Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda CX-9

2006–2023 · 2 generationen · 19 dokumentierte Mängel · 5 Märkte
Generationen
Modelljahr
CX-9 I · 2006–2015
RückrufKritischFahrwerkEU

Die untere Befestigungsmutter und -schraube des Stoßdämpfers an der Lenkfaust könnten sich…

Die untere Mutter und Schraube, mit der das Federbein am Lenkgelenk befestigt ist, könnten sich lockern, was zum Ablösen führen kann. Dies könnte zu einem Verlust der Kontrolle über das Fahrzeug oder zu einer Beeinträchtigung der Lenkstabilität führen, wodurch das Unfallrisiko steigen könnte.

Safety Gate · EU · RappelConso · Frankreich16. Dez. 2022a12/00509/22Modelljahre 2012–2015Automatisch übersetzt · Original: FranzösischDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumNABis zur Reparatur nicht fahren

Airbags:Frontal:Beifahrerseite:Gasgeneratormodul

Mazda North American Operations (Mazda) ruft bestimmte Fahrzeuge der Baujahre 2007–2012 CX-7, CX-9 sowie der Baujahre 2009–2012 Maza6 zurück. Bei diesen Fahrzeugen wurden die Gasgeneratoren des Beifahrer-Frontairbags zuvor im Rahmen einer früheren Rückrufaktion durch Gasgeneratoren derselben Bauart ersetzt. Die Gasgeneratoren können explodieren, da der Treibstoff nach langfristiger Einwirkung hoher absoluter Luftfeuchtigkeit, Temperatur und Temperaturwechseln zersetzt wird.

NHTSA · USA31. Okt. 201919V782000Modelljahre 2007–2012Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-9 II (2013) · 2016–2023
RückrufKritischElektrikNA

Electrical system:Wiring

Mazda North American Operations (Mazda) is recalling certain 2018 CX-9 vehicles. The wiring harness may disrupt electrical communications and disable the passenger frontal air bag, turn signals, and/or engine starting system.

NHTSA · USA30. Mai 201919V403000Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumEU

Das im Airbag-Gasgenerator verwendete Ammoniumnitrat-Treibmittel kann im Laufe der Zeit durch Temperaturwechsel und…

Das Ammoniumnitrat-Treibmittel, das im Airbag-Gasgenerator verwendet wird, kann sich mit der Zeit aufgrund von Temperaturwechseln und Feuchtigkeitseinwirkung zersetzen. Wird der Beifahrer-Frontairbag ausgelöst, kann der übermäßige Innendruck dazu führen, dass das Gehäuse des Gasgenerators birst, und Metallsplitter können durch das Kissenmaterial dringen und die Insassen verletzen.

Safety Gate · EU4. Jan. 2019A12/0022/19Modelljahre 2005–2010Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-9 I · 2006–2015
CX-9 I · 2006–2015
RückrufKritischInnenraumNABis zur Reparatur nicht fahren

Air bags:Frontal:Passenger side:Inflator module

Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · USA12. Okt. 201818V717000Modelljahre 2010–2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumNABis zur Reparatur nicht fahren

Air bags:Frontal:Passenger side:Inflator module

Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · USA9. Jan. 201818V018000Modelljahre 2009–2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumNABis zur Reparatur nicht fahren

Air bags:Frontal:Passenger side:Inflator module

Mazda North America Operations (Mazda) is recalling certain 2012 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain 2009 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain 2007-2008 CX-7 and CX-9 sold, or ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · USA18. Juli 201717V457000Modelljahre 2007–2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumNABis zur Reparatur nicht fahren

Air bags:Frontal:Passenger side:Inflator module

Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · USA29. Juni 201717V429000Modelljahre 2007–2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumNA

Airbag

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall is superseded by recall 2018030. Please see recall 2018030 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018030">Click here for more information</a>

Transport Canada10. Jan. 20172017012Modelljahre 2007–2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischFahrwerkNA

Steering

Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.

NHTSA · USA11. Apr. 201616V203000Modelljahre 2013–2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015CX-9 II (2013) · 2016–2023
RückrufKritischFahrwerkNA

Suspension

On certain vehicles, the nut and bolt holding the strut assembly to the knuckle may not have been tightened properly during the manufacturing process. Over time, this could cause the strut assembly to separate from the knuckle, resulting in a loss of steering control which would increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will inspect and replace the nut and bolt holding the strut assembly to the knuckle if found loose.

Transport Canada8. Apr. 20162016152Modelljahre 2014–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischFahrwerkNA

Suspension:Front:Control arm:Lower ball joint

Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting.

NHTSA · USA20. Juli 201515V451000Modelljahre 2007–2014Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
RückrufKritischInnenraumNA

Seats:Front assembly:Seat heater/cooler

Mazda is recalling certain model year 2010 cx-9 vehicles equipped with electrically heated front seats. There is a possibility under extremely cold conditions for the seat heater control circuit to overheat and fail due to insufficient electrical grounding.

NHTSA · USA19. Feb. 201010V051000Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 II (2013) · 2016–2023
RückrufMittelMotorEU

Die Flügelrad der Niederdruck-Kraftstoffpumpe kann sich verformen und einen Ausfall der Förderleistung verursachen…

Die Turbine der Niederdruck-Kraftstoffpumpe kann sich verformen und einen Ausfall der Kraftstoffförderung verursachen. Dies kann dazu führen, dass der Motor nicht anspringt und/oder abgewürgt wird, wodurch das Unfallrisiko steigt.

Safety Gate · EU · RappelConso · Frankreich28. Jan. 2022a12/00177/22Modelljahre 2017–2020Automatisch übersetzt · Original: FranzösischDetails ansehen →
CX-9 II (2013) · 2016–2023
RückrufMittelMotorNA

Kraftstoffsystem, Benzin: Förderung: Kraftstoffpumpe

Mazda North American Operations (Mazda) ruft bestimmte Fahrzeuge der Modelle 2018 Mazda3, Mazda6, 2019 CX-3, 2018–2019 MX-5, CX-5, CX-9 sowie 2019–2020 Mazda2 zurück. Das Laufrad in der Niederdruck-Kraftstoffpumpe kann reißen und sich verformen, wodurch die Kraftstoffpumpe möglicherweise ausfällt.

NHTSA · USA12. Nov. 202121V875000Modelljahre 2018–2019Automatisch übersetzt · Original: EnglischDetails ansehen →
CX-9 II (2013) · 2016–2023
RückrufMittelInnenraumNA

Seats:Mid/rear assembly

Mazda North American Operations (Mazda) is recalling certain 2020-2021 CX-9 vehicles equipped with 60/40 split bench second-row seats. The left-side second-row seat may unexpectedly slide forward during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages."

NHTSA · USA27. Sept. 202121V750000Modelljahre 2020–2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 II (2013) · 2016–2023
RückrufMittelFahrwerkNA

Tires:Tread/belt

Mazda North American Operations (Mazda) is recalling certain 2019 CX-9 vehicles equipped with Sumitomo Falken ZIEX CT50 A/S tires, size P255/50R20 104V, having date code 1619. An incorrect rubber compound may have been used in the tire's manufacturing, allowing the tread to separate and detach.

NHTSA · USA28. Okt. 201919V770000Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CX-9 I · 2006–2015
CX-9 I · 2006–2015
CX-9 I · 2006–2015
RückrufMittelElektrikNA

Electrical system:Wiring:Interior/under dash

Mazda is recalling 30,600 my 2007-2009 cx9 vehicles equipped with power adjustable seat with position memory function. The seat harness routed underneath the seat cushion may interfere with the front cover bracket which is attached on the front side of the seat cushion. Due to this the covering of the seat harness may be damaged, the core wire of the harness may touch with the bracket and result in short circuit.

NHTSA · USA23. Feb. 200909V066000Modelljahre 2007–2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).