Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda CX-90

2023– · 1 generationen · 9 dokumentierte Mängel · 2 Märkte
Generationen
Alle GenerationenCX-902023–914428

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
BulletinMittelElektrikNA

Bulletin

DESCRIPTION Some customers may experience ATF seepage from the High-Voltage (HV) motor terminal area. If ATF seepage is confirmed at this location, one or more of the following conditions may occur: ATF is leaking from the HV cable. ATF is leaking from the inverter connection. This is caused by through-hole porosity generated during manufacturing of the intermediate terminal block (busbar), allowing oil to seep from the component. To eliminate this concern, an Impregnation treatment (a sealing process in which resin, oil, or other liquids are infused into minute internal voids in the material, such as porosity, pinholes, or cracks) is applied to the aluminum plate portion of the busbar. REPAIR PROCEDURE 1. Verify the customer concern. 2. Replace the busbar with a new one.

NHTSA · Herstellerbulletin11035601Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-037/26 05/28/26 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models.

NHTSA · Herstellerbulletin11034440Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-049/25 10/16/2025 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models. In addition to the procedures outlined in the Workshop Manual, please follow these additional steps when removing an existing label to help simplify the application of the new one:

NHTSA · Herstellerbulletin11033443Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

On some vehicles, an engine oil leak from the rear of the engine at the turbocharger drain back tube could be be confused as an oil leak from behind the bell housing. The bolt holes for the drain back tube to the block are drilled through to the inside of the engine and thread sealer was not properly applied to the bolts threads, causing oil to leak past the threads. NOTE: The WSM was updated to show these bolts are a to be replaced if removed. New bolts will have thread sealer already applied.

NHTSA · Herstellerbulletin11029491Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 09-019/25 04/15/25 Some vehicles equipped with the Adaptive Front lighting System (AFS) may exhibit the exterior light warning light/exterior light warning indication on while driving or when the ignition is turned on and DTC B10A3:86 (Error signal received from swivel actuator (LH)) stored in memory. NOTE: The combination light with AFS can be distinguished if it is equipped with the parking light/daytime running light (DRL) that illuminates while the ignition is turned on. This may be caused by the AFS Control Module detecting a false headlight malfunction. This concern will likely occur when the light returns to the center position after swiveling. To eliminate this concern, the control software of the AFS control module has been further modified.

NHTSA · Herstellerbulletin11029238Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

SSPD9 Adding coverage for Towing Subject: Notification of Warranty Extension Program - Special Service Program (SSP) D9 2024 CX-90 and 2025 CX-70, SKYACTIV-G 2.5 PHEV Water Heater Malfunction Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the water heater concern on certain MY2024 CX-90 PHEV and MY2025 CX-70 PHEV vehicles that are equipped with the suspected water heater. The warranty coverage for an applicable repair has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. Concern Outline: On certain subject vehicles, while warming up the cabin after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: 1) The heater does not work properly. 2) The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored in memory. - P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair the vehicle under this Special Service Program. SSPD9 Water Heater Malfunction WARRANTY EXTENSION For certain 2024 CX-90 PHEV and 2025 CX-70 PHEV vehicles that are equipped with the suspected water heater, the warranty coverage for an applicable repair of the water heater has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. CONDITION OF CONCERN While warning up the cabin using the water heater after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: Heater performance may become poor: 1. The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored. 2. P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance OWNER NOTIFICATION Mazda will notify all U.S. owners of the subject vehicles by first class mail no later than September 1, 2025. Owners will be advised that they do not need to bring their vehicle to a dealer if it does not exhibit the affected conditions. Owners will also be advised that any previous repair on the water heater due to concerns related to this SSP will be eligible for reimbursement if the repair was performed at the owners expense. Please refer the customer to the Owner Letter for reimbursement instructions. NO COVERAGE FOR BRANDED AND OTHER LIMITATIONS - EXCLUDED COVERAGE Per Warranty policy 3.26 all limitations apply to this Warranty Extension. There is no coverage for total loss/insurance/salvage or rebuilt titles (W1). If you are unsure about the policy please contact the Warranty Department. REPAIR PROCEDURE If you receive customer complaints about the check engine light ON with P0AA6:00 with any of the symptoms mentioned above, verify the concerns and perform appropriate repair according to the Service Information Technical Service Bulletin (TSB) No. 07-006/24. Note: Please always refer to the latest version of TSB.

NHTSA · Herstellerbulletin11023704Modelljahre 2024–2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

SSPD9 August 25, 2025 Adding coverage for Towing Subject: Notification of Warranty Extension Program - Special Service Program (SSP) D9 2024 CX-90 and 2025 CX-70, SKYACTIV-G 2.5 PHEV Water Heater Malfunction Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the water heater concern on certain MY2024 CX-90 PHEV and MY2025 CX-70 PHEV vehicles that are equipped with the suspected water heater. The warranty coverage for an applicable repair has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. Concern Outline: On certain subject vehicles, while warming up the cabin after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: 1) The heater does not work properly. 2) The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored in memory. - P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair the vehicle under this Special Service Program. SSPD9 Water Heater Malfunction WARRANTY EXTENSION For certain 2024 CX-90 PHEV and 2025 CX-70 PHEV vehicles that are equipped with the suspected water heater, the warranty coverage for an applicable repair of the water heater has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. CONDITION OF CONCERN While warning up the cabin using the water heater after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: Heater performance may become poor: 1. The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored. 2. P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance OWNER NOTIFICATION Mazda will notify all U.S. owners of the subject vehicles by first class mail no later than September 1, 2025. Owners will be advised that they do not need to bring their vehicle to a dealer if it does not exhibit the affected conditions. Owners will also be advised that any previous repair on the water heater due to concerns related to this SSP will be eligible for reimbursement if the repair was performed at the owners expense. Please refer the customer to the Owner Letter for reimbursement instructions. NO COVERAGE FOR BRANDED AND OTHER LIMITATIONS - EXCLUDED COVERAGE Per Warranty policy 3.26 all limitations apply to this Warranty Extension. There is no coverage for total loss/insurance/salvage or rebuilt titles (W1). If you are unsure about the policy please contact the Warranty Department. REPAIR PROCEDURE If you receive customer complaints about the check engine light ON with P0AA6:00 with any of the symptoms mentioned above, verify the concerns and perform appropriate repair according to the Service Information Technical Service Bulletin (TSB) No. 07-006/24. Note: Please always refer to the latest version of TSB.

NHTSA · Herstellerbulletin11022773Modelljahre 2024–2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Subject: Notification of Warranty Extension Program - Special Service Program (SSP) D9 2024 CX-90 and 2025 CX-70, SKYACTIV-G 2.5 PHEV Water Heater Malfunction Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the water heater concern on certain MY2024 CX-90 PHEV and MY2025 CX-70 PHEV vehicles that are equipped with the suspected water heater. The warranty coverage for an applicable repair has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. Concern Outline: On certain subject vehicles, while warming up the cabin after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: 1) The heater does not work properly. 2) The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored in memory. - P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair the vehicle under this Special Service Program. SSPD9 Water Heater Malfunction WARRANTY EXTENSION For certain 2024 CX-90 PHEV and 2025 CX-70 PHEV vehicles that are equipped with the suspected water heater, the warranty coverage for an applicable repair of the water heater has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. CONDITION OF CONCERN While warning up the cabin using the water heater after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: Heater performance may become poor: 1. The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored. 2. P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance OWNER NOTIFICATION Mazda will notify all U.S. owners of the subject vehicles by first class mail no later than September 1, 2025. Owners will be advised that they do not need to bring their vehicle to a dealer if it does not exhibit the affected conditions. Owners will also be advised that any previous repair on the water heater due to concerns related to this SSP will be eligible for reimbursement if the repair was performed at the owners expense. Please refer the customer to the Owner Letter for reimbursement instructions. NO COVERAGE FOR BRANDED AND OTHER LIMITATIONS - EXCLUDED COVERAGE Per Warranty policy 3.26 all limitations apply to this Warranty Extension. There is no coverage for total loss/insurance/salvage or rebuilt titles (W1). If you are unsure about the policy please contact the Warranty Department. REPAIR PROCEDURE If you receive customer complaints about the check engine light ON with P0AA6:00 with any of the symptoms mentioned above, verify the concerns and perform appropriate repair according to the Service Information Technical Service Bulletin (TSB) No. 07-006/24. Note: Please always refer to the latest version of TSB.

NHTSA · Herstellerbulletin11022770Modelljahre 2024–2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Subject: Notification of Warranty Extension Program - Special Service Program (SSP) D9 2024 CX-90 and 2025 CX-70, SKYACTIV-G 2.5 PHEV Water Heater Malfunction Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the water heater concern on certain MY2024 CX-90 PHEV and MY2025 CX-70 PHEV vehicles that are equipped with the suspected water heater. The warranty coverage for an applicable repair has been extended to 8 years (96 months) from the original warranty start date, with no mileage limitation. Concern Outline: On certain subject vehicles, while warming up the cabin after starting the vehicle in EV mode, the nichrome wire in the water heater may break or a decrease in insulation resistance may be detected, causing the concerns described below: 1) The heater does not work properly. 2) The hybrid system warning light may turn on and the DTC P0AA6:00 may be stored in memory. - P0AA6:00 High voltage insulation malfunction: Decrease in vehicle insulation resistance. This is a warranty extension for the specified repair only. Inspection and replacement of non-failed parts will not be eligible for reimbursement under this SSP to the dealer or customer. This program extends the warranty period for actual failures due to defects in workmanship or materials in accordance with the Mazda Warranty Policy and Procedures. If a customer arrives at your dealership with the concern described, please repair the vehicle under this Special Service Program.

NHTSA · Herstellerbulletin11022765Modelljahre 2024–2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles may exhibit a loud vibration noise when the electric A/C compressor is operating. Due to processing variation of the counter-balance bushing (a weight to balance eccentric rotation) installed in the electric compressor, some of the bushing strongly interferes with the shaft, resulting in the humming noise. To eliminate this concern, the machining accuracy of the counter-balance bushing has been improved.

NHTSA · Herstellerbulletin11019986Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

7325C - EMISSION RECALL - 2024-2025 CX-90 AND 2025 CX-70 PHEV ONLY - HYBRID SYSTEM WARNING LIGHT MAY TURN ON. Mazda Motor Corporation has decided to conduct an Emission Recall on certain 2024-2025 CX-90 and 2025 CX-70 PHEV vehicles. Please see the description, model, year, and VIN range below for all vehicles in this campaign. There are 38,812 vehicles affected by this concern in the U.S. and U.S. Territories. Vehicles produced and sold by Mazda Canada Inc. are also included in this campaign and should be repaired if presented to your dealership following Mazda Warranty policy 3.30.STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 5,197 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or CPO in-stock vehicles until the repair is completed. The affected dealer inventory list was provided to each District Service Manager with the notification of this dealer email. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. To All Mazda Dealers: Failure to properly perform any recall repair is a direct violation of Paragraph 14(F) of the Dealer Agreement and can cause one or more of the following: Mechanical breakdown or failure, crash or injury, Dealership penalties/fines by Mazda and CARB/EPA, increased liability risk for the dealership, Missed Recall penalties, loss of customer trust and a poor Customer Experience. Concern Outline: All vehicles can be repaired immediately upon receipt of this Mazda Dealer announcement by following the repair and warranty claiming procedures housed in Mazda Global Service Support (MGSS). On certain subject vehicles, during normal driving, a temporary decrease in insulation resistance may be detected, which could be mistakenly judged as an electric leakage, causing the hybrid system warning light to turn on and the leakage detection message to be displayed. The DTC P0AA6:00 may be stored in memory. In such a condition, once the vehicle power is switched off, it may become impossible to restart the vehicle due to fail-safe mode activation. Repair Outline: Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). The DTC code that may appear is P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance. The software update will re-calibrate electrical leakage detection criteria and allow vehicle re-start. Legitimate electrical leakage faults can still be detected and store DTC P0AA6:00. If DTC P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance is still present after repair of the 7325C Recall, please diagnose the issue using the Workshop Manual or search for a current Technical Service Bulletin.

NHTSA · Herstellerbulletin11019173Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

7325C - EMISSION RECALL - 2024-2025 CX-90 AND 2025 CX-70 PHEV ONLY - HYBRID SYSTEM WARNING LIGHT MAY TURN ON. Mazda Motor Corporation has decided to conduct an Emission Recall on certain 2024-2025 CX-90 and 2025 CX-70 PHEV vehicles. Please see the description, model, year, and VIN range below for all vehicles in this campaign. There are 38,812 vehicles affected by this concern in the U.S. and U.S. Territories. Vehicles produced and sold by Mazda Canada Inc. are also included in this campaign and should be repaired if presented to your dealership following Mazda Warranty policy 3.30.STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 5,197 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or CPO in-stock vehicles until the repair is completed. The affected dealer inventory list was provided to each District Service Manager with the notification of this dealer email. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. To All Mazda Dealers: Failure to properly perform any recall repair is a direct violation of Paragraph 14(F) of the Dealer Agreement and can cause one or more of the following: Mechanical breakdown or failure, crash or injury, Dealership penalties/fines by Mazda and CARB/EPA, increased liability risk for the dealership, Missed Recall penalties, loss of customer trust and a poor Customer Experience. Concern Outline: All vehicles can be repaired immediately upon receipt of this Mazda Dealer announcement by following the repair and warranty claiming procedures housed in Mazda Global Service Support (MGSS). On certain subject vehicles, during normal driving, a temporary decrease in insulation resistance may be detected, which could be mistakenly judged as an electric leakage, causing the hybrid system warning light to turn on and the leakage detection message to be displayed. The DTC P0AA6:00 may be stored in memory. In such a condition, once the vehicle power is switched off, it may become impossible to restart the vehicle due to fail-safe mode activation. Repair Outline: Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). The DTC code that may appear is P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance. The software update will re-calibrate electrical leakage detection criteria and allow vehicle re-start. Legitimate electrical leakage faults can still be detected and store DTC P0AA6:00. If DTC P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance is still present after repair of the 7325C Recall, please diagnose the issue using the Workshop Manual or search for a current Technical Service Bulletin.

NHTSA · Herstellerbulletin11017711Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles equipped with the Adaptive Front lighting System (AFS) may exhibit the exterior light warning light/exterior light warning indication on while driving or when the ignition is turned on and DTC B10A3:86 (Error signal received from swivel actuator (LH)) stored in memory. NOTE: The combination light with AFS can be distinguished if it is equipped with the parking light/daytime running light (DRL) that illuminates while the ignition is turned on. This may be caused by the AFS Control Module detecting a false headlight malfunction. This concern will likely occur when the light returns to the center position after swiveling.To eliminate this concern, the control software of the AFS control module has been further modified. Customers having this concern should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin11017483Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

7325C - EMISSION RECALL - 2024-2025 CX-90 AND 2025 CX-70 PHEV ONLY - HYBRID SYSTEM WARNING LIGHT MAY TURN ON. Mazda Motor Corporation has decided to conduct an Emission Recall on certain 2024-2025 CX-90 and 2025 CX-70 PHEV vehicles. Please see the description, model, year, and VIN range below for all vehicles in this campaign. There are 38,812 vehicles affected by this concern in the U.S. and U.S. Territories. Vehicles produced and sold by Mazda Canada Inc. are also included in this campaign and should be repaired if presented to your dealership following Mazda Warranty policy 3.30. STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 5,197 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or CPO in-stock vehicles until the repair is completed. The affected dealer inventory list was provided to each District Service Manager with the notification of this dealer email. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired.To All Mazda Dealers: Failure to properly perform any recall repair is a direct violation of Paragraph 14(F) of the Dealer Agreement and can cause one or more of the following: Mechanical breakdown or failure, crash or injury, Dealership penalties/fines by Mazda and CARB/EPA, increased liability risk for the dealership, Missed Recall penalties, loss of customer trust and a poor Customer Experience. Concern Outline: All vehicles can be repaired immediately upon receipt of this Mazda Dealer announcement by following the repair and warranty claiming procedures housed in Mazda Global Service Support (MGSS). On certain subject vehicles, during normal driving, a temporary decrease in insulation resistance may be detected, which could be mistakenly judged as an electric leakage, causing the hybrid system warning light to turn on and the leakage detection message to be displayed. The DTC P0AA6:00 may be stored in memory. In such a condition, once the vehicle power is switched off, it may become impossible to restart the vehicle due to fail-safe mode activation. Repair Outline: Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). The DTC code that may appear is P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance. The software update will re-calibrate electrical leakage detection criteria and allow vehicle re-start. Legitimate electrical leakage faults can still be detected and store DTC P0AA6:00. If DTC P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance is still present after repair of the 7325C Recall, please diagnose the issue using the Workshop Manual or search for a current Technical Service Bulletin.

NHTSA · Herstellerbulletin11016386Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

7325C - EMISSIONSRÜCKRUF - NUR 2024-2025 CX-90 UND 2025 CX-70 PHEV - WARNLEUCHTE DES HYBRIDSYSTEMS KANN SICH EINSCHALTEN Mazda Motor Corporation hat beschlossen, bestimmte Fahrzeuge der Modelle 2024-2025 CX-90 und 2025 CX-70 PHEV in einer Emissionsrückrufaktion zu überprüfen. Beschreibung, Modell, Baujahr und FIN-Bereich für alle Fahrzeuge dieser Aktion finden Sie unten. In den USA und den US-Territorien sind 38.812 Fahrzeuge von diesem Problem betroffen. Fahrzeuge, die von der Mazda Canada Inc. produziert und verkauft wurden, sind ebenfalls in dieser Aktion enthalten und sollten gemäß der Mazda-Garantierichtlinie 3.30 repariert werden, wenn sie bei Ihrem Händler vorgeführt werden. AUSLIEFERUNG BETROFFENER FAHRZEUGE STOPPEN: MAZDA-VERKAUFS- UND SERVICETEAMS - MASSNAHME ERFORDERLICH: In den Lagerbeständen der US-Mazda-Händler befinden sich etwa 5.197 Fahrzeuge, die vor der Auslieferung repariert werden müssen. Alle Mazda-Händler müssen betroffene Neu-, Gebraucht- oder Certified-Pre-Owned-Fahrzeuge (CPO) im Bestand bis zum Abschluss der Reparatur unter Quarantäne stellen. Die Liste der betroffenen Händlerbestände wurde jedem District Service Manager zusammen mit der Benachrichtigung per Händler-E-Mail übermittelt. Nach Abschluss der Reparatur kann das Fahrzeug ausgeliefert werden; der Garantieanspruch kann später ohne Nachteile eingereicht werden, da das Fahrzeug bereits repariert wurde. An alle Mazda-Händler: Eine unsachgemäße Durchführung einer Rückrufreparatur stellt einen direkten Verstoß gegen Paragraph 14(F) des Händlervertrags dar und kann eine oder mehrere der folgenden Folgen haben: mechanischer Ausfall oder Defekt, Unfall oder Verletzung, Vertragsstrafen/Bußgelder durch Mazda sowie CARB/EPA, erhöhtes Haftungsrisiko für den Händler, Strafen wegen versäumter Rückrufe, Verlust des Kundenvertrauens und ein schlechtes Kundenerlebnis. Problembeschreibung: Alle Fahrzeuge können sofort nach Erhalt dieser Mazda-Händlermitteilung repariert werden, indem den Reparatur- und Garantieabrechnungsverfahren in Mazda Global Service Support (MGSS) gefolgt wird. Bei bestimmten betroffenen Fahrzeugen kann während der normalen Fahrt ein vorübergehender Abfall des Isolationswiderstands festgestellt werden, der irrtümlich als elektrischer Leckstrom interpretiert werden kann. Dadurch leuchtet die Warnleuchte des Hybridsystems auf und die Meldung zur Leckageerkennung wird angezeigt. Der Fehlercode P0AA6:00 kann im Speicher abgelegt werden. In einem solchen Zustand kann es nach dem Ausschalten der Fahrzeugstromversorgung aufgrund der Aktivierung des Fail-Safe-Modus unmöglich werden, das Fahrzeug wieder zu starten. Reparaturbeschreibung: Die PCM mit dem Mazda Modular Diagnostic System (M-MDS) unter Verwendung der Mazda Diagnostic and Repair Software (MDARS) neu programmieren. Der mögliche Fehlercode lautet P0AA6:00 – Störung der Hochvoltisolation: Abfall des Isolationswiderstands des Fahrzeugs. Das Software-Update kalibriert die Kriterien zur Erkennung elektrischer Leckagen neu und ermöglicht den Neustart des Fahrzeugs. Echte elektrische Leckagefehler können weiterhin erkannt werden und den Fehlercode P0AA6:00 speichern. Falls der Fehlercode P0AA6:00 – Störung der Hochvoltisolation: Abfall des Isolationswiderstands nach der Reparatur der Rückrufaktion 7325C weiterhin vorhanden ist, diagnostizieren Sie das Problem bitte anhand des Werkstatthandbuchs oder suchen Sie nach einem aktuellen Technical Service Bulletin.

NHTSA · Herstellerbulletin11016385Modelljahre 2025Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelElektrikNA

Bulletin

7325C - EMISSION RECALL - 2024-2025 CX-90 AND 2025 CX-70 PHEV ONLY - HYBRID SYSTEM WARNING LIGHT MAY TURN ON. Mazda Motor Corporation has decided to conduct an Emission Recall on certain 2024-2025 CX-90 and 2025 CX-70 PHEV vehicles. Please see the description, model, year, and VIN range below for all vehicles in this campaign. There are 38,812 vehicles affected by this concern in the U.S. and U.S. Territories. Vehicles produced and sold by Mazda Canada Inc. are also included in this campaign and should be repaired if presented to your dealership following Mazda Warranty policy 3.30. STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 5,197 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or CPO in-stock vehicles until the repair is completed. The affected dealer inventory list was provided to each District Service Manager with the notification of this dealer email. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired.To All Mazda Dealers: Failure to properly perform any recall repair is a direct violation of Paragraph 14(F) of the Dealer Agreement and can cause one or more of the following: Mechanical breakdown or failure, crash or injury, Dealership penalties/fines by Mazda and CARB/EPA, increased liability risk for the dealership, Missed Recall penalties, loss of customer trust and a poor Customer Experience. Concern Outline: All vehicles can be repaired immediately upon receipt of this Mazda Dealer announcement by following the repair and warranty claiming procedures housed in Mazda Global Service Support (MGSS). On certain subject vehicles, during normal driving, a temporary decrease in insulation resistance may be detected, which could be mistakenly judged as an electric leakage, causing the hybrid system warning light to turn on and the leakage detection message to be displayed. The DTC P0AA6:00 may be stored in memory. In such a condition, once the vehicle power is switched off, it may become impossible to restart the vehicle due to fail-safe mode activation. Repair Outline: Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). The DTC code that may appear is P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance. The software update will re-calibrate electrical leakage detection criteria and allow vehicle re-start. Legitimate electrical leakage faults can still be detected and store DTC P0AA6:00. If DTC P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance is still present after repair of the 7325C Recall, please diagnose the issue using the Workshop Manual or search for a current Technical Service Bulletin.

NHTSA · Herstellerbulletin11016384Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Important Note: This Service alert is intended as an early notification for upcoming software releases. Please refer to the latest dealer communications and MGSS for updated information. CX-90 MHEV Battery: Mazda is currently experiencing many backorders on MHEV Batteries (K6Y8-67-ZBXD). The issue causing most of the concerns is a cell imbalance inside the MHEV battery, which sets DTC P0DAB. The repair solution for this concern is to perform the software reflash and replace the battery as required. The cell balancing issue is resolved with a software reflash starting in November of 2023 production and this software update is part of recall 7024J - SAFETY RECALL - MULTIPLE ECU'S REPROGRAMMING. Ensure this recall is completed on every CX-90 that comes into your dealer to prevent possible MHEV cell imbalance. As a reminder, the MHEV battery is warrantied 8 years/80,000 miles to support our customers through the life of their vehicle. In terms of the MHEV Battery back-order status, as a result of significant efforts, including air-shipping hundreds of replacement batteries, we are projecting all current backorders will be filled by the last week of March 2025. CX-90 and CX-70 PHEV Electrical Leakage: Some customers have experienced an electrical leakage fault with DTC P0AA6 resulting in a no start condition after one key-cycle. Mazda has identified a PCM software programming issue that causes this DTC occurrence. Under current PCM logic, when P0AA6 detection occurs, the vehicle is prevented from restarting. The new software will be available in late March to reflash vehicles. This allows vehicles to be restarted if the fault is detected. Should the DTC persist, perform normal MGSS service procedures for electrical leakage diagnosis.

NHTSA · Herstellerbulletin11016241Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Key Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life. NOTE: Some customers may complain about an engine no start. This may be caused by the customer inadvertently putting the key transmitter in Power Saving Function.

NHTSA · Herstellerbulletin11013788Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles may exhibit a loud vibration noise when the electric A/C compressor is operating. Due to processing variation of the counter-balance bushing (a weight to balance eccentric rotation) installed in the electric compressor, some of the bushing strongly interferes with the shaft, resulting in the humming noise. To eliminate this concern, the machining accuracy of the counter-balance bushing has been improved.

NHTSA · Herstellerbulletin11010988Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some customer may experience any of the following: Multiple Warning Lights On Infotainment center display blank Engine no start unless the key transmitter is placed near the start button Interior lights do not illuminate DTC P2507:00 - PCM, PCM POWER SYSTEM: (LOW INPUT) stored. DTC U0156:00 - PCM, CAN communication system, Communication error with CMU (Connectivity Master Unit). This may be caused by Fuse F1 not fully seated (poor terminal tension) or a poor ground connection at the front harness connector G03.

NHTSA · Herstellerbulletin11009645Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some customer may experience any of the following: Multiple Warning Lights On Infotainment center display blank Engine no start unless the key transmitter is placed near the start button Interior lights do not illuminate DTC P2507:00 - PCM, PCM POWER SYSTEM: (LOW INPUT) stored. DTC U0156:00 - PCM, CAN communication system, Communication error with CMU (Connectivity Master Unit).

NHTSA · Herstellerbulletin11008420Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.

NHTSA · Herstellerbulletin11007019Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.

NHTSA · Herstellerbulletin11007018Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles equipped with the Adaptive Front lighting System (AFS) may exhibit the exterior light warning light/exterior light warning indication on while driving or when the ignition is turned on and DTC B10A3:86 (Error signal received from swivel actuator (LH)) stored in memory.

NHTSA · Herstellerbulletin11006897Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Some vehicles may experience a warning light ON, warning messages, or a headlamp concern. After checking the vehicle, DTC B10A3:86 may be stored with or without other DTCs. Follow the repair procedure below for B10A3:86. Customers having this concern should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin11005563Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).