuries.

✓ Mecafile-Auswertung amtlicher Daten2008–2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischFahrwerkNA

Steering column separation (US safety investigation)

NHTSA, the US road safety agency, opened a preliminary evaluation (PE14034) into this problem on 4 November 2014 for 2008 models; it was closed on 27 February 2015 without a recall.

✓ Mecafile-Auswertung amtlicher Daten2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
MittelFahrwerkNA

Steering: problems reported by owners

16 owners in the United States reported problems with the steering of this car to NHTSA (model years 2008–2013), typically at around 68,000 miles.

✓ Mecafile-Auswertung amtlicher Daten2008–2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Rückrufe

Alle ansehen (8) →
RückrufMittelFahrwerkNA

Steering

On certain vehicles, the steering column upper bearing retainer may fail due to a manufacturing defect. if this occurs, the upper bearing may experience additional stress causing excessive play in the steering wheel. This could result in vehicle instability and increase the risk of injury and/or damage to property. Correction: Dealers will replace steering shaft on EX35/FX35/45 and replace steering column assembly on GT-R.

Transport Canada11. Feb. 20152015060Modelljahre 2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischFahrwerkNA

Steering:Column

Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles equipped with the power tilt/telescope option included in the premium package, manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering.

NHTSA · USA2. Feb. 201515V054000Modelljahre 2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste technische Bulletins

Alle ansehen (34) →
BulletinGeringSonstigesNA

Bulletin

TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled and the TCU must be reset to re-enable the automatic collision notification function. Some models will store DTC B2E1B-97 for Automatic eCAll locked as CURRENT when this function is disabled. This bulletin describes how to reset the TCU after an automatic collision notification has been performed. For models with B2E1B-97 for Automatic eCAll locked set as CURRENT, complete the SERVICE PROCEDURE starting on page 2, and then erase DTCs after confirming the TCU condition is UNLOCK.

NHTSA · Herstellerbulletin11006966Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

BATTERY QUICK CHARGE NOTICE SERVICE INFORMATION When charging the vehicles 12 volt battery with the high amperage quick charge function, the ignition should never be ON, or turned ON, while charging. Attempting to start the vehicle, or turning the ignition ON, while using the high amperage quick charge could potentially damage the fuel pump control module. Only turn the ignition ON when either the ESM or a technical service bulletin service procedure states to do so, and only while using a battery maintainer or smart charger set to reflash mode, or a similar setting. Battery voltage should not exceed 16V during a reprograming operation.

NHTSA · Herstellerbulletin10208943Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

CLEANING FRONT OR REAR COMBINATION LAMP ASSEMBLIES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

NHTSA · Herstellerbulletin10206343Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).