Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Some vehicles may exhibit a crack in the door side of the front seat cushion trim. This may be caused by the door-side surface of the cushion trim being folded and compressed when exiting the vehicle and by the surface of the cushion bolster being rubbed and stretched when entering the vehicle. Repeated occurrences of these conditions may result in a crack forming in the surface of the seat cushion trim. To eliminate this concern, the material of the door-side surface of the front seat cushion trim has been modified to improve tear strength and scratch resistance.
This may be caused by the door-side surface of the cushion trim being folded and compressed when exiting the vehicle and by the surface of the cushion bolster being rubbed and stretched when entering the vehicle. Repeated occurrences of these conditions may result in a crack forming in the surface of the seat cushion trim. To eliminate this concern, the material of the door-side surface of the front seat cushion trim has been modified to improve tear strength and scratch resistance. Customers having this concern should have their vehicle repaired using the following repair procedure.
Some customers may experience the automatic seat position adjustment operation being interrupted when adjusting the seat position using the driver personalization system or the position memory system. This unintentional interruption may be caused by the safety mechanism that stops the seat adjusting function when the sensor detects an interference, such as a trapped object caught in the seat track.
At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. Wrinkles may not be completely removed after the repair is completed. Leather is a natural material and may develop some wrinkles due to aging and wear during normal useage.
Some customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern. CX-70 / CX-90 NOTE: This repair is also applicable for a "WARNING MESSAGE FOR AVAS MALFUNCTION WITH DTC B1A03:2B" concern.
Some customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern. CX-70 / CX-90 NOTE: This repair is also applicable for a "WARNING MESSAGE FOR AVAS MALFUNCTION WITH DTC B1A03:2B" concern.
Some customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern.
Some vehicles may exhibit that the tilt switch knob on the power seat does not return to its original position after operating it and/or a stick-slip noise may occur when operating the power seat tilt switch. This may be caused by the frictional resistance of the tilt switch knob increasing in a low-temperature environment. To eliminate this concern, a solid film lubricant has been applied to the switch knob to reduce the friction.
Some customers may report issues with third-row seats, loose or damaged trim, not folding down, binding when folding up, and other concerns. NOTE: The trim is not a serviceable part and only available with the third-row seat assembly. For more information, please see Service Alert SA-063/23 in MGSS for more information.
Customers may report issues with third-row seats, loose or damaged trim, not folding down, binding when folding up, and other concerns. The technician may notice the cargo floor is out of place and may attempt to replace parts as defective. This is due to the cargo floor being uneven and/or foreign objects stuck between the third-row seats and cargo floor.
Some customers may experience the automatic seat position adjustment operation being interrupted when adjusting the seat position using the driver personalization system or the position memory system. This unintentional interruption may be caused by the safety mechanism that stops the seat adjusting function when the sensor detects an interference, such as a trapped object caught in the seat track.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).