Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Not applicable to vehicles built for US market. Park Lock Piston Leaking Customers may comment on the following: SYMPTOM: Power loss - jerking while driving that may result in the engine being unable to restart after a stop if fault code P0B0C 7A is present.
Turbocharger Oil Return Line Leak Customers may experience the following: Engine oil leak from the turbocharger oil return line This bulletin involves replacing the turbocharger oil return line.
"Engine Coolant Leak From Thermostatic Valve Gasket Customers may experience the following: Coolant is leaking at the thermostatic valve. This bulletin involves inspecting and, if necessary, replacing the thermostatic valve gasket."
"Engine Coolant Leak From Thermostatic valve Gasket Customers may experience the following: Coolant is leaking at the thermostatic valve. This bulletin involves inspecting and, if necessary, replacing the thermostatic valve gasket."
Kundenzufriedenheitsmitteilung T12 VECI-Etikett
Das Fahrzeugemissions-Kontrollinformations-Etikett (VECI-Etikett) bei etwa 120.000 der oben genannten Fahrzeuge enthält möglicherweise keine Emissionskontrollinformationen. Das VECI-Etikett wird häufig bei der Prüfung und Wartung im Betrieb (Inspection and Maintenance, I/M) verwendet, um die ordnungsgemäße Funktion emissionsrelevanter Bauteile zu überprüfen. Falsche Angaben auf dem VECI-Etikett könnten im Bundesstaat Kalifornien zur Verweigerung der Fahrzeugzulassung führen. Ein neues VECI-Etikett muss installiert werden.
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
The above vehicles are equipped with a saddle style fuel tank and may experience a condition where the transfer of fuel from the secondary side of the fuel tank to the primary side of the fuel tank is interrupted. This could cause the engine to stall without warning under certain driving conditions.
The above vehicles are equipped with a saddle style fuel tank and may experience a condition where the transfer of fuel from the secondary side of the fuel tank to the primary side of the fuel tank is interrupted. This could cause the engine to stall without warning under certain driving conditions.
Vehicle Emission Certification Information Label ersetzen
Dieses Bulletin betrifft den Austausch des Fahrzeug-Emissionszertifizierungs-Informationsschildes (VECI-Label).
Der Halter wird unter Umständen bei einer Prüfstelle für Inspektion und Wartung (IM-Prüfstelle) abgewiesen oder fällt bei der IM-Prüfung durch, da Emissionsbauteile auf dem VECI-Label fehlen. Der Kunde bemerkt möglicherweise, dass einige Angaben auf seinen VECI-Labels fehlen. Wenn in diesem Bereich Informationen angezeigt werden, ersetzen Sie das Label nicht.
Alle Fahrzeuge wurden mit den korrekt verbauten Emissionsbauteilen gefertigt, und es gibt keine Auswirkungen auf die Emissionsleistung oder das Fahrverhalten.
"Air Conditioning Not Blowing Cold Or Is Inoperative The customer or technician may describe or find one or more of the following: lAir conditioning provides insufficient cabin cooling. lAir conditioning is inoperative. This bulletin involves performing an inspection and possibly replacing the piping between expansion valve and connection to compressor piping."
"Fuel Odor or Difficult to Refuel Customers may experience one or more of the following: Difficult to refuel the vehicle. Fuel odor detected. This bulletin involves inspecting, and if necessary, properly connecting the fuel hose quick connects."
Fuel Rail Replacement Due to Cold Start and Loss of Pressure in the Fuel Line Customers may experience the following: Difficulty starting the vehicle in cold temperatures, during the first engine start of the day. This bulletin involves replacing the fuel rail due to loss of pressure in the fuel line.
Wenn kein Mopar-Ölfilter verfügbar ist, verwenden Sie einen Filter, der die Spezifikation USCAR36 erfüllt oder übertrifft und mit teil- und vollsynthetischen Motorölen kompatibel ist.
2.0L or 2.4L Engine Replacement This bulletin involves replacing the long block due to a crankshaft imbalance condition. These vehicles may exhibit a vibration in the engine.
2.0L or 2.4L Engine Replacement This bulletin involves replacing the long block due to a crankshaft imbalance condition. These vehicles may exhibit a vibration in the engine.
2.0L Or 2.4L Long Block Replacement This bulletin involves replacing the long block due to incorrect machining operation on the cylinder head. The customer may describe the engine is consuming oil.
2.0L Or 2.4L Engine Replacement This bulletin involves replacing the long block due to a crankshaft imbalance condition. These vehicles may exhibit a vibration in the engine.
Attention! Release Of New Engine Coolant Organic Additive Technology (OAT) Chrysler Corporation LLC. has released a new engine coolant for the 2013 model year vehicles and beyond, for all engine applications except the ones listed in the note above. This new coolant is an Organic Additive Technology (OAT) (Fig. 1). OAT coolants have a service interval of 10 years or 150,000 miles. For heavy duty truck and extreme duty cycle applications refer to the Service Information or Owner's Manual for proper maintenance schedules.
2.0L Or 2.4L Long Block Replacement This bulletin involves replacing the long block due to incorrect machining operation on the cylinder head. The customer may describe the engine is consuming oil.
2.0L Or 2.4L Long Block Replacement This bulletin involves replacing the long block due to incorrect machining operation on the cylinder head. The customer may describe the engine is consuming oil.
2.0L Or 2.4L Engine Replacement This bulletin involves replacing the long block due to a crankshaft imbalance condition. These vehicles may exhibit a vibration in the engine.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).