Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 05/27/26, 04/20/26, 04/09/26, 03/25/26 and 03/13/26 DESCRIPTION Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 DTC U0156:00 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) During a Bluetooth phone call, tapping the navigation icon does not launch Google Maps During an Apple CarPlay phone call, the Climate Control fullscreen menu cannot be accessed While the Climate Control screen is displayed in full screen, tapping the Apple CarPlay icon does not launch Apple CarPlay
Diese Service-Alarmmeldung ersetzt die zuvor herausgegebenen, unten aufgeführten Service-Alarmmeldungen: Die Änderungen sind in Rot gekennzeichnet. Infotainment-Neustart bei installierter Navigationskarte. Diese Serviceinformation ist nicht mehr gültig. Bitte beachten Sie stattdessen die folgenden aktualisierten Technischen Service-Bulletins: CX-5 / CX-9: 16-002/23 - AKTUALISIERTE SOFTWAREVERSION BEI PROBLEMEN MIT DEM MAZDA CONNECT INFOTAINMENTSYSTEM (7. GENERATION TYP). Mazda3 / CX-30 (Non-Turbo): 16-008/23 - AKTUALISIERTE SOFTWAREVERSION BEI PROBLEMEN MIT DEM MAZDA CONNECT INFOTAINMENTSYSTEM. Mazda3 / CX-30 (Turbo): 16-007/23 - AKTUALISIERTE SOFTWAREVERSION BEI PROBLEMEN MIT DEM MAZDA CONNECT INFOTAINMENTSYSTEM.
Infotaintment center display and connected vehicle improper operation. This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 04/20/26, 04/09/26, 03/25/26 and 03/13/26 DESCRIPTION Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 DTC U0156:00 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) During a Bluetooth phone call, tapping the navigation icon does not launch Google Maps During an Apple CarPlay phone call, the Climate Control fullscreen menu cannot be accessed While the Climate Control screen is displayed in full screen, tapping the Apple CarPlay icon does not launch Apple CarPlay
SA-015/26 - INFOTAINMENT CENTER DISPLAY AND CONNECTED VEHICLE IMPROPER OPERATION This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 04/09/26 and 03/25/26 and 03/13/26 Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) During a Bluetooth phone call, tapping the navigation icon does not launch Google Maps During an Apple CarPlay phone call, the Climate Control fullscreen menu cannot be accessed While the Climate Control screen is displayed in full screen, tapping the Apple CarPlay icon does not launch Apple CarPlay REPAIR PROCEDURE simplified and updated recovery instructions Recovery - Turn off the vehicle and allow it to fully power down to sleep mode Turn off, exit, and lock the vehicle, let it sit for 5+ mins If the Recovery procedure above does not resolve the issue, perform the following: Disconnect the 12V battery negative cable. Wait 10+ minutes. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the condition and is working on a resolution. Vehicle driving operation is not affected during these conditions. No repairs or component replacements should be attempted at this time. The vehicle may be released to the customer.
SA-015/26 - INFOTAINMENT CENTER DISPLAY AND CONNECTED VEHICLE IMPROPER OPERATION This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 03/25/26 and 03/13/26 Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) REPAIR PROCEDURE simplified and updated recovery instructions Recovery - Turn off the vehicle and allow it to fully power down to sleep mode Turn off, exit, and lock the vehicle, let it sit for 5+ mins If the Recovery procedure above does not resolve the issue, perform the following: Disconnect the 12V battery negative cable. Wait 10+ minutes. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the condition and is working on a resolution. Vehicle driving operation is not affected during these conditions. No repairs or component replacements should be attempted at this time. The vehicle may be released to the customer.
DESCRIPTION The 2026 CX-5 has new and revised features that are different from previous models and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. Symptom Service Alert Intermittent Globe with a slash icon Beep sound near the SOS button SOS button amber or red LED Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Communication error with cockpit domain controller (CDC)(Ethernet) SA-015/26 Incorrect Sign in to network notification, even though the customer has signed in to the network correctly SA-016/26 Intermittent loss of the MyMazda App remote function SA-017/26 Apple CarPlay/Android Auto does not connect by wireless or USB connection SA-018/26
Dieses Bulletin ersetzt das/die zuvor herausgegebene(n) Bulletin(s), die unten aufgeführt sind. Die Änderungen sind unten in Rot gekennzeichnet.
01-007/24 06/20/24 MOTORÖLSTANDSWARNLEUCHTE AN MIT DTC P250F:00 AUFGRUND NIEDRIGEN MOTORÖLSTANDS (AKTUALISIERT MIT SSPD5-INFORMATIONEN). Alle Mazda Händler: Folgen Sie dem Sonderservice-Programm SSPD5 Valve Stem Seal Class Action, um festzustellen, ob die Ventilschaftdichtungen ersetzt werden sollten.
1. Überprüfen Sie das Kundenanliegen gemäß dem Sonderservice-Programm SSPD5 Reparaturverfahren. Wie im Reparaturverfahren SSPD5 beschrieben, bestätigen Sie, dass das Motoröl nicht aus dem Motor austritt. Meldet der Kunde bei der Ankunft beim Händler, dass der Motorölstand niedrig ist, ersetzen Sie die Ventilschaftdichtungen gemäß dem Ablaufdiagramm für SSPD5. Ist der Motorölstand bei der Ankunft niedrig, ohne dass der Kunde eine Beanstandung vorbringt, prüfen Sie auf SSPD5, und wenn die Ventilschaftdichtungen im Rahmen einer früheren Garantie nicht ersetzt wurden, ersetzen Sie die Dichtungen. Wurden die Ventilschaftdichtungen im Rahmen einer früheren Garantieforderung ersetzt, wenden Sie sich für weitere Anweisungen an die Hotline. Müssen die Ventilschaftdichtungen ersetzt werden, ersetzen Sie die Ventilschaftdichtungen auf der Auslassseite durch verbesserte Ausführungen unter Verwendung der in den unten aufgeführten Reparaturverfahren genannten Spezialwerkzeuge.
2. Motoröl nachfüllen (falls erforderlich). HINWEIS: Motoröl sollte nicht nachgefüllt werden, ohne die Ventilschaftdichtungen zu ersetzen.
3. Überprüfen Sie die Reparatur. HINWEIS: Wenn Sie bei einem Kundenbesuch wegen Ölverbrauchs im Zusammenhang mit SSPD5 unsicher sind, welche Schritte zu unternehmen sind, füllen Sie die Dealer Recall Help auf OneMazda aus.
Some customers may experience the following symptoms of the wireless charger (Qi), even when the mobile device (smartphone etc.) is placed in the proper position on the wireless charger (Qi). It does not start charging. It stops charging with the indicator flashing in red after starting. It stops charging without any visible sign after starting. For CX-50, some customers may experience that despite placing the MagSafe-equipped iPhone at the center of the wireless charger, charging stops after about ten seconds. MagSafe-equipped iPhones use magnets to align the charger and the device. When charging MagSafe-equipped iPhones with a non-MagSafe compatible charger, improper alignment can cause the magnetic field required for charging to be disrupted by the magnets, significantly reducing charging efficiency.
Some customers may experience the following symptoms of the wireless charger (Qi), even when the mobile device (smartphone etc.) is placed in the proper position on the wireless charger (Qi). - It does not start charging. - Soon after starting, it stops charging with the indicator flashing in red. - Soon after starting, it stops charging without any visible sign. These symptoms may be caused by improper control software of the wireless charger (Qi). To eliminate these concerns, the specification of the wireless charger (Qi) has been modified. NOTE: The modifications for the symptoms are different depending on the model.
Some vehicles may have a "LOW ENGINE OIL LEVEL" warning message and an engine oil level warning light on in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. - DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
There is a SCR/ AWD harness that has a unique routing, over the SCR tank cover. Over time, contamination (i.e. sand, dirt) on the SCR/AWD harness may cause wear on the harness wiring and insulation due to vibration of the SCR tank cover. In the worst-case scenario, the electrical circuits in the wiring harness can be disconnected with the MIL/SCR/4WD warning lights illuminating. Inspect the SCR/AWD harness for signs of damage. If the CORE WIRES inside the harness have no damage, protective shrink tubing will be installed on the harness. If CORE WIRE damage is found in the harness, the harness will be repaired with supporting parts.
Connected vehicle remote functions inoperative and/or engine no start due to low battery voltage. Some customers may experience the following symptoms: Connected Vehicle Remote Functions inoperative after SSPC6 repair. Connected Vehicle Remote Functions inoperative on vehicles built March 20, 2021 and later.
Connected vehicle remote functions inoperative and/or engine no start due to low battery voltage. Some customers may experience the following symptoms: Connected Vehicle Remote Functions inoperative after SSPC6 repair. Connected Vehicle Remote Functions inoperative on vehicles built July 1, 2021 and later.
Connected vehicle remote functions inoperative and/or engine no start due to low battery voltage. Some customers may experience the following symptoms: Connected Vehicle Remote Functions inoperative after SSPC6 repair. Connected Vehicle Remote Functions inoperative on vehicles built July 1, 2021 and later.
Some customers may experience the following symptoms: Connected Vehicle Remote Functions inoperative after SSPC6 repair. Connected Vehicle Remote Functions inoperative on vehicles built July 1, 2021 and later. Engine no start due to low battery voltage.
Some customers may experience an engine no start due to low battery voltage. Mazda is aware of the issue and is working on a solution. NOTE: Battery parasitic draw is intermittent. When the condition is present, battery parasitic draw exceeds 65 mA (0.065 A) 40 minutes after key OFF.
Some customers may experience an engine no start due to low battery voltage. Mazda is aware of the issue and is working on a solution. NOTE: Battery parasitic draw is intermittent. When the condition is present, battery parasitic draw exceeds 65 mA (0.065 A) 40 minutes after key OFF. Contact Hotline for latest repair information.
Fctry MESSASGE DISPLAYED after instrument cluster replacement. After the installation of a new instrument cluster, the message "Fctry" is displayed instead of the odometer. Some new instrument clusters are in the factory mode setting. Factory mode cancellation is required.
If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
INTERIOR LIGHTING KIT (ILK) INSTALLATION UPDATE. Due to a manufacturing change on the 2020 CX-5, there is an update in the installation instructions that will be reflected in the next printing. The new instructions will have a suffix A Part Number. If the instructions do not have a suffix "A",install the ILK per the instructions until page 32, step 3, and then following the instructions below.
SiriusXM Traffic Plus and Travel Link are displayed with Mazda in-vehicle factory navigation systems. Both of these services provide information in the U.S. & Canada. NOTE: SiriusXM Traffic Plus and Travel Link subscription is free of charge for 3 years only if equipped with factory installed navigation system. NOTE: 2019 Mazda3 is not equipped with factory installed navigation system, however, it is available as a dealer installed accessory. SiriusXM Traffic Plus and Travel Link are available on the 2019 Mazda3 Preferred Package and above, as a paid subscription. Traffic Plus feature requires in-vehicle navigation SD card. SiriusXM Satellite Radio trial subscription is free of charge for 3 months.
Some vehicles may experience a check engine light on with DTC P0524 stored in the PCM memory. It is accompanied by a master warning indication/warning light illumination, engine oil pressure indication/engine oil warning light illumination. DTC P0524:00: Engine oil pressure too low. Due to improper PCM control logic, the engine oil valve may not work quickly enough under certain situations, resulting in the engine oil pressure increasing slower than usual. To eliminate this concern, the PCM software has been modified.
Some 2018 vehicles built after January 1, 2018 and equipped with Navigation may exhibit one of these concerns after the user inputs an address: A screen pops up that says "House number not found." After the user selects OK, the system finds the address or a nearby address.Instead of finding the correct address number the system adds a digit to the end of the number. Example: You enter 151 and the system comes back with 1510, 1511, 1515, 1516, etc. This only occurs with MAZDA CONNECT software version 59.00.532 or 59.00.540, which started being installed into vehicles in January 2018. The concern can be eliminated by installing MAZDA CONNECT software version 59.00.545 now available on MGSS.
Some 2018 vehicles built after January 1, 2018 and equipped with Navigation may exhibit one of these concerns after the user inputs an address: A screen pops up that says "House number not found." After the user selects OK, the system finds the address or a nearby address.Instead of finding the correct address number the system adds a digit to the end of the number. Example: You enter 151 and the system comes back with 1510, 1511, 1515, 1516, etc.This only occurs with MAZDA CONNECT software version 59.00.540, which started being installed into vehicles in January 2018. The concern can be eliminated by installing MAZDA CONNECT software version 59.00.504.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).