Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda CX-5

2012– · 3 generationen · 34 dokumentierte Mängel · 6 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

**Betreff:** Ankündigung des Special Service Program (SSPE2): Bedenken zu Ethernet-Kommunikation und Over-the-Air (OTA) Software-Updates sowie Manufacturer Service Program (MSP67): Batterieentladung bei 2026MY CX-5 Fahrzeugen. DRINGEND: AUSLIEFERUNG BETROFFENER FAHRZEUGE SOFORT STOPPEN. MAZDA VERKAUFS- UND SERVICETEAMS: HANDLUNGSBEDARF. Für beide Kampagnen zusammen befinden sich etwa 27.565 Fahrzeuge im Bestand der US-Mazda-Händler. Alle Mazda-Händler müssen sämtliche betroffenen Neu-, Gebraucht- oder Certified-Pre-Owned-Fahrzeuge im Bestand bis zum Abschluss der Reparatur unter Quarantäne stellen. Die Liste der betroffenen Händlerbestände steht jedem District Service Manager zusammen mit dieser Händler-E-Mail zur Verfügung. Nach Abschluss der Reparatur kann das Fahrzeug ausgeliefert werden. Der Garantieantrag kann später ohne Nachteile eingereicht werden, da das Fahrzeug bereits repariert wurde. Mazda Motor Corporation hat beschlossen, zwei Serviceprogramme durchzuführen, das Special Service Program (SSP) und das Manufacturer Service Program (MSP), und zwar an bestimmten 2026MY CX-5 Fahrzeugen, die in den USA und in den US-Territorien verkauft wurden. Fahrzeuge, die auch von Mazda Motor de Mexico (MMdM) und Mazda Canada Inc. (MCI) produziert wurden, sind ebenfalls betroffen und sollten, sofern sie in Ihrem Autohaus vorgestellt werden, repariert werden. Beschreibung, Modell, Modelljahr und FIN-Bereiche (VIN) aller Fahrzeuge dieser beiden Kampagnen finden Sie unten. Von SSPE2 sind 70.225 Fahrzeuge betroffen, von MSP67 53.653 Fahrzeuge. Alle Fahrzeuge der MSP67 sind auch von der Kampagne SSPE2 betroffen. Bitte lesen Sie dieses gesamte Schreiben für alle Reparaturinformationen. **Special Service Program SSPE2: Bedenken zu Ethernet-Kommunikation und OTA-Software-Updates** SSPE2 behandelt zwei Themen: 1) **Ethernet-Kommunikation (CDC-DCM-Kommunikation):** Die Kommunikation zwischen Cockpit Domain Controller (CDC) und Data Communication Module (DCM) kann unterbrochen werden, wodurch vernetzte Dienste nicht verfügbar sind. Die Unterbrechung kann dazu führen, dass die Hauptwarnleuchte aufleuchtet und der Notruflautsprecher ein akustisches Warnsignal abgibt. 2) **OTA-Software-Update-Bedenken:** Aufgrund eines fehlerhaften Kommunikationssteuerungsprogramms in CDC und DCM können OTA-Software-Updates möglicherweise nicht abgeschlossen werden. Zudem kann der Software-Konfigurationsstatus des Fahrzeugs nach einem erfolgreich abgeschlossenen OTA-Update möglicherweise nicht korrekt an den Server übermittelt werden, sodass die Meldung über den erfolgreichen Abschluss nachfolgender Software-Updates ausbleiben kann. OTA-Software-Updates synchronisieren sich unter Umständen nicht richtig mit den Mazda-Servern, wodurch künftige OTA-Updates verhindert werden können. **Reparaturablauf:** DCM- und CDC-Software mithilfe eines USB-Speichersticks mit modifizierter Software neu programmieren. **Manufacturer Service Program MSP67: Batterieentladung** MSP67 behandelt zwei Themen. Bei bestimmten betroffenen CX-5 Fahrzeugen kann das Fahrzeug nach IG OFF aufgrund einer Batterieentladung nicht mehr starten. 1) **Data Communication Module (DCM):** Die Software der Remote-Diagnose kann sich zurücksetzen und nach dem Ausschalten der Zündung einen CAN-Kommunikationskanal nicht schließen, wodurch sich die Batterie mit der Zeit entlädt. Hinweis: Fahrzeuge für die Märkte Puerto Rico und Mexiko sind von diesem Faktor nicht betroffen, da sie nicht mit einem DCM ausgestattet sind. 2) **Body Control Module (BCM):** Das Body Control Module (BCM) kann sich im Ruhemodus gelegentlich zurücksetzen. Fahrzeuge können dabei zwischen Aufwach- und Ruhezuständen wechseln, was zur Batterieentladung führt. **Reparaturablauf:** BCM-Software mit M-MDS über die Mazda Diagnostic

NHTSA · Herstellerbulletin11039116Modelljahre 2026Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

**Betreff:** Ankündigung des Sonderserviceprogramms (SSPE2) zu Problemen mit der Ethernet-Kommunikation und Over-the-Air (OTA) Software-Updates sowie des Herstellerserviceprogramms (MSP67) zu Batterieentladung – 2026er CX-5 Fahrzeuge DRINGEND – AUSLIEFERUNG BETROFFENER FAHRZEUGE STOPPEN: MAZDA VERKAUFS- UND SERVICETEAMS MASSNAHME ERFORDERLICH: Insgesamt befinden sich etwa 27.565 Fahrzeuge (für beide Kampagnen zusammen) im Bestand der US-Mazda-Händler. Alle Mazda-Händler müssen betroffene Neu-, Gebraucht- oder Certified-Pre-Owned-Fahrzeuge im Bestand bis zum Abschluss der Reparatur unter Quarantäne stellen. Die Liste der betroffenen Bestandsfahrzeuge wird jedem District Service Manager zusammen mit dieser E-Mail an die Händler zur Verfügung gestellt. Nach Abschluss der Reparatur kann das Fahrzeug ausgeliefert werden, und der Garantieantrag kann später ohne Nachteile eingereicht werden, da das Fahrzeug bereits repariert wurde. Mazda Motor Corporation hat beschlossen, zwei Serviceprogramme durchzuführen: das Sonderserviceprogramm (Special Service Program, SSP) und das Herstellerserviceprogramm (Manufacturer Service Program, MSP) für bestimmte 2026er CX-5 Fahrzeuge, die in den USA und in US-Territorien verkauft wurden. Fahrzeuge, die auch von Mazda Motor de Mexico (MMdM) und Mazda Canada Inc. (MCI) produziert wurden, sind ebenfalls betroffen und sollten, sofern sie Ihrem Autohaus vorgeführt werden, repariert werden. Beschreibung, Modell, Modelljahr und FIN-Bereiche aller Fahrzeuge in diesen beiden Kampagnen finden Sie unten. Von SSPE2 sind 70.225 Fahrzeuge betroffen, von MSP67 53.653 Fahrzeuge. Alle Fahrzeuge in MSP67 sind außerdem von der Kampagne SSPE2 betroffen. Bitte lesen Sie dieses vollständige Schreiben für alle Reparaturinformationen. **Sonderserviceprogramm SSPE2 – Probleme mit Ethernet-Kommunikation und OTA-Software-Updates** SSPE2 behandelt zwei Probleme: 1) Problem mit der Ethernet-Kommunikation (Kommunikation CDC–DCM): Die Kommunikation zwischen dem Cockpit Domain Controller (CDC) und dem Data Communication Module (DCM) kann unterbrochen werden, wodurch die vernetzten Dienste nicht verfügbar sind. Die Unterbrechung kann dazu führen, dass die Hauptwarnleuchte aufleuchtet und der Notruflautsprecher einen akustischen Warnton abgibt. 2) Problem mit OTA-Software-Updates: Aufgrund eines fehlerhaften Kommunikationssteuerungsprogramms in CDC und DCM kann der Abschluss von OTA-Software-Updates verhindert werden. Wurde ein OTA-Software-Update erfolgreich abgeschlossen, kann die Softwarekonfiguration des Fahrzeugs außerdem möglicherweise nicht korrekt an den Server übertragen werden, wodurch die Meldung über den erfolgreichen Abschluss nachfolgender Software-Updates ausbleiben kann. OTA-Software-Updates synchronisieren sich möglicherweise nicht ordnungsgemäß mit den Mazda-Servern, wodurch künftige OTA-Updates verhindert werden könnten. Reparaturbeschreibung: Neuprogrammierung der DCM- und CDC-Software mithilfe eines USB-Speichersticks mit geänderter Software. **Herstellerserviceprogramm MSP67 – Problem mit Batterieentladung** MSP67 behandelt zwei Probleme: Bei bestimmten betroffenen CX-5 Fahrzeugen kann das Fahrzeug nach IG OFF aufgrund einer Batterieentladung möglicherweise nicht mehr starten. 1) Data Communication Module (DCM): Die Software der Remote-Diagnose kann zurückgesetzt werden und dabei nach dem Ausschalten der Zündung einen CAN-Kommunikationskanal nicht schließen, wodurch sich die Batterie mit der Zeit entlädt. Hinweis: Fahrzeuge für die Märkte Puerto Rico und Mexiko sind von diesem Faktor nicht betroffen, da sie nicht mit einem DCM ausgestattet sind. 2) Body Control Module (BCM): Das Body Control Module (BCM) kann sich während des Ruhemodus gelegentlich zurücksetzen. Die Fahrzeuge können zwischen Aufwach- und Ruhezustand wechseln, was zu einer Batterieentladung führt. Reparaturbeschreibung: Neuprogrammierung der BCM-Software mit M-MDS unter Verwendung der Mazda Diagnostic and Repair Software II (MDARS II). Die DCM-Software wird durch SSPE2 neu programmiert. Hinweis: Bei der Neuprogrammierung des BCM wird das Central Gateway (CGW) automatisch mit aktualisiert.

NHTSA · Herstellerbulletin11039115Modelljahre 2026Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

**Betreff:** Ankündigung des Sonderservice-Programms (SSPE2) zu Ethernet-Kommunikation und Over-the-Air (OTA)-Update-Problemen sowie des Herstellerservice-Programms (MSP67) zur Batterieentladung – 2026er CX-5 Fahrzeuge **DRINGEND – AUSLIEFERUNG BETROFFENER FAHRZEUGE STOPPEN:** **MAZDA-VERKAUFS- UND SERVICETEAMS – MASSNAHME ERFORDERLICH:** Für beide Kampagnen zusammen befinden sich etwa 27.565 Fahrzeuge (für beide Kampagnen) im Bestand der US-amerikanischen Mazda-Händler. Alle Mazda-Händler müssen betroffene Neu-, Gebraucht- oder Certified-Pre-Owned-Fahrzeuge im Bestand bis zum Abschluss der Reparatur unter Quarantäne stellen. Die Liste der betroffenen Händlerbestände steht jedem District Service Manager zusammen mit der Benachrichtigung in dieser Händler-E-Mail zur Verfügung. Nach Abschluss der Reparatur kann das Fahrzeug ausgeliefert werden, und der Garantieantrag kann später ohne Nachteile eingereicht werden, da das Fahrzeug bereits repariert wurde. Die Mazda Motor Corporation hat beschlossen, zwei Serviceprogramme durchzuführen, das Sonderservice-Programm (SSP) und das Herstellerservice-Programm (MSP), für bestimmte 2026er CX-5 Fahrzeuge, die in den USA und den US-Territorien verkauft werden. Fahrzeuge, die auch von Mazda Motor de Mexico (MMdM) und Mazda Canada Inc. (MCI) produziert wurden, sind betroffen und sollten repariert werden, wenn sie Ihrem Autohaus vorgeführt werden. Bitte entnehmen Sie die Beschreibung, das Modell, das Modelljahr und die VIN-Bereiche aller Fahrzeuge dieser beiden Kampagnen dem folgenden Text. Von SSPE2 sind 70.225 Fahrzeuge betroffen, von MSP67 sind 53.653 Fahrzeuge betroffen. Alle Fahrzeuge in MSP67 sind ebenfalls von der Kampagne SSPE2 betroffen. Bitte lesen Sie dieses vollständige Schreiben für alle Reparaturinformationen. **Sonderservice-Programm SSPE2 – Probleme mit Ethernet-Kommunikation und OTA-Updates** SSPE2 behandelt zwei Probleme: 1) Ethernet-Kommunikation (CDC-DCM-Kommunikation): Die Kommunikation zwischen Cockpit Domain Controller (CDC) und Data Communication Module (DCM) kann unterbrochen werden, wodurch die vernetzten Dienste nicht verfügbar sind. Die Unterbrechung kann dazu führen, dass die Hauptwarnleuchte aufleuchtet und der Notruflautsprecher einen akustischen Warnton ausgibt. 2) OTA-Software-Update-Problem: Aufgrund eines fehlerhaften Kommunikationssteuerungsprogramms in CDC und DCM können OTA-Software-Updates möglicherweise nicht abgeschlossen werden. Wenn ein OTA-Software-Update erfolgreich abgeschlossen wurde, wird der Software-Konfigurationsstatus des Fahrzeugs möglicherweise nicht korrekt an den Server übertragen, wodurch die Benachrichtigung über nachfolgende erfolgreich abgeschlossene Software-Updates verhindert werden kann. OTA-Software-Updates synchronisieren sich möglicherweise nicht ordnungsgemäß mit den Servern von Mazda, wodurch künftige OTA-Updates potenziell verhindert werden können. Reparaturbeschreibung: DCM- und CDC-Software mit einem USB-Speicherstick mit modifizierter Software neu programmieren. **Herstellerservice-Programm MSP67 – Problem mit der Batterieentladung** MSP67 behandelt zwei Probleme: Bei bestimmten betroffenen CX-5 Fahrzeugen kann es vorkommen, dass das Fahrzeug nach IG OFF aufgrund einer Batterieentladung nicht gestartet werden kann. 1) Data Communication Module (DCM): Die Software der Ferndiagnose kann sich zurücksetzen und einen CAN-Kommunikationskanal nach dem Ausschalten der Zündung nicht schließen, wodurch sich die Batterie mit der Zeit entladen kann. Hinweis: Fahrzeuge für die Märkte Puerto Rico und Mexiko sind von diesem Faktor nicht betroffen, da sie nicht mit einem DCM ausgestattet sind. 2) Body Control Module (BCM): Das Body Control Module (BCM) kann sich im Ruhemodus zeitweise zurücksetzen. Fahrzeuge können zwischen Aufwach- und Ruhezuständen wechseln, was zu einer Batterieentladung führt. Reparaturbeschreibung: BCM-Software mit M-MDS über Mazda Diagnostic and Repair Software II (MDARS II) neu programmieren. Die DCM-Software wird durch SSPE2 neu programmiert. Hinweis: Wenn das BCM neu programmiert wird, wird auch das Central Gateway (CGW) automatisch aktualisiert.

NHTSA · Herstellerbulletin11039114Modelljahre 2026Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11039113Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11039112Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11037897Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelElektrikNA

Bulletin

This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 05/27/26, 04/20/26, 04/09/26, 03/25/26 and 03/13/26 DESCRIPTION Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 DTC U0156:00 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) During a Bluetooth phone call, tapping the navigation icon does not launch Google Maps During an Apple CarPlay phone call, the Climate Control fullscreen menu cannot be accessed While the Climate Control screen is displayed in full screen, tapping the Apple CarPlay icon does not launch Apple CarPlay

NHTSA · Herstellerbulletin11037633Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 II · 2016–2025
BulletinMittelElektrikNA

Bulletin

Diese Service-Alarmmeldung ersetzt die zuvor herausgegebenen, unten aufgeführten Service-Alarmmeldungen: Die Änderungen sind in Rot gekennzeichnet. Infotainment-Neustart bei installierter Navigationskarte. Diese Serviceinformation ist nicht mehr gültig. Bitte beachten Sie stattdessen die folgenden aktualisierten Technischen Service-Bulletins: CX-5 / CX-9: 16-002/23 - AKTUALISIERTE SOFTWAREVERSION BEI PROBLEMEN MIT DEM MAZDA CONNECT INFOTAINMENTSYSTEM (7. GENERATION TYP). Mazda3 / CX-30 (Non-Turbo): 16-008/23 - AKTUALISIERTE SOFTWAREVERSION BEI PROBLEMEN MIT DEM MAZDA CONNECT INFOTAINMENTSYSTEM. Mazda3 / CX-30 (Turbo): 16-007/23 - AKTUALISIERTE SOFTWAREVERSION BEI PROBLEMEN MIT DEM MAZDA CONNECT INFOTAINMENTSYSTEM.

NHTSA · Herstellerbulletin11037012Modelljahre 2021Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11036736Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11036735Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11035729Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11035728Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11035727Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11035726Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.

NHTSA · Herstellerbulletin11035725Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 II · 2016–2025
BulletinMittelKarosserieNA

Bulletin

Dieses Bulletin ersetzt die zuvor unten aufgeführten Bulletins. Die Änderungen sind in Rot vermerkt. 09-012/21 13.12.21, 10.06.21 und 27.04.21 BESCHREIBUNG Einige Kunden können folgende Symptome erleben: Die Türverriegelung/Entriegelung funktioniert nicht mit dem Fernschalter des Senders. 1. Die Türverriegelung/Entschlussfunktion funktioniert nicht mit dem Tür- und Entriegelungssensor. 2. Der Motor startet nicht über den Zündschalter. 3. Der Sender arbeitet von selbst. 4. Die Schlüsselbatterie entlädt sich schneller als üblich. 5. Symptome 1-3: Dies kann durch übermäßige Last auf den Fernsender verursacht werden, die elektrische Anschlüsse verformen und einen schlechten Kontakt mit der Batterie schaffen. Um dieses Problem zu beseitigen, wurde die Struktur des Fernsender modifiziert, um die Verformung der elektrischen Anschlüsse zu verringern. Symptom 4-5: Dies kann entstehen, wenn übermäßige Last auf den Fernsender ausgeübt wird, wodurch eine Lücke um die Dichtung entsteht, in die Feuchtigkeit eindringt und die Platine korrodiert, wodurch die Schlüsselbatterie schneller als üblich entlädt wird. Um dieses Problem zu beseitigen, wurde die Dicke der Gehäusewand an der Dichtungsoberfläche erhöht und die Haftfestigkeit der Komponenten verbessert, um Verformungen zu verhindern. REPARATURVERFAHREN Wenn die Batterie defekt ist oder falsch installiert ist, ersetzen Sie die Batterie und/oder installieren Sie sie korrekt. Wenn die Fernbedienung der Energiesparfunktion ausgeschaltet ist und die Batterie korrekt eingebaut ist, ersetzen Sie den defekten Fernsender gemäß den Anweisungen auf MGSS (IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING) durch einen modifizierten Sender. HINWEIS: Ersetzen Sie nicht andere Fernsender des Fahrzeugs, wenn keine Probleme auftreten.

NHTSA · Herstellerbulletin11034436Modelljahre 2021Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-5 III · 2025–
BulletinMittelElektrikNA

Bulletin

Infotaintment center display and connected vehicle improper operation. This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 04/20/26, 04/09/26, 03/25/26 and 03/13/26 DESCRIPTION Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 DTC U0156:00 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) During a Bluetooth phone call, tapping the navigation icon does not launch Google Maps During an Apple CarPlay phone call, the Climate Control fullscreen menu cannot be accessed While the Climate Control screen is displayed in full screen, tapping the Apple CarPlay icon does not launch Apple CarPlay

NHTSA · Herstellerbulletin11033226Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelFahrwerkNA

Bulletin

DESCRIPTION Some customers may experience Google Assistant Improper Operation. 1. The vehicles location and the location indicated by voice input are far apart. Example: The attached video shows that the vehicle is in Irvine, CA; however, when the driver asked for directions, the system responded with a location in Washington State. Temorary Workaround Search the navigation destination manually, instead of using Google Assistant . REPAIR PROCEDURE Perform Factory Reset NOTE: Factory Reset will remove all customer settings. In addition, the pre-installed applications will also be reset to their factory settings. Get permission from the customer before you proceed.

NHTSA · Herstellerbulletin11032021Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelFahrwerkNA

Bulletin

DESCRIPTION Some customers may experience Mazda Connect User Profile Improper Operation. NOTE: The user profile may not be recognized at start up due to the steering wheel spoke blocking the View Monitor camera. This condition is normal. Index User profile is not displayed on the top right corner Unable To Switch Out Of The "Driver" Profile Center Display Freezes If "Cancel" Is Selected Instead Of Entering Profile Lock Code REPAIR PROCEDURE If the Recovery procedure above does not resolve the issue, perform the following: 1. Disconnect the 12V battery. 2. Wait about 1 minute. 3. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the condition and is working on a resolution. Vehicle driving operation is not affected during these conditions. No repairs or component replacements should be attempted at this time. Vehicle may be released to the customer.

NHTSA · Herstellerbulletin11032020Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelElektrikNA

Bulletin

SA-015/26 - INFOTAINMENT CENTER DISPLAY AND CONNECTED VEHICLE IMPROPER OPERATION This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 04/09/26 and 03/25/26 and 03/13/26 Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) During a Bluetooth phone call, tapping the navigation icon does not launch Google Maps During an Apple CarPlay phone call, the Climate Control fullscreen menu cannot be accessed While the Climate Control screen is displayed in full screen, tapping the Apple CarPlay icon does not launch Apple CarPlay REPAIR PROCEDURE simplified and updated recovery instructions Recovery - Turn off the vehicle and allow it to fully power down to sleep mode Turn off, exit, and lock the vehicle, let it sit for 5+ mins If the Recovery procedure above does not resolve the issue, perform the following: Disconnect the 12V battery negative cable. Wait 10+ minutes. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the condition and is working on a resolution. Vehicle driving operation is not affected during these conditions. No repairs or component replacements should be attempted at this time. The vehicle may be released to the customer.

NHTSA · Herstellerbulletin11032017Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelElektrikNA

Bulletin

SA-015/26 - INFOTAINMENT CENTER DISPLAY AND CONNECTED VEHICLE IMPROPER OPERATION This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 03/25/26 and 03/13/26 Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Center Display Home Screen Partial Boot Up No Connected Vehicle One Time Passcode (OTP) REPAIR PROCEDURE simplified and updated recovery instructions Recovery - Turn off the vehicle and allow it to fully power down to sleep mode Turn off, exit, and lock the vehicle, let it sit for 5+ mins If the Recovery procedure above does not resolve the issue, perform the following: Disconnect the 12V battery negative cable. Wait 10+ minutes. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the condition and is working on a resolution. Vehicle driving operation is not affected during these conditions. No repairs or component replacements should be attempted at this time. The vehicle may be released to the customer.

NHTSA · Herstellerbulletin11032016Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelFahrwerkNA

Bulletin

SA-006/26 - 2026 CX-5 - SERVICE CAUTIONS FOR NEW AND REVISED FEATURES. The 2026 CX-5 has new and revised features that are different from previous models and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. New Features: Google Built-In Google Built-In Status Bar User Registration Cockpit Domain Controller Data Communication Module (DCM) Data Communication Module (DCM) Backup Battery Emergency Call System Over The Air (OTA) Update Over The Air (OTA) Error Message/Error Code Stolen Vehicle Assistance Connectivity Service Period SD Map Card Steering Switch Apple CarPlay/Android Auto USB-C Wired Connection Maintenance Notification Odometer/Tripmeter Location Change i-Activsense Driver Monitoring (DM) System Cruising & Traffic Support (CTS) --> Lane Change Assist Service Information: PDI Fuse Location Mazda Connected Vehicle Viewer (MCVV) Mazda Connected Vehicle Maintenance Mode 12V Battery Disconnect Sleep Mode App Force Stop Mazda Diagnostic and Repair Software II (MDARS II) Mazda Connect 3 Center Display Quick Guide Send Feedback to Google

NHTSA · Herstellerbulletin11032013Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelKarosserieNA

Bulletin

This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-015/26 03/13/26 DESCRIPTION Index Intermittent Globe with a slash icon Beep sound near the SOS button and SOS button amber or red LED Instrument Cluster Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Some customers may experience the following: 1. Intermittent Globe with a slash icon. The Globe with Slash icon indicates that communication between the Cockpit Domain Controller (CDC) and the Data Communication Module (DCM) has not yet been completed. This communication may take up to 90 seconds to complete. During this time, some Mazda Connect 3 functions, such as Google Assistant, will not be available. Once communication is complete, the Globe with Slash icon will be replaced by the reception icon, as shown below. Recovery The system may recover on its own: After several minutes of driving. After Ignition OFF, close doors/trunk/liftgate/hood and wait approximately 3 minutes to put the vehicle in sleep mode, then turn ignition back ON. Sleep mode can be confirmed by monitoring USB-C port LED's. LED's are off when in sleep mode. REPAIR PROCEDURE If the Recovery procedure above does not resolve the issue, perform the following: 1. Disconnect the 12V battery. 2. Wait about 1 minute. 3. Reconnect the 12V battery and retest. Inform the customer that Mazda is aware of the condition and is working on a resolution. Vehicle driving operation is not affected during these conditions. No repairs or component repalcements should be attempted at this time. Vehicle may be released to the customer.

NHTSA · Herstellerbulletin11030641Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 III · 2025–
BulletinMittelElektrikNA

Bulletin

DESCRIPTION The 2026 CX-5 has new and revised features that are different from previous models and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. Symptom Service Alert Intermittent Globe with a slash icon Beep sound near the SOS button SOS button amber or red LED Master Warning Light illuminated The center display screen is blank No data plan message DTC U2701:89 Communication error with cockpit domain controller (CDC)(Ethernet) SA-015/26 Incorrect Sign in to network notification, even though the customer has signed in to the network correctly SA-016/26 Intermittent loss of the MyMazda App remote function SA-017/26 Apple CarPlay/Android Auto does not connect by wireless or USB connection SA-018/26

NHTSA · Herstellerbulletin11030624Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-5 II · 2016–2025
BulletinMittelElektrikNA

Bulletin

Dieses Bulletin ersetzt das/die zuvor herausgegebene(n) Bulletin(s), die unten aufgeführt sind. Die Änderungen sind unten in Rot gekennzeichnet. 01-007/24 06/20/24 MOTORÖLSTANDSWARNLEUCHTE AN MIT DTC P250F:00 AUFGRUND NIEDRIGEN MOTORÖLSTANDS (AKTUALISIERT MIT SSPD5-INFORMATIONEN). Alle Mazda Händler: Folgen Sie dem Sonderservice-Programm SSPD5 Valve Stem Seal Class Action, um festzustellen, ob die Ventilschaftdichtungen ersetzt werden sollten. 1. Überprüfen Sie das Kundenanliegen gemäß dem Sonderservice-Programm SSPD5 Reparaturverfahren. Wie im Reparaturverfahren SSPD5 beschrieben, bestätigen Sie, dass das Motoröl nicht aus dem Motor austritt. Meldet der Kunde bei der Ankunft beim Händler, dass der Motorölstand niedrig ist, ersetzen Sie die Ventilschaftdichtungen gemäß dem Ablaufdiagramm für SSPD5. Ist der Motorölstand bei der Ankunft niedrig, ohne dass der Kunde eine Beanstandung vorbringt, prüfen Sie auf SSPD5, und wenn die Ventilschaftdichtungen im Rahmen einer früheren Garantie nicht ersetzt wurden, ersetzen Sie die Dichtungen. Wurden die Ventilschaftdichtungen im Rahmen einer früheren Garantieforderung ersetzt, wenden Sie sich für weitere Anweisungen an die Hotline. Müssen die Ventilschaftdichtungen ersetzt werden, ersetzen Sie die Ventilschaftdichtungen auf der Auslassseite durch verbesserte Ausführungen unter Verwendung der in den unten aufgeführten Reparaturverfahren genannten Spezialwerkzeuge. 2. Motoröl nachfüllen (falls erforderlich). HINWEIS: Motoröl sollte nicht nachgefüllt werden, ohne die Ventilschaftdichtungen zu ersetzen. 3. Überprüfen Sie die Reparatur. HINWEIS: Wenn Sie bei einem Kundenbesuch wegen Ölverbrauchs im Zusammenhang mit SSPD5 unsicher sind, welche Schritte zu unternehmen sind, füllen Sie die Dealer Recall Help auf OneMazda aus.

NHTSA · Herstellerbulletin11029240Modelljahre 2021Automatisch übersetzt · Original: EnglischDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).