Engine: problems reported by owners
202 owners in the United States reported problems with the engine of this car to NHTSA (model years 2016–2022), typically at around 11,000 miles. Reported consequences: 4 crashes, 11 fires, 2 injuries.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Mercedes-Benz GLC (alle generationen) erhalten
Alles zum Mercedes-Benz GLC, alle Generationen zusammen: Mängel, Rückrufe, Servicemitteilungen und Diskussionen. Wählen Sie eine Generation, um einzugrenzen.
202 owners in the United States reported problems with the engine of this car to NHTSA (model years 2016–2022), typically at around 11,000 miles. Reported consequences: 4 crashes, 11 fires, 2 injuries.
97 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2016–2022), typically at around 10,000 miles. Reported consequences: 3 crashes, 9 fires, 2 injuries.
52 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2016–2022), typically at around 6,000 miles. Reported consequences: 6 crashes, 3 injuries.
43 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2015–2022), typically at around 50,000 miles. Reported consequences: 12 crashes, 14 injuries, 1 death.
40 owners in the United States reported problems with the steering of this car to NHTSA (model years 2016–2022), typically at around 6,000 miles. Reported consequences: 5 crashes, 2 injuries.
De noodoproepfunctie in de communicatiemodule is mogelijk niet geactiveerd.
Mercedes-Benz AG has determined that on certain CLA (174 178 platform) GLB (244 platform) and GLC (540 platform) vehicles the emergency call function within the communication module might not be enabled.
Mercedes-Benz AG has determined that on certain 4MATIC E-Class (213 platform) S-Class Coupé (217 platform) S-Class (222 platform) E-Class Coupe/Convertible (238 platform) GLC (253 platform) and CLS (257 platform) vehicles increased wear of the universal joint on the drive shaft might occur.
Complaint Customer would like to activate "Digital Key". Cause "Digital Extra" was not available during launch period of vehicle. Remedy Follow SI80.61P0005A. When going into the N73/3 (EZS) and flashing, it will push the entire ECU software package needed to turn on the feature (CIVIC, MAU, CGW, and EZS). Please note this is only applicable to vehicles with SA code 896. Please ensure DC 8040001 is utilized.
Complaint Wheezing noises/squeaking noises from the front shock absorbers when passing over surface undulations and rough road. Noise MUST match those heard in the attached videos. Cause Wheezing noises: Flow noises of the damper oil Squeaking noises: From the mechanical rubber valve in the dividing piston Remedy In case of complaints, the front shock absorbers must be replaced. If shocks have been replaced and noise persists, please open a TIPS case to the Body, Chassis, Entertainment inbox.
Complaint Diverse functional limitations in the vehicle in combination with various warning and fault messages in the instrument cluster display. Cause Communication timeouts mean that communication errors may occur in the onboard electrical system, which can result in various fault messages being displayed in the instrument cluster. This could be down to delayed feedback from the drivetrain control unit (N127) (CPC) to other control units networked to the CAN bus. Information: Only valid for vehicles through production period 10/2025. Not valid for vehicles with control unit CDCC (N125, central controller charging and driving) It may not be possible to attribute any communication errors stored in the control units on the CAN bus to a specific cause In rare instances, there may be a brief activation of the yellow warning lamp for engine diagnosis or there may be a sporadic delay with the start enable. There may not be any specific fault codes present that indicate a specific component. Example image: Fault messages in instrument cluster: The reason for this could be down to delayed feedback from the control unit CPC3 to other control units networked on the CAN bus. Remedy Do not replace any components!!! ******************************************************************************************************* 1. Connect charger (see AR54.10P1127WT). Note: An adequate voltage from the onboard electrical system battery must be guaranteed for the entire duration of the work procedure. Otherwise, the control units could be damaged if an undervoltage occurs. Information: Observe the operating instructions of the charger. Information: Use the charger to ensure an adequate voltage (at least 12.5 V) from the onboard electrical system battery. 2. Connect diagnostic system (see AD00.00P200006FR). Note: Always use the latest XENTRY Diagnostics software release. Information: Strict compliance with the operation steps in XENTRY Diagnostics is absolutely essential. 3. Select control unit N127 (CPC) via the direct link using XENTRY Diagnosis. Information: To do so, select the following menu items: Control units view Drive systems N127 "Drivetrain" control unit (CPC) 4. Update software for control unit N127 (CPC) (see AR54.21P001401Y). Info: To do so, select the following menu items: Adaptations Control unit update Update control unit software. Information: You are then automatically guided through the steps "Update of control unit software" and "SCN coding". Always observe the following operation steps at all times 5. Disconnect diagnostic device from vehicle (see AD00.00P200006FR). 6. Disconnect charger from vehicle (see AR54.10P1127WT).
Mängel und Diskussionen werden pro Generation geführt: Wählen Sie oben eine aus, um Ihren Beitrag hinzuzufügen.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).