Bulletin
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Mazda 2 (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.
Einige Fahrzeuge können beim Bremsen bei kaltem und feuchtem Wetter ein quietschendes Geräusch von den Vorderradbremsen zeigen. Aufgrund des erhöhten Widerstands der Beläge bei kalten Bedingungen vibrieren die Beläge leicht, was das Quietschen verursacht.
A/C blows warm air. Some customers may complain about warm air from the climate cointrol vents. This may be caused by improper brazing (A) of the evaporator (B) causing a refrigerant leak fr om the joint between the tubes and the header (D)
If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
Some vehicles may exhibit an unusual noise from around the drivers foot area when repeatedly turning the steering wheel to the left or right. A vibration is felt at the steering wheel when the noise occurs. This concern may be caused by a lack of grease application to the splines of the intermediate shaft at the production line. The grease application process has been improved.
Some customers may complain about any of the following 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.
Some vehicles may exhibit the check engine light ON with DTC P0300:00 (Random misfire detected) stored. This may be caused by a mis-detection of a misfire due to improper PCM control logic. To eliminate this concern, the PCM control logic has been modified.
Some customers may notice the charging lamp turns on while driving. Upon inspection, DTC P2502:00 PCM (Malfunction in voltage generated by generator) is stored in memory. This may be caused by resistance between the circuit board and ground. When high intensity electrical current passes through, the ground terminal position may not be sufficient enough. To eliminate this concern, the DC-DC converter control software has been modified. Additionally, the production procedure has been revised. The tightening torque for the ground terminal and circuit board was increased.
Some customers may experience a check engine light illumination at idle while stopped with DTC P0300:00 stored, resulting in rough idle conditions. P0300:00: Random misfire detected This concern is caused by improper engine control in the idle range. To eliminate the concern, the PCM control software has been modified.
Front/Rear stabilizer noise prevention
MultiModel (mit skyactivdrive ausgestattet) Verschlechterung der ATF-Farbe Neues Fahrzeug: Die Farbe des Automatikgetriebeöls (ATF) ist blau. Mit zunehmender Fahrzeugkilometerleistung verändert sich die ATF-Farbe. Die Farbveränderung beeinträchtigt die Fahrzeugleistung nicht.
BSM Radar aiming cannot be performed after rightside BSM control module rekkplacement
Mazda Technical Service Bulletins March 2016 Some vehicles may exhibit the inner cloth (A) falling down at the rear end causing a poor appearance and obstructing the view of the back window.
Maintenance.
MAZDA CONNECTED SERVICES - HÄUFIG GESTELLTE FRAGEN (FAQ): Index: Allgemeine Fragen, Einrichtung und Erste Schritte, Registrierung / Anmeldung, WLAN-Allgemeine Informationen, WLAN-Anleitung, WLAN-Testzeitraum, Interaktion mit der App, Serviceprobleme, Fehlerbehebung, Überprüfung des Empfangspegels, Händlerprozesse, Bedingungen, unter denen der Fernstart des Motors nicht funktioniert, Bedingungen, unter denen die Fernstartfunktion den Motor AUSSCHALTET, Lehrvideos, Ressourcen
MAZDA CONNECTED SERVICES – HÄUFIG GESTELLTE FRAGEN (FAQ): Index: Allgemeine Fragen, Einrichtung und Einstieg, Registrierung / Anmeldung, WI-FI Allgemeine Informationen, WI-FI Anleitungen, WI-FI Testphase, Interaktion mit der App, Serviceprobleme, Fehlerbehebung, Inspektion auf Empfangsniveau, Händlerprozesse, Bedingungen für Fernstart des Motorstarts werden nicht funktioniert, Bedingungen für Fernstart des Motors werden den Motor AUSGESCHALTET, Bildungsvideos, Ressourcen
Some customers may experience the CHECK ENGINE light ON with DTC P0089:00 (Spill valve control solenoid valve control circuit range/performance problem) stored. This is caused by improper control software of the PCM detecting a false error, even with normal fuel pressure operation. To correct this issue, the control software of the PCM has been modified.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display. Replace the Active Driving Display.
Beginning with the CX-5 and Mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone. P2096:00 - Air fuel too lean P2097:00 - Air fuel too rich P0524:00 - Engine oil pressure too low. This concern may be caused by improper PCM control logic. The PCM software has been modified to eliminate this concern.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display.
New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.
Recall 0516j updated repair procedure
Windshield washer fluid change - Factory filled windshield washer fluid has been changed to an ethanol type (yellow color) instead of athe conventional methanol type (blue color). This change is for European compliance Mazda has decided to make the change for all markets.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).