Aufgrund einer möglichen Verformung des Kraftstofftanks sind die Leitungen unter Umständen nicht ordnungsgemäß am Tank verschweißt, und diese Schweißnaht kann brechen. Es kann zu einem Kraftstoffaustritt kommen, wodurch das Brandrisiko steigt.
Das schlecht verschweißte Rückschlagventil am Kraftstofftank kann im Fahrbetrieb brechen. Dies kann zu Kraftstofflecks führen, wodurch das Brandrisiko steigt.
Door een onjuiste aansturing van het hydraulische kleppentrein kan de inlaatklep, tijdens bepaalde bedrijfsomstandigheden, in contact komen met andere inwendige bewegende motoronderdelen.
rdw8. Aug. 2019MGP190348Modelljahre 2019–2022Im Original (Niederländisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The lug nuts on all four wheels may loosen, potentially resulting in a wheel detaching from the vehicle.
NHTSA · USA7. Juni 201919V425000Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
De as van de vacuümpomp van het remsysteem kan afslijten, de stoom in het stuurcircuit van de injector kan te hoog oplopen en de bevestigingsmoeren van de injectoren zijn mogelijk onvoldoende vastgezet.
Het regelcircuit van de brandstofinjectie kan met een te hoge elektrische stroom worden belast. Dit kan leiden tot kortsluiting in het regelcircuit en uitvallen van de brandstofinjectie.
De lasnaad van de brandstofinlaatregelklep aan de brandstoftank is mogelijk onjuist uitgevoerd. Hierdoor kan de lasnaad van de inlaatregelklep scheuren.
rdw19. Juni 2017MGP170314Modelljahre 2015–2016Im Original (Niederländisch) angezeigt · Übersetzung ausstehendDetails ansehen →
null The plastic connector between the fuel tank and the vent hose nipple may break, causing fuel to leak which could lead to a fire. Fuel leaking on to the road may cause a hazard for following vehicles.
Safety Gate · EU10. März 2017A12/0323/17Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mazda North American Operations (Mazda) is recalling certain model year 2016 Mazda3 vehicles manufactured September 24, 2015, to October 16, 2015. During manufacturing, the fuel tanks for the affected vehicles may have deformed, resulting in a fuel leak from the recirculation pipe welded connection.
On certain vehicles. the fuel tank may contain a defect which could allow a weld to break, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel tank and replace if necessary.
Transport Canada22. Sept. 20162016465Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles. the fuel tank may contain a defect which could allow a weld to break, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel tank and replace if necessary.
Transport Canada22. Sept. 20162016464Modelljahre 2014–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
Mazda North American Operations (Mazda) is recalling certain model year 2015-2016 Mazda3 vehicles manufactured May 21, 2015, to August 25, 2015. The affected vehicles are equipped with a fuel tank with a shut-off valve that can allow fuel to enter into the fuel tank emissions systems. If enough fuel enters the emission system it may leak out onto the ground or result in an engine stall.
Am Beifahrer-Hilfsbremspedal von Fahrschulfahrzeugen besteht das Problem, dass der Sicherungsspreizstift zur Verhinderung des Herausrutschens des Kupplungsbolzens (Clevis-Pin) am Bremspedal aufgrund einer unzweckmäßigen Konstruktion je nach Einsatzbedingungen herausrutschen kann. Wird das Fahrzeug in diesem Zustand weiterbenutzt, kann der Kupplungsbolzen vom Pedalarm abfallen, wodurch die Beifahrer-Hilfsbremse möglicherweise nicht mehr funktioniert.
Mazda North America Operations (Mazda) is recalling certain model year 2014 Mazda3 vehicles manufactured June 12, 2013, through December 18, 2013, and model year 2014-2015 Mazda6 vehicles manufactured May 20, 2013, through December 4, 2013, and both equipped with a 2.5L engine and a regenerative engine braking system. When driving the affected vehicles in heavy rain or in deep puddles, the alternator belt may slip causing the Power Control module (PCM) to incorrectly assume failure of the charging system.
On certain vehicles, a part of the headlight housing where the Daytime Running Light (DRL) bulb is attached may be damage by heat from the bulb when the vehicle is left idling for an extended period or while driving in slow-moving traffic. In the worst case, the housing may be deformed, resulting in bulb becoming detached and loss of DRL functionality. A loss of DRL illumination could render the vehicle less visible to other motorists and to pedestrians during daylight hours, possibly resulting in a crash causing personal injury or death. Correction: Dealers will affect repairs.
Transport Canada10. Aug. 20092009232Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).