Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mercedes-BenzMercedes-Benz E-Klasse V213

2016–2023 · 22 dokumentierte Mängel · 3 Märkte

Diese Akte sammelt die bekannten Mängel des Mercedes-Benz E-Klasse V213, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.

Halter melden bei diesem Auto häufig Probleme mit engine (93 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit electrical system (84 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen

Schwerwiegendste Mängel

Alle ansehen (22) →
m
KritischMotorNA

Engine: problems reported by owners

93 owners in the United States reported problems with the engine of this car to NHTSA (model years 2016–2023), typically at around 23,000 miles. Reported consequences: 10 fires, 1 injury.

✓ Mecafile-Auswertung amtlicher Daten2016–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischElektrikNA

Electrical system: problems reported by owners

84 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2016–2023), typically at around 18,000 miles. Reported consequences: 6 fires, 3 injuries.

✓ Mecafile-Auswertung amtlicher Daten2016–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischInnenraumNA

Airbags: problems reported by owners

57 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2016–2019), typically at around 10,000 miles. Reported consequences: 7 crashes, 6 injuries.

✓ Mecafile-Auswertung amtlicher Daten2016–2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Rückrufe

Alle ansehen (540) →
RückrufMittelGetriebeKR

동력전달장치 기타

공급업체의 생산 공정의 편차로 인해 시간이 지남에 따라 드라이브 샤프트의 유니버셜 조인트가 마모될 수 있으며, 이로 인해 유니버셜 조인트에서 윤활유 손실이 발생하여 유니버셜 조인트가 파손될 수 있음. 그 결과로 트랜스퍼 케이스와 전륜 구동 장치 간의 연결이 끊어져 추진력을 잃을 수 있고 충돌 위험이 증가할 수 있음이 확인됨에 따른 리콜 <대상차량별 생산일자> S 450 4MATIC: 2018.01.25~2019.11.14 S 560 4MATIC: 2019.08.30~2019.09.12 CLS 400 d 4MATIC: 2019.02.25~2019.04.11 S 350 d 4MATIC: 2019.04.09 E 450 4MATIC: 2019.02.05 S 400 d 4MATIC: 2017.12.11

MOLIT · Südkorea30. Sept. 20266389Modelljahre 2017–2019Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelGetriebeUK

SRPC2603 - Drive Shaft Joint

Mercedes-Benz AG has determined that on certain 4MATIC E-Class (213 platform) S-Class Coupé (217 platform) S-Class (222 platform) E-Class Coupe/Convertible (238 platform) GLC (253 platform) and CLS (257 platform) vehicles increased wear of the universal joint on the drive shaft might occur.

DVSA · Vereinigtes Königreich21. Sept. 2026R/2026/148Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischFahrwerkEU

Motorrijtuigen en aanhangwagens - stuurinrichting

De drie aluminium schroeven waarmee de power-pack aan de stuurinrichting is bevestigd, kunnen door blootstelling aan water en strooizout roesten.

rdw28. Aug. 2026MGP230033Modelljahre 2016Im Original (Niederländisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste technische Bulletins

Alle ansehen (488) →
BulletinMittelFahrwerkNA

Bulletin

Complaint Diverse functional limitations in the vehicle in combination with various warning and fault messages in the instrument cluster display. Cause Communication timeouts mean that communication errors may occur in the onboard electrical system, which can result in various fault messages being displayed in the instrument cluster. This could be down to delayed feedback from the drivetrain control unit (N127) (CPC) to other control units networked to the CAN bus. Information: Only valid for vehicles through production period 10/2025. Not valid for vehicles with control unit CDCC (N125, central controller charging and driving) It may not be possible to attribute any communication errors stored in the control units on the CAN bus to a specific cause In rare instances, there may be a brief activation of the yellow warning lamp for engine diagnosis or there may be a sporadic delay with the start enable. There may not be any specific fault codes present that indicate a specific component. Example image: Fault messages in instrument cluster: The reason for this could be down to delayed feedback from the control unit CPC3 to other control units networked on the CAN bus. Remedy Do not replace any components!!! ******************************************************************************************************* 1. Connect charger (see AR54.10P1127WT). Note: An adequate voltage from the onboard electrical system battery must be guaranteed for the entire duration of the work procedure. Otherwise, the control units could be damaged if an undervoltage occurs. Information: Observe the operating instructions of the charger. Information: Use the charger to ensure an adequate voltage (at least 12.5 V) from the onboard electrical system battery. 2. Connect diagnostic system (see AD00.00P200006FR). Note: Always use the latest XENTRY Diagnostics software release. Information: Strict compliance with the operation steps in XENTRY Diagnostics is absolutely essential. 3. Select control unit N127 (CPC) via the direct link using XENTRY Diagnosis. Information: To do so, select the following menu items: Control units view Drive systems N127 "Drivetrain" control unit (CPC) 4. Update software for control unit N127 (CPC) (see AR54.21P001401Y). Info: To do so, select the following menu items: Adaptations Control unit update Update control unit software. Information: You are then automatically guided through the steps "Update of control unit software" and "SCN coding". Always observe the following operation steps at all times 5. Disconnect diagnostic device from vehicle (see AD00.00P200006FR). 6. Disconnect charger from vehicle (see AR54.10P1127WT).

NHTSA · Herstellerbulletin11038925Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringKarosserieNA

Bulletin

Beschwerde: Klapperndes Geräusch aus dem Bereich der Lautsprecher in den Türen. Ursache: In Analyse. Abhilfe: Zur Eingrenzung der Ursache zuerst die Türverkleidung entfernen. Wenn das Geräusch auch bei entfernter Türverkleidung weiterhin auftritt, die Diagnose in Richtung Lautsprecher fortsetzen und gegebenenfalls einen TIPS-Fall mit einem aussagekräftigen Video als Anhang erstellen. Hinweis: Bitte dieses Dokument im Garantieantrag angeben und nach Abschluss der Diagnose den Schadenscode entsprechend dem Bauteil auswählen, das das Problem verursacht. Wenn das Geräusch bei entfernter Türverkleidung aufhört, bitte gemäß LI72.10P067691 vorgehen. Information: In diesem Fall keinen Schadenscode für die Lautsprecher im Garantieantrag verwenden!

NHTSA · Herstellerbulletin11038217Modelljahre 2018–2023Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Complaint Slight creaking noises when steering. Cause Noises may come from one or more sleeves of the horn contact plate. Remedy Remove the horn contact plate and check the sleeves for noise; see attached video. If necessary, apply lubricant to the sleeves.

NHTSA · Herstellerbulletin11038188Modelljahre 2017–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).