Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mercedes-BenzMercedes-Benz CLS-Klasse C219

2003–2010 · 17 dokumentierte Mängel · 3 Märkte

Diese Akte sammelt die bekannten Mängel des Mercedes-Benz CLS-Klasse C219, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.

Halter melden bei diesem Auto häufig Probleme mit fuel system (88 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit brakes (33 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen

Schwerwiegendste Mängel

Alle ansehen (17) →
m
KritischGetriebeNA

Transmission and drivetrain: problems reported by owners

14 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 2006–2009), typically at around 34,000 miles. Most often named: automatic transmission (43%). Reported consequences: 5 injuries.

✓ Mecafile-Auswertung amtlicher Daten2006–2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischInnenraumNA

Airbags: problems reported by owners

13 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2006–2009), typically at around 83,000 miles. Most often named: frontal (15%). Reported consequences: 5 crashes, 6 injuries.

✓ Mecafile-Auswertung amtlicher Daten2006–2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischElektrikNA

Electrical system: problems reported by owners

12 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2006–2009), typically at around 50,000 miles. Reported consequences: 1 fire.

✓ Mecafile-Auswertung amtlicher Daten2006–2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Rückrufe

Alle ansehen (40) →
RückrufMittelFahrwerkEU

The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive…

The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident.

Safety Gate · EU17. Dez. 2024SR/03711/24Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelKarosserieNA

Visibility:Sun/moon roof assembly

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

NHTSA · USA19. Nov. 202424V874000Modelljahre 2006–2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelKarosserieJP

車体

スライディングルーフのガラスパネルにおいて、製造管理が不適切なため、接着強度が不十分なものがある。そのため、ガラスパネルに浮きが発生し、最悪の場合、走行風により脱落して、後続車両の妨げになるおそれがある。

MLIT · Japan22. Juni 20231236290Modelljahre 2002–2010Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste technische Bulletins

Alle ansehen (106) →
BulletinGeringKarosserieNA

Bulletin

Beschwerde: Klapperndes Geräusch aus dem Bereich der Lautsprecher in den Türen. Ursache: In Analyse. Abhilfe: Zur Eingrenzung der Ursache zuerst die Türverkleidung entfernen. Wenn das Geräusch auch bei entfernter Türverkleidung weiterhin auftritt, die Diagnose in Richtung Lautsprecher fortsetzen und gegebenenfalls einen TIPS-Fall mit einem aussagekräftigen Video als Anhang erstellen. Hinweis: Bitte dieses Dokument im Garantieantrag angeben und nach Abschluss der Diagnose den Schadenscode entsprechend dem Bauteil auswählen, das das Problem verursacht. Wenn das Geräusch bei entfernter Türverkleidung aufhört, bitte gemäß LI72.10P067691 vorgehen. Information: In diesem Fall keinen Schadenscode für die Lautsprecher im Garantieantrag verwenden!

NHTSA · Herstellerbulletin11038217Modelljahre 2006Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelBremsenNA

Bulletin

## Beanstandung Wiederholter Werkstattbesuch wegen Fahrzeugvibration beim Bremsen aus 60 MPH. HINWEIS: Obwohl das Symptom einer Reifen- oder Radvibration ähnlich ist, ist meist deutlich erkennbar, ob es sich unterscheidet, je nachdem, ob es immer oder nur beim Bremsen auftritt. ## Ursache Die Ursache der Vibration liegt höchstwahrscheinlich an übermäßigem seitlichem Schlag der Bremsscheibe oder des Radnabenlagers. Das gesamte System muss jedoch auf andere mögliche Ursachen überprüft werden: 1. Vorheriger Unfallschaden. 2. Übermäßig lange Standzeiten ohne Drehen der Bauteile. 3. Seitlicher Schlag des Radlagers/der Radnabe. 4. Die Radanlagefläche wurde überdreht (WIS-Anzugsverfahren nicht eingehalten). 5. Die Anlageflächen wurden übermäßig verändert (lackiert, eingeschlagen, verbogen usw.). ## Abhilfe Lesen Sie das gesamte beigefügte Arbeitsblatt vor der Durchführung vollständig durch. Nach der Durchführung prüfen Sie bitte die letzte Seite und führen die Arbeiten entsprechend aus. HINWEIS: Dieses Dokument ist keine Vorabgenehmigung und betrifft keine Garantie. Es dient ausschließlich Diagnosezwecken. Falls Fragen zum weiteren Vorgehen bestehen ODER das Arbeitsblatt durchgeführt wurde und das Fahrzeug mit demselben Problem zurückkommt, führen Sie die Messungen wie im Arbeitsblatt erneut durch und eröffnen Sie einen TIPS-Fall für das Team Karosserie, Fahrwerk und Entertainment.

NHTSA · Herstellerbulletin11038186Modelljahre 2006Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelBremsenNA

Bulletin

Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy The intent of this document is to reduce noise from high performance AMG brakes. AMG brakes are designed for performance under high load and in certain scenarios, can emit noise. Some scenarios are normal and some are induced by driving style like those listed below: Driving style such as two footed driving where the pad might be in constant contact with the rotor. Brake pressure and application style (stopandgo traffic with consistent light brake pressure riding brakes where the brakes cannot cool sufficiently between applications). This can cause the brake pads to glaze and have a smooth/glassy surface which can induce noise. When ambient temperatures rise during summer peak and during cooling and cold winter months. 1. Beginning Diagnostics: a) Check whether the complaint can be reproduced and at which axle or side the noises occur (ideally together with the customer while driving). b) Check the affected system for component wear, mechanical damage or localized overheating damage. Replace damaged components as necessary. c) Assess condition of brake rotors and pads per WIS and visually (i.e. long periods of stagnation, etc...). d) Clean brake components free of brake dust and debris. d) Secure vehicle on a lift. 1. Start the engine and depress the brake pedal 34 times. 2. Check each wheel to see if they turn freely by hand. 3. If a wheel is not turning freely by hand, this needs to be addressed prior to reassessing the noise concern. e) Check whether, apart from this document, an additional document exists for the specific model in question, and if so, work through it and then continue. 2. Specific Axle Work: NOTE: If the brake pad has a metal backing plate, there is no need to affix the adhesive film. Continue with applying chamfer and Molykote as instructed below. IMPORTANT: Be absolutely certain to not allow paste between friction surfaces of the pad and disc! a) If the noises are coming from the front axle. 1. Remove brake linings of front axle. 2. Clean all contact points on brake lining backing plate, including the brake lining guide pins and brake caliper/carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining where the piston contacts the pad backing plate. See picture "Adhesive and Paste Application Area". 4. Be sure to remove both brown paper backing sides of the adhesive film, it is double sided adhesive film. 5. If adhesive is already installed on backing plate where pistons contact the back of the pad, you may gently scrape off and reapply a new adhesive or Molykote. Must not apply the Molykote on top of the adhesive. 6. Chamfer edges (gently round off sharp leading edges) on brake pads. Some pads have vertical grooves, these can be gently chamfered with a triangular file as well. See picture "Chamfering Technique". 7. Apply Molykote to the sides of the backing plate. See picture "Adhesive and Paste Application Area". 8. After installing the brake linings, actuate the brake for 30 seconds. b) If the noises are coming from the rear axle. 1. Remove brake pads of rear axle. 2. Clean all contact points on brake lining backing plate and brake caliper /carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining. 4. Chamfer edges (round off sharp leading edges) on brake pads. See picture "Chamfering Technique". 5. Grease contact points (red areas on attachment "Rear Pad Grease Area") between brake lining and guide of brake caliper with Molykote. 3. Brake Bedding Process: a) Before trip, the mileage incurred must be clarified with the customer (approx. 30 miles). b) Select a suitable route so speeds of approximately 65 MPH can be achieved. c) If the vehicle is an AMG P3 Hybrid, switch off

NHTSA · Herstellerbulletin11037487Modelljahre 2006Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).