Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda CX-50

2022– · 1 generationen · 7 dokumentierte Mängel · 1 Märkte
Generationen
Alle GenerationenCX-502022–77271

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
BulletinMittelElektrikNA

Bulletin

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-037/26 05/28/26 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models.

NHTSA · Herstellerbulletin11034440Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-049/25 10/16/2025 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models. In addition to the procedures outlined in the Workshop Manual, please follow these additional steps when removing an existing label to help simplify the application of the new one:

NHTSA · Herstellerbulletin11033443Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

HYBRID SYSTEM FAILURE DISPLAYED ON METER WITH DTC P2530:12 This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 30-001/26 02/19/26 and 03/24/26 This technical service bulletin has been superseded to SSPE0. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions.

NHTSA · Herstellerbulletin11032007Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

**Betreff:** Benachrichtigung über das Special Service Program (SSPE0) – 2025 CX-50 Hybrid – Störung des Hybridsystems wird im Kombiinstrument angezeigt (DTC P2530:12) Sehr geehrte Kolleginnen und Kollegen des Mazda-Händlernetzes, die Mazda Motor Corporation hat beschlossen, bei bestimmten 2025 CX-50 Hybrid Fahrzeugen ein Special Service Program durchzuführen. **Problembeschreibung:** Beim Starten des Fahrzeugs kann die Hauptwarnleuchte aufleuchten und im Kombiinstrument kann die Meldung einer Störung des Hybridsystems („Hybrid System Malfunction Have the Vehicle Inspected“) angezeigt werden. Das Hybridsystem wird unter Umständen nicht aktiviert, und der Motor startet möglicherweise nicht. Zusätzlich treten der DTC P2530:12 [Hybrid Control] sowie zahlreiche weitere DTCs auf. **Reparaturbeschreibung:** Das PT_GWU muss mit dem Mazda Modular Diagnostic System (M-MDS) unter Verwendung der Mazda Diagnostic And Repair Software (MDARS) neu programmiert werden. Dabei sind die Reparaturanweisungen aus TSB 30-001/26 zu befolgen. **MASSNAHME – AUSLIEFERUNG STOPPEN:** Alle Fahrzeugtypen im Händlerbestand – Neuwagen, Certified Pre-Owned oder Gebrauchtwagen – dürfen verkauft, aber erst nach erfolgter Reparatur ausgeliefert werden. Im Händlerbestand und/oder auf dem Weg zu den Händlern befinden sich ca. 50 Neufahrzeuge. Alle betroffenen Fahrzeuge im Bestand müssen vor der Auslieferung im Rahmen dieses SSP repariert werden. Die Anzahl der betroffenen Fahrzeuge bei Ihrem Autohaus finden Sie in Inventory & Sales 2.0 in eMDCS. Die VIN-Liste (über das interne MNAO-Kampagnenreporting) wird Ihrem District Service Manager bis spätestens 24. März 2026, 17:00 Uhr (Pacific Time) bereitgestellt. **Information der Halter:** Mazda benachrichtigt die Halter betroffener Fahrzeuge spätestens bis zum 24. April 2026, gegebenenfalls auch früher. Ab dem 24. März 2026 werden die Fahrzeuge in eMDCS als „Open“ angezeigt, und alle Fahrzeuge können sofort repariert werden.

NHTSA · Herstellerbulletin11030704Modelljahre 2025Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.

NHTSA · Herstellerbulletin11030703Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.

NHTSA · Herstellerbulletin11030702Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

DESCRIPTION Hybrid system failure displayed on meter with DTC P2530:12. (This TSB has been superseded to SSPE0). REPAIR PROCEDURE 1. Verify the customer concern. 2. Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS). Refer to MDARS ECU Reprogramming Procedure. WARNING: During module reprogramming, the engine cooling fan may turn on and off automatically. Keep hands, tools, and any objects clear of the cooling fan and other moving components in the engine bay during the reprogramming procedure. NOTE: Be sure to submit Diagnostic Information (ODR) data as it is a required item and will be checked during warranty claim submission. Instructions can be found under M-MDS -> MDARS (Uploading Diagnostic Information (ODR) Data). 3. Clear any other DTC. 4. Verify the repair by starting the engine (READY ON) and confirming there is no CHECK ENGINE light ON or abnormal warning lights present.

NHTSA · Herstellerbulletin11030604Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Key Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life. NOTE: Some customers may complain about an engine no start. This may be caused by the customer inadvertently putting the key transmitter in Power Saving Function.

NHTSA · Herstellerbulletin11013788Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.

NHTSA · Herstellerbulletin11007019Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.

NHTSA · Herstellerbulletin11007018Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some customers may experience the master warning light and/or the "In-Vehicle Network Malfunction" warning message in the instrument cluster on with DTC B119F:01 (TCU - Tel antenna No. 1 malfunction) stored.

NHTSA · Herstellerbulletin11003361Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some customers may experience the following symptoms of the wireless charger (Qi), even when the mobile device (smartphone etc.) is placed in the proper position on the wireless charger (Qi). - It does not start charging. - Soon after starting, it stops charging with the indicator flashing in red. - Soon after starting, it stops charging without any visible sign. These symptoms may be caused by improper control software of the wireless charger (Qi). To eliminate these concerns, the specification of the wireless charger (Qi) has been modified. NOTE: The modifications for the symptoms are different depending on the model.

NHTSA · Herstellerbulletin10248386Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some customers may experience the following symptoms of the wireless charger (Qi), even when the mobile device (smartphone etc.) is placed in the proper position on the wireless charger (Qi). - It does not start charging. - Soon after starting, it stops charging with the indicator flashing in red. - Soon after starting, it stops charging without any visible sign. These symptoms may be caused by improper control software of the wireless charger (Qi). To eliminate these concerns, the specification of the wireless charger (Qi) has been modified. NOTE: The modifications for the symptoms are different depending on the model.

NHTSA · Herstellerbulletin10243549Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some customers may experience the following: In-Vehicle Network Malfunction error message, Master Warning light ON, Connected Vehicle Reception Icon shows "X".

NHTSA · Herstellerbulletin10240495Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.

NHTSA · Herstellerbulletin10238697Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

In-vehicle network malfunction and master warning light on. Dtc u3000:04 stored (does not apply to 09-001/23)

NHTSA · Herstellerbulletin10238692Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.

NHTSA · Herstellerbulletin10237216Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

CX-50 7-Way Trailer Hitch Harness Instructions. When installing CX-50 7-way trailer hitch harness, please make sure to use the newly updated installation instructions designated for part numbers VA41V7780A/VAS1V7780A. If the incorrect instruction printout is included with the parts, please discard it.

NHTSA · Herstellerbulletin10235581Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles may exhibit the "Check Fuel-filler Cap" message displayed in the instrument cluster. This is caused by improper control software of the PCM. When the room fuse is installed and i-stop is activated, the message will display in the instrument cluster for three seconds only one time and no message will return. To eliminate this concern, the control software of the PCM has been modified.

NHTSA · Herstellerbulletin10225782Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles may exhibit the Check Fuel-filler Cap message displayed in the instrument cluster. This is caused by improper control software of the PCM. When the room fuse is installed and i-stop is activated, the message will display in the instrument cluster for three seconds only one time and no message will return. To eliminate this concern, the control software of the PCM has been modified.

NHTSA · Herstellerbulletin10218734Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack.

NHTSA · Herstellerbulletin11025003Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

If all keys are lost and the technician is attempting to scan a vechile without ignition on, two options can be used to scan the vehicle: a PCM software number is requested in MDARS and must be inputted or ID another CX-50 and check the PCM in the network screen.

NHTSA · Herstellerbulletin11025000Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7230C1A-NA01_10014). NOTE: If current version is not 7230C1A-NA01_*****, this TSB is not applicable. (Ver. 7230C1A-NA01_10014) fixes these software errors (bugs): The banner display for battery level notifications of Bluetooth-connected devices has been modified. Alexa may sign out when deleting a driver with a set-up Alexa. Backup and restore may fail in the factory service diagnostics. The screen may not clear even after a few seconds while connected to a Wi-Fi client. The system may freeze on the disclaimer screen when the engine is started normally after using the remote engine starter. When attempting to connect Android Auto, only Bluetooth connection is established. Air conditioning settings cannot be controlled via Alexa without a connected vehicle (CV) contract. The infotainment screen turns black when SiriusXM radio is selected. The camera images on the infotainment screen are not affected, the back camera is usable. (Ver. 7230C1A-NA01_10012) fixes these software errors (bugs): CarPlay wireless connection may fail. The Wi-Fi client menu cannot be selected when the in-vehicle communication device is out of range. The smartphone may not be charged when a smartphone is connected to a USB port while connected to wireless CarPlay. Navigation guidance may be displayed in Active Driving Display and/or the center display even when the SD card has been removed. After deleting multiple destinations, pressing the commander may sometimes fail to display the menu.

NHTSA · Herstellerbulletin11024836Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.

NHTSA · Herstellerbulletin11020036Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps): CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a batterys Cold Cranking Amps. CCA rated batteries are supplied with domestically produced vehicles. NOTE: If an incorrect CCA rating is entered into the Mazda DCA-8000, it will result

NHTSA · Herstellerbulletin11020035Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).