**Problem:** Bei bestimmten Fahrzeugen kann die langfristige Einwirkung hoher absoluter Luftfeuchtigkeit und Temperatur in Verbindung mit starken Temperaturwechseln die Treibladung des Beifahrerairbags mit der Zeit zersetzen. Dadurch könnte sich der Airbag mit größerer Kraft als normal auslösen. Wenn der Gasgenerator des Airbags birst, könnten Splitter in Richtung der Fahrzeuginsassen geschleudert werden oder die Airbageinheit beschädigt werden, sodass sie nicht mehr ordnungsgemäß funktioniert.
**Sicherheitsrisiko:** Wenn das Fahrzeug in einen Unfall verwickelt wird, bei dem der Airbag auslösen muss, könnte der Gasgenerator bersten und ein Verletzungsrisiko entstehen.
**Abhilfemaßnahme:** Die Halter werden per Post benachrichtigt und aufgefordert, ihr Fahrzeug zu einem Händler zu bringen, wo der Gasgenerator des Beifahrerairbags oder das Airbagmodul ersetzt wird.
**Hinweis:** Das kanadische Klima führt dazu, dass sich die Treibladung langsam zersetzt. Diese Rückrufaktion erfolgt vorsorglich, um einem künftigen Risiko vorzubeugen. Es wird erwartet, dass alle Airbag-Gasgeneratoren ersetzt werden, bevor ihre Funktion beeinträchtigt wird.
**Zusätzlicher Hinweis:** Bei manchen Fahrzeugen wurde der ursprüngliche Gasgenerator des Beifahrerairbags im Rahmen der Rückrufaktion 2016-103 (Toyota Recall #'s SRC 241 & SRC 242) als „Like-for-Like“-Ersatz ausgetauscht, als vorübergehende Maßnahme, bis eine dauerhafte Lösung entwickelt ist. Diese Fahrzeuge erhalten im Rahmen dieser Rückrufaktion die dauerhafte Lösung, also eine neue Beifahrer-Airbageinheit.
Toyota Motor Engineering & Manufacturing (Toyota) ruft bestimmte 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Siena, 2008-2012 Scion xB zurück, 2008-2009 Lexus IS-F, 2007-2012 Yaris und Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 und IS350 sowie 2010-2015 Lexus IS250C und IS350C Fahrzeuge. Diese Fahrzeuge hatten ihre Fahrer- oder Beifahrer-Frontairbag-Inflatoren bereits im Rahmen eines früheren Rückrufs mit Inflatoren desselben Designs ersetzt. Die Inflatoren können durch den Treibstoffabbau nach langfristiger Exposition gegenüber hoher absoluter Luftfeuchtigkeit, Temperatur und Temperaturschwankungen explodieren.
Bei dem Gasgenerator (Inflator) des Airbags auf der Beifahrerseite kann der Gaserzeugungsstoff aufgrund unzureichenden Feuchtigkeitsschutzes durch wiederholte Temperatur- und Feuchtigkeitsschwankungen degradieren. Dadurch besteht die Gefahr, dass der Inflatorbehälter beim Auslösen des Airbags beschädigt wird.
Bei bestimmten Fahrzeugen könnte eine langfristige Einwirkung hoher absoluter Luftfeuchtigkeit und Temperatur in Verbindung mit starken Temperaturwechseln das Treibmittel des Frontairbags auf der Beifahrerseite mit der Zeit zersetzen. Dadurch könnte sich der Airbag mit größerer Kraft als üblich entfalten. Wenn das Fahrzeug dann in eine Kollision verwickelt würde, bei der eine Auslösung des Airbags erforderlich ist, könnten Bruchstücke in Richtung der Fahrzeuginsassen geschleudert werden, und die Airbageinheit könnte beschädigt werden, sodass sie nicht mehr ordnungsgemäß funktioniert. Diese Probleme könnten das Verletzungsrisiko erhöhen. Korrektur: Die Händler tauschen den Gasgenerator des Frontairbags auf der Beifahrerseite oder die komplette Airbageinheit aus.
<br><br>
Hinweis: Das kanadische Klima führt dazu, dass sich das Treibmittel nur langsam zersetzt. Die Rückrufaktion erfolgt vorsorglich, um einem künftigen Risiko vorzubeugen, und es ist vorgesehen, die Airbag-Gasgeneratoren auszutauschen, bevor ihre Funktion beeinträchtigt wird. Bei manchen Fahrzeugen wurde der ursprüngliche Gasgenerator des Frontairbags auf der Beifahrerseite im Rahmen des Rückrufs 2013-133 (Toyota-Rückrufnummern SSC 193/241 und SSC 194/242) möglicherweise durch einen gleichwertigen Ersatz getauscht, als vorübergehende Abhilfe, während eine dauerhafte Lösung geprüft wird. Diese Fahrzeuge erhalten im Rahmen dieser Rückrufaktion die dauerhafte Lösung in Form einer kompletten Airbageinheit auf der Beifahrerseite.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2005 Lexus SC and Toyota Sequoia, 2003-2005 Toyota Corolla and Tundra, and 2003-2007 Pontiac Vibe vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured May 25, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles manufactured June 1, 2007, to January 2, 2008. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
NHTSA · USA3. März 201616V127000Modelljahre 2008–2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: All vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For Matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.
Transport Canada2. März 20162016103Modelljahre 2002–2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured June 1, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles manufactured June 1, 2007, to January 2, 2008 that were originally sold, or ever registered, in Florida, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan, American Samoa, Georgia, Alabama, Louisiana, Mississippi and Texas. The affected vehicles have a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture upon its deployment.
NHTSA · USA2. März 201616V128000Modelljahre 2008–2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>
Transport Canada17. Juni 20152015269Modelljahre 2002–2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015, that they are recalling 2005-2007 Lexus SC, Toyota Corolla, Corolla Matrix, Sequoia, and Pontiac Vibe, and 2005-2006 Toyota Tundra vehicles that were originally sold, or ever registered, in Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. On June 16, 2015 Toyota expanded the recall to cover an additional 769,055 vehicles, including certain model year 2002-2004 Lexus SC, Toyota Sequoia, 2003-2004 Toyota Corolla Matrix, Toyota Corolla, Pontiac Vibe, and Toyota Tundra vehicles, as well the vehicles covered by the May 13, 2015 notification in the portions of Georgia, Alabama, Louisiana, Mississippi and Texas that were not previously included. The inflators in the front passenger air bags are susceptible to rupture in the event of a crash necessitating the deployment of the front passenger air bag.
NHTSA · USA13. Mai 201515V286000Modelljahre 2002–2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015 that they are recalling certain model year 2004 Sequoia vehicles manufactured August 18, 2003, to August 19, 2004, and 2003-2004 Tundra vehicles manufactured March 18, 2003, to August 25, 2004. On June 16, 2015, Toyota expanded the recall to include an additional 1,270,468 vehicles, including model year 2002-2003 and 2005-2007 Sequoia, 2005-2006 Tundra, 2003-2007 Corolla, 2003-2007 Corolla Matrix, 2003-2007 Pontiac Vibe and 2002-2007 Lexus SC vehicles. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
NHTSA · USA13. Mai 201515V285000Modelljahre 2002–2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>
Transport Canada12. Juni 20142014224Modelljahre 2002–2003Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>
Transport Canada11. Apr. 20132013113Modelljahre 2002–2003Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
De ontsteker van de voorste passagiersairbag kan, na eerder te zijn vervangen, bij het activeren nog een te hoge druk opbouwen. Hierdoor kan de ontsteker scheuren, de behuizing beschadigen en kunnen metaaldeeltjes losraken en wegschieten.
Bij het activeren van de voorste passagiersairbag kan in de gasontsteker een te hoge druk worden opgebouwd. Hierdoor kan de behuizing beschadigen en kunnen metaaldeeltjes losraken en wegschieten.
조수석 에어백 인플레이터 내의 추진체 불량으로 에어백이 정상적으로 작동되지 않을 가능성이 발견되어 안전운행에 지장을 줄 수 있는 가능성에 따른 리콜
MOLIT · Südkorea22. Aug. 20131296Modelljahre 2001–2003Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).