Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Am 20. Dezember 2022 genehmigte das Bundesgericht einen Vergleich über Ansprüche im Zusammenhang mit bestimmten Kraftstoffniederdruckpumpen. Der Vergleich beinhaltet die Zusage von Lexus, ein Kundenunterstützungsprogramm für bestimmte Fahrzeuge der Modelljahre 2013–2020 (MY) bereitzustellen, die ursprünglich mit Kraftstoffniederdruckpumpen ausgestattet waren, die im Rahmen der Sicherheitsrückrufaktion 20LA01 oder der Sonderservicekampagne 21LC01 repariert wurden. Ziel dieses Schreibens zum Kundenunterstützungsprogramm ist es, die Umsetzung dieses Leistungsumfangs gemäß dem Vergleich verständlich zu machen.
TSB: Some 2013 ? 2020 model year Lexus vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions.
Dies dient dazu, verschiedene Preisänderungen zu informieren, die Genuine Lexus Motor Oil und Long-Life Coolant betreffen, wirksam ab dem 1. März 2023. Diese Produkte werden über die Website von Lexus Complete Maintenance Care (LCMC) bestellt.
DP: The subject vehicles may have been equipped with an engine containing an incorrectly manufactured Crankcase Case Vent. If the engine is equipped with an incorrectly manufactured Crankcase Case Vent, the vehicle may release crankcase emissions.
TT: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: ? MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. ? Intermittently runs rough after coming to a stop with the engine at operating temperature. ? Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.
TT: TMS has discovered the current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS or 8AR-FTS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. In order to avoid this condition, technicians should raise engine RPM when changing from Direct Injection active test to Port Injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2GR-FKS or 8AR-FTS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. intermittently runs rough with engine misfires present after a cold soak startup.
Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 Intermittently runs rough after coming to a stop with the engine at operating temperature Intermittently runs rough with engine misfires present after a cold soak startup
Tech Tip: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.
"tt: Tms has discovered the current engine active test control the injection mode is not operating as desired when controlling the direct injectors manually on 2gr-fks or 8ar-fts engines. When direct injection is started and then stopped using the active test, current ecu logic does not turn off the direct injectors and can cause dtcs p017200, p017500 and p0160300. In order to avoid this condition, technicians should raise engine rpm when changing from direct injection active test to port injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2gr-fks or 8ar-fts equipped vehicles. Note: If the active test is used multiple times without using this procedure to raise engine rpm, it may be necessary to reset learning values for fuel trim and air to fuel ratio before returning vehicle to customer."
"tt: Some is250 and gs300 vehicles may exhibit one or more of the following conditions: Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305, and/or p0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. Note: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis."
Lexus: Some vehicles may exhibit a mil on condition with one or more of the following diagnostic trouble codes (dtcs): P0300, p0301, p0302, p0303, p0304, p0305, and p0306-random misfire detected; cylinder 1-6 misfire detected. This condition is not not dependent on engine temperature or initial engine run time. *pe
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).