Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Please be advised that the valve stem seals assigned to the 2.5 Skyactiv Turbo engines in GEPC are incorrect. The Diesel Valve Stem seal SH09-10-1F5A, which is for Diesel engines, is currently listed for these models in GEPC. Please ensure that the proper valve stem seals are used for the 2.5 Skyactiv Turbo engines affected by SSPD5 have the correct valve seal part number PY8W-10-1F5 installed on PYT engines to avoid any potential issues.
DO NOT use MDARS for CBCM configuration as it will cause other problems like ENGINE NO START. There is an error in MDARS program. This SA will be updated when there is more information.
Some 2014 mazda3 vehicles may exhibit a tapping noise from the no. 3 engine mount when driving on rough roads. A new and improved engine mount must be installed to eliminate the noise.
We write to inform you that certain vehicles are affected by the concern mentioned below. Vehicles affected by this DRW will be visible, June 9, 2018. VIN lists for the DRW14 will be uploaded to MGSS on June 8, 2018. Parts and Warranty information and inspection/repair procedures are expected next week and will be uploaded as soon as possible. Certain subject Mazda3 vehicles may have a casting flaw in the front cover fastening bolt hole of the engine block.
Mazda connect shuts down and does not reboot. Some vehicles may experience mazda connect infotainment system shutting down with a few minutes after ignition is turned on, and will not reboot. It will only reboot after ignition is turned off and then turned on again. This is caused by an internal malfunction of the connectivity master unit (cmu) hardware.
Mazda: Fuel inside high pressure fuel pump may be raised to higher temperature than usual, if stopped or idling 20 or more minutes due to using high evaporative winter fuel. Model 2012 mazda3. *pe updated 12/18/12. *pe updated 2/4/13. *pe
Engine no crank along with immobilizer malfunction. Diagnostic trouble codes p1260 (immobilizer system problem) and b1600/b1602 (key id number cannot be read) and/or u2516 (ic-can bus off transmit error) may be stored in memory. Mazda m-tips. *tt
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).