Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mercedes-BenzMercedes-Benz C-Klasse W206

2021– · 7 dokumentierte Mängel · 3 Märkte

Diese Akte sammelt die bekannten Mängel des Mercedes-Benz C-Klasse W206, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.

Halter melden bei diesem Auto häufig Probleme mit electrical system (21 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit automatic emergency braking (17 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen

Schwerwiegendste Mängel

Alle ansehen (7) →
m
KritischBremsenNA

Brakes: problems reported by owners

13 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2022–2025), typically at around 20,000 miles. Reported consequences: 3 crashes, 1 injury.

✓ Mecafile-Auswertung amtlicher Daten2022–2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
MittelElektrikNA

Electrical system: problems reported by owners

21 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2022–2026), typically at around 6,000 miles. Reported consequences: 1 injury.

✓ Mecafile-Auswertung amtlicher Daten2022–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
MittelElektrikNA

Automatic emergency braking: problems reported by owners

17 owners in the United States reported problems with the automatic emergency braking of this car to NHTSA (model years 2022–2024), typically at around 6,000 miles. Most often named: automatic emergency braking (59%), warnings (35%), adaptive cruise control (24%). Reported consequences: 2 crashes.

✓ Mecafile-Auswertung amtlicher Daten2022–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Rückrufe

Alle ansehen (130) →
RückrufKritischElektrikEU

Des boulons de raccordement au sol spécifiques de 12v et 48v peuvent avoir été fixés avec un couple…

Des boulons de raccordement au sol spécifiques de 12v et 48v peuvent avoir été fixés avec un couple incorrect, ce qui peut conduire à ce que les faisceaux de câblage ne soient pas correctement fixés. en conséquence, la résistance électrique aux points de connexion pourrait augmenter. la température peut donc augmenter dans cette zone, entraînant un incendie.

Safety Gate · EU · RappelConso · Frankreich27. Aug. 2026sr/02875/25Modelljahre 2024Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufGeringKarosserieNA

Structure

Issue: On certain vehicles, moisture could enter the driver-side door lock microswitch and cause it to corrode. As a result, the microswitch may fail to automatically engage the parking brake and/or the auto park feature when the door is opened. If this happens, the vehicle could roll away. Note: This problem could also cause the radio and/or interior lights to remain on after exiting the vehicle. Safety Risk: A parked vehicle that rolls away could create the risk of an injury or a crash. Corrective Actions: To reduce the safety risk, Mercedes-Benz recommends that you should always use the parking brake when you park. Mercedes-Benz will notify owners by mail and advise you to take your vehicle to a dealership to replace the driver-side door lock.

Transport Canada24. Juli 20262026364Modelljahre 2022–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelKarosserieNA

Latches/locks/linkages:Doors:Lock

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2020-2021 CLA, 2019-2022 A-Class, 2022-2023 C-Class, 2024 CLE, 2020-2026 GLA/GLB, and 2023-2024 GLC vehicles. Please refer to MBUSA's recall report for specific model information. The micro-switch in the driver's door lock may corrode and fail to detect an open door, preventing the electronic parking brake or "Auto-Park" feature from engaging automatically. This may result in a vehicle rollaway.

NHTSA · USA24. Juli 202626V481000Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste technische Bulletins

Alle ansehen (374) →
BulletinGeringKarosserieNA

Bulletin

Complaint Wheezing noises/squeaking noises from the front shock absorbers when passing over surface undulations and rough road. Noise MUST match those heard in the attached videos. Cause Wheezing noises: Flow noises of the damper oil Squeaking noises: From the mechanical rubber valve in the dividing piston Remedy In case of complaints, the front shock absorbers must be replaced. If shocks have been replaced and noise persists, please open a TIPS case to the Body, Chassis, Entertainment inbox.

NHTSA · Herstellerbulletin11039086Modelljahre 2024–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Complaint Diverse functional limitations in the vehicle in combination with various warning and fault messages in the instrument cluster display. Cause Communication timeouts mean that communication errors may occur in the onboard electrical system, which can result in various fault messages being displayed in the instrument cluster. This could be down to delayed feedback from the drivetrain control unit (N127) (CPC) to other control units networked to the CAN bus. Information: Only valid for vehicles through production period 10/2025. Not valid for vehicles with control unit CDCC (N125, central controller charging and driving) It may not be possible to attribute any communication errors stored in the control units on the CAN bus to a specific cause In rare instances, there may be a brief activation of the yellow warning lamp for engine diagnosis or there may be a sporadic delay with the start enable. There may not be any specific fault codes present that indicate a specific component. Example image: Fault messages in instrument cluster: The reason for this could be down to delayed feedback from the control unit CPC3 to other control units networked on the CAN bus. Remedy Do not replace any components!!! ******************************************************************************************************* 1. Connect charger (see AR54.10P1127WT). Note: An adequate voltage from the onboard electrical system battery must be guaranteed for the entire duration of the work procedure. Otherwise, the control units could be damaged if an undervoltage occurs. Information: Observe the operating instructions of the charger. Information: Use the charger to ensure an adequate voltage (at least 12.5 V) from the onboard electrical system battery. 2. Connect diagnostic system (see AD00.00P200006FR). Note: Always use the latest XENTRY Diagnostics software release. Information: Strict compliance with the operation steps in XENTRY Diagnostics is absolutely essential. 3. Select control unit N127 (CPC) via the direct link using XENTRY Diagnosis. Information: To do so, select the following menu items: Control units view Drive systems N127 "Drivetrain" control unit (CPC) 4. Update software for control unit N127 (CPC) (see AR54.21P001401Y). Info: To do so, select the following menu items: Adaptations Control unit update Update control unit software. Information: You are then automatically guided through the steps "Update of control unit software" and "SCN coding". Always observe the following operation steps at all times 5. Disconnect diagnostic device from vehicle (see AD00.00P200006FR). 6. Disconnect charger from vehicle (see AR54.10P1127WT).

NHTSA · Herstellerbulletin11038925Modelljahre 2023–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Issue A software update will be performed that provides enhancements to the robustness and system stability of the communication module. The update is free of charge and runs in the background, which takes about 8 minutes to install. During this time, the vehicle can be driven without any restrictions, and the new software will be active with the next ignition cycle. Remedy MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customers vehicle free of charge and do not require a dealer visit.

NHTSA · Herstellerbulletin11038909Modelljahre 2024–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).