Bei den Carbon- und Keramikbremsen können die Edelstahlschrauben, mit denen die Bremsscheibe an der Metallglocke befestigt ist, durch Spannungsrisskorrosion versagen, wenn das Fahrzeug in Umgebungen mit hohem Salzgehalt eingesetzt wird. Wenn an einer Bremsscheibe mehr als acht der zehn Schrauben versagen, kommt es an diesem Rad zu einem Verlust der Bremsleistung. Dies könnte den Bremsweg geringfügig verlängern, was wiederum zu einer Kollision führen kann.
Bei Fahrzeugen mit Carbon-Keramik-Bremsen können die Edelstahlschrauben, mit denen die Bremsscheibe an der Metallglocke befestigt ist, durch Spannungsrisskorrosion versagen, wenn das Fahrzeug in extrem salzhaltiger Umgebung eingesetzt wurde. Der Kunde bemerkt ein Geräusch, wenn eine Schraube versagt, und die Bremse bleibt weiterhin zu 100 % wirksam. Würden jedoch bei der betroffenen Scheibe 8 der 10 Schrauben versagen, käme es an diesem Rad zu einem Bremsausfall. Obwohl das weltweit beobachtete Maximum an versagten Schrauben bei 3 lag, könnte das Problem theoretisch zu einem längeren Bremsweg und zu einer Kollision führen.
null In the case of persistent, severe load conditions, hydraulic fluid could leak from a high pressure pipe in the power steering system. Leaking fluid could touch hot engine areas resulting in the risk of fire.
As part of continuous product monitoring Automobili Lamborghini Spa has found that in rare cases of persistent severe load conditions and mechanical stress due to fluid pressure into the power steering system a little hole might develop in the pipe. This could result in a small fluid leakage.
Lamborghini is recalling certain model year 2004-2006 Gallardo Coupe and Spyder vehicles. In certain driving conditions, the high pressure steering pipes near the the steering assistance hydraulic system pump might leak.
On certain vehicles, the power steering high pressure line may develop a leak. Loss of steering fluid could cause a loss of steering power assist, which may result in a crash causing property damage and/or personal injury. Also, power steering fluid leakage may contact a hot engine or exhaust component, which could result in a fire. Correction: Dealers will replace the power steering high pressure line.
Transport Canada3. Sept. 20122012297Modelljahre 2004–2006Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles, the engine can be started without the clutch pedal being depressed. Should this occur while the transmission is in gear, the vehicle can lurch forward or back, depending which gear was selected. Such unintended movement could result in property damage, or cause the vehicle to strike a bystander, potentially resulting in personal injury or death. Correction: Dealers will install a clutch pedal switch assembly.
Transport Canada10. Apr. 20082008121Modelljahre 2006–2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, an engine software update may have been performed incorrectly. This could cause trouble codes to not be stored when the ignition key is turned off. If a fault was present, this could cause a warning lamp not to light up the next time the engine is started. Safety Risk: A warning lamp that does not turn on may not provide a driver with important information about vehicle safety systems. This could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the engine software. Note: This is an expansion of recall 2018-662.
Transport Canada2. Juli 20192019328Modelljahre 2011–2014Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
엔진 컨트롤 유닛(ECU) 소프트웨어 프로그램 입력 작업 오류로 인하여, 경고등 고장 정보저장 기능에 오류가 발생할 수 있는 가능성에 따른 리콜
Gallardo Coupe: 2010.08.27~2013.09.06
Gallardo Spyder: 2010.07.13~2013.07.29
MOLIT · Südkorea10. Mai 20193095Modelljahre 2010–2013Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On one vehicle, an engine software update may have been performed incorrectly, causing diagnostic trouble codes to not be stored when the ignition key is turned off. If a fault was present, this could cause the warning lamp not to light when the engine is next started. This could create a situation where the driver is not provided with important information about vehicle safety systems, which may increase the risk of a crash causing injury and/or property damage. Correction: Dealers will update the engine software. Note: This recall is superseded by recall 2019328. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019328">recall 2019328</a> for more information.
Transport Canada29. Nov. 20182018662Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Automobili Lamborghini (Lamborghini) is recalling certain 2011-2014 Gallardo Coupe and Gallardo Spyder vehicles. The Engine Control Unit (ECU) software may erase trouble codes after the ignition is turned off, not illuminating warning lamps and preventing drivers from being warned of safety system problems the next time that they are driving.
Bei bestimmten Fahrzeugen können die Befestigungsschrauben der Bremsscheibe versagen. Dies kann zu einer verminderten Bremsleistung führen, wodurch sich der Bremsweg verlängern und das Risiko eines Unfalls mit Verletzungen und/oder Sachschäden steigen kann. Abhilfe: Händler ersetzen die Schrauben durch eine überarbeitete Ausführung.
Automobili Lamborghini America LLC (Lamborghini) ruft bestimmte Gallardo Coupés und Spyders der Modelljahre 2007 bis 2009 zurück, die mit Carbon-Keramik-Bremsscheiben ausgestattet sind. Die Edelstahlschrauben, mit denen die Bremsscheiben befestigt sind, können nach Einwirkung salzhaltiger Bedingungen versagen.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).